Custom Built rockcrawler built by Monkey Bars of Northern California. He has built the razor chassis rigs. This is a very capable crawler that I just don't have time for right now and can't justify keeping it when I can't use it more frequently.

· Tube buggy with C-J7 fiberglass skins
· 103” Wheelbase
· Custom Frame - Full tube cage, tube fenders, tubed rear.
· Dana 60’s Front and Rear - Dana 60 in the front 64: wide 35 spline inter and outer, with spare short side axle and a couple of 30 spline outers with hubs. Arb in the front 6.17 gears. Rear 35 spline dana 60. 6.17 gears and a spool. Have one spare rear 35 spline axle.
· 300 hp mustang 302 5.0 Liter motor , Fuel Injected – Tons of Power
· leaf spring front and rear 4404s
· Swayaways shocks 12" travel
· 15x8 beadlocks and newer 37" goodyears mtrs w/ mounted spare.
· Hydro assisted steering
· 435 4 speed trans, and extra c-6 tranny
· dana 300 with the big output shafts
· rear cv drive line with a spare
· front long travel drive line with spare
· Beard seats w/ 5 pt. Harnesses
· 9000lb warn winch with blue winch rope
· Raised fuel cell
· Rocklights
· Custom Paint on Hood
· More spare parts

I have a lot more pics so let me know if you want to see them.

Price is $11,000. Or I would possibly trade for a motorcycle - chopper, harley, or custom harley type bike.

I can go a few different ways with delivery if you can't pick it up. We can discuss if you are interested.

Hit me up here or call me at 801-913-8270.

Thanks,

Matt

a few more pics...

Very cool rig. What would it take to make it street-legal if that's even possible? Any known problems?

Interest in a customized Ducati Monster 900 with low miles?
dion

Very cool rig. What would it take to make it street-legal if that's even possible? Any known problems?

Interest in a customized Ducati Monster 900 with low miles?
dion

Thanks Dion. I don't know if this thing could be street legal. It would have to be done under one of those custom vehicle programs which differ from state to state. It would probably need fenders, brake lights, turn signals, etc.

The monster is a really nice bike, but I'm just looking for more of a hog type setup. Let me know if you have any other questions.

They don't call Ducati "the Italian Harley-Davidson" for nothing :D.

I'd imagine wiring for lights, signals and whatnot would do the trick in AZ as long as the vehicle has a normal title and would pass emissions.

Well, good luck in your sale. Let me know if you change your mind or would like to see the bike. I was talking bike plus cash, if that helps.
d

Btt

Are the beadlock rings alum. or steel?

Are the beadlock rings alum. or steel?


The beadlocks are steel.

What year was it built?

Nice by the way. :smokin:

1973 Nice Bronco for Buggy Trade (Avalanche Engineering Elliptical Rear)

--------------------------------------------------------------------------

I am willing to trade my 1973 Ford Bronco for a buggy and Ill throw some cash in there too.

The bronco is really nice and worth around 12k with the Mods Ive put on it and it has NEVER BEEN WHEELED. I have had alot of work done to it in the past few months since I was planning to use it as a really cool style driver / light wheeler but I lost interest in it and want a buggy now. It has great parts:



1973 Ford Bronco


Has the Following Features Newly Installed :
NV3550 transmission and adapters
Includes all components listed separately below:
#3671 NV 3550 Transmission for Early Bronco swap, $1500.00
#3672 NV3550 to Dana 20 Transfercase and T-case shifter bracket, $478.00
#3673 Adapter from transmission to stock Bellhousing and clutch disk, $273.00
#3674 Crossmember mounting kit, $178.00
#3675 Shifter knob, $14.00
#3676 Shifter Handle, $53.00

Avalanche Engineering 1-4 Elliptical Rear Suspension Kit Installed $2500 dollar value installed
Kits Include the Follow:
1 Set 1/4 Elliptic Springs
1 Set of Mounting Boxes
1Set of New Shocks
1 Diff. Hoop
1 Set of 4 Links with Hiems Joints
All Mounting Hardware

Increased Capacity Metal Gas Tank 23 Gallon
Made of 16 gauge electro-galvanized steel for strength and rust protection these increased capacity tanks come complete with sending unit and mounting hardware. All have outlets for emission controls and return line fittings for fuel injection conversions. Main tank capacity is increased to 23 gallons
#4401 Main 23 gal. Metal Tank, $393.50

PreRunner Front Bumper Bumper W/Tabs & Side Gaurds

PreRunner Rear Bumper W/ Hitch, Tire & Gas Rack

Fully Built Family Rollcage to Protect all Passengers with Side Grab Bars in
rear, Spreader Bars on Top

Dana 44 Front Axle

Ford 9 inch Rear Axle Strengthened

Six Inch Lift

Power Brakes

Frame Sanded and Painted

Power Steering

Six inch front lift springs Installed

Rebuilt 302

Painted Roll Cage

Brand New Carburator

Brand New Flowmaster Exhaust

Hard Top

Tonneau Top

Big Tach

New Seats

Functioning Dash Guages



Really nice looking too. If your interested let me know and Ill send some pics. Ill also try to post some tomorrow

What year was it built?

Rocks, it was built in 2002.

1973 Nice Bronco for Buggy Trade (Avalanche Engineering Elliptical Rear)

--------------------------------------------------------------------------

I am willing to trade my 1973 Ford Bronco for a buggy and Ill throw some cash in there too.

The bronco is really nice and worth around 12k with the Mods Ive put on it and it has NEVER BEEN WHEELED. I have had alot of work done to it in the past few months since I was planning to use it as a really cool style driver / light wheeler but I lost interest in it and want a buggy now. It has great parts:


Really nice looking too. If your interested let me know and Ill send some pics. Ill also try to post some tomorrow


Rocks, I'm not sure I'm looking to trade for another 4x4, but post a pic up, you never know...

Pics are at the following:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=2484697415&ssPageName=STRK:MESE:IT

I never got those additional pics you were gonna send me on this buggy but its still a very good deal on your buggy so:

Bump for U.