Cutter

did u move your rear axle back when you cut the fenders? did you move the gas tank ? Fuel Cell ? i am going to cut mine next week and i like the pattern you used how close to lewisville are you ? i would like to see your rig (havnt seen it since you started cutting) = 2 years ago @ JPG ??? redruM ???

Brian

the axle's still in the stock local for now, i
m hanging another axle soon and may move her back some then.
I've got a fuel cell on order from summit, it'll mount on the bed floor beside my optima's.
BTW, right now i've got my rear wheelwells completely wacked out. and i'm working on bobbing the rear off the tub so it ends ahead of the edge of my tires (perfect departure angle) and wack the frame, too. I'll then start welding in cage tubes. The front wheel weels have been opened up and the inner fenderwells are gone...i like a Jeep with and 'air-y' feeling:D

i live over by white rock lake...945 peavy rd

other end of the world from Lewisville

i still would like to see the rig

i got beer if your willin to drive it to Lewisville

GOT :beer: :beer: :beer: :beer: :beer:

Brian

PS if you can stop the order on the gas tank i am going to make my own custom from .125 alum and weld it (new aluminum wire feed welder) could make one for you too (cheaper and exactally what you want...

Brian

redruM...Go to Russ' and check out the TJ he is working on in their. He moved the axle rearward and cut the wheel wells. Made new control arm mounts, arms and relocated the coils at a different angle. I touched this thing with 2 fingers, pushed down and it bounced 4 inches with very little force. It's looking nice.
Cutter...let me know when you do the fuel cell. I raised my tank 2" but don't think it will be enough. SO...I am opting to put a fuel cell in the rear.

have seen russ's and it is nice but there is no tank have a design for the cell i like and will make it myself just looking for other options on cutting out the fenders (all the way back)

Brian