|
: detroit for $500 or spool for $200 redruM 01-23-2002, 04:43 AM ordering parts today for my 60 front and 61 rear 5.13 Precision Gears Master install Kits Detroit lockers Front and Rear last question before i send the order...should i change the rear locker for a spool and put 300 in my pocket ? High5 01-23-2002, 05:41 AM yes!!!:D spool it and forget it. use full detroit for the front. just my op. 1TONTJ 01-23-2002, 05:51 AM Don't order yet. Email what you want exactly, and I will see if I can use my influence to save you some money. What are you paying for the stuff with the place you quoted? Phil redruM 01-23-2002, 06:25 AM opinion do i need to hook up the vaccume disconect for the front 60? this will only disconect one (pass side) tire right that will not help turning (maybe one direction) (my TJ disconects power in the t-case to the front axle... it does not have hubs or a vaccume disconect axle) Brian big4294x4 01-23-2002, 06:26 AM :D :D :D Spool it. :D :D :D cowmooflage 01-23-2002, 07:05 AM Weld 'em and save all your money:flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: The Rockslut 01-23-2002, 09:54 AM Spool Jeepmangled87 01-23-2002, 10:15 AM Why would you not spool the rear it so easy and cheap.:smokin: :beer: :skull: AGGIECJ-7 01-23-2002, 11:19 AM i say weld it for free......surely you have a friend with a welder palmer 01-23-2002, 08:41 PM A spool is the only way to go! I have been running one in mine for over two years now. :beer: :beer: :beer: :beer: NE-RokToy 01-23-2002, 11:54 PM Originally posted by redruM opinion do i need to hook up the vaccume disconect for the front 60? this will only disconect one (pass side) tire right that will not help turning (maybe one direction) (my TJ disconects power in the t-case to the front axle... it does not have hubs or a vaccume disconect axle) Brian I would try and get a 1 peice shaft in place of that disconect setup, definatly a good source for a future week link. Also the only way a TJ disconects the front end is by putting it in 2x4 I don't see what your trying to say by saying your TJ disconects power in the T-case, thats how ALL part time 4x4 systems work. redruM 01-24-2002, 05:32 AM Originally posted by NE-RokToy TJ disconects the front end is by putting it in 2x4 I don't see what your trying to say by saying your TJ disconects power in the T-case, thats how ALL part time 4x4 systems work. why do YJ's, Dodge trucks have the axle disconect and TJ's dont ? EasyXJ 01-24-2002, 08:38 AM I'm with cowmoo, weld it, weld it, weld it. Why spend $200 when you can spend $5. I can't see the strength of the spool over the strength of the carrier being an issue. Easy redruM 01-25-2002, 04:55 AM problem is i dont have a carrier that will work. I have the small gear carrier and i am going to 5.38 gears which require the larger carrier so REAR Welding it will cost me 50$ Spool 200$ Detroit 500S Front ??? a) do i need the CAD axle disconect for rocklock 160$? (i have a detroit in my 30 without hubs and without the CAD) b) what locker ? | |