okay, I got the chevies in now and the toy is driving into the ground.


whats a good way to get 4-5" of lift, cheap, fabbed, or cheap.


will i need to do some steering stuff too?


also, how do you adjust for pinion angle in the front and still have good caster?

If you only go with 4 inches or so and you do it right you wont need to worry about changing your pinion angle. I have around 4-5 inches in the front and get VERY little vibes. To rotate change the pinion angle you will need to rotate the knuckles which is not a super easy task. Crossover steering wouldnt be a bad way to do it. Look in the FAQ in the toyota section and find the thread on toyota rear springs up front. If you still have your rear springs you can put them on the front if you add a few leaves from another pack to stiffen them up. The FAQ in the toy section has enough info to build a rockcrawler from the bottom up if you have fab skills.