Before Christmas I ordered driveshafts from Jesse. I started installing the shafts on Friday before Christmas eve (in a rush to get things done for the Annual Christmas Eve run here.) Any way, the front did not work as planned. Jesse had already told me he was going on a snow run and leaving at 3:00pm his time, well I catch him about 1:30pm and fill him in on what is wrong. He wants to think on it for a few minutes. Before I call him back I talk to Shaker and he quickly reminds me of something. I am back on the phone with Jesse, its now around 1:45pm(Jesse's time). He is going to have to completely redo the shaft by the time Fedex runs around 2:45pm then ship it Sat. delivery. I don't remember how much beer I drank pacing the shop in the next hour. Jesse calls around 3:00pm, the only way he could get the shaft done was to take his chrome shaft out of the showroom and rework it. He missed Fedex, so he sent someone to catch the Fedex guy at his last stop for the day. I got my shaft Saturday morning and bolted it in, worked Great.

Where is the problem you ask in this novel, the power steering pump took a dump on me Sunday night at 9:30pm, so driving it on the run with no power steering sucked. JUST KIDDING, that had nothing to do with Jesse.

Jesse sorry to scare you, you are THE MAN!! My family and I thank you very much for getting that out the door that afternoon. You could have easly said you didn't have time to get it done, but you didn't. You also sent me your chrome showroom piece. To me that is ABOVE AND BEYOND CUSTOMER SERVICE...
Jesse I have pictures and I will try to send them tomorrow. I am also going to post a few before the end of the week.

Sorry to make everyone read, BUUUTTT not to many people give credit when people do good work/service. Jesse' shafts look and work good so you would be stupid to get your shafts any where else.


Thanks again Jesse.
Andy

;) ;) ;) :)

That's great, but I think you should change the subject of this post. It is very easy for someone to read the subject, and not the whole post, and start badmouthing Jess.

So what you are saying is........you have a chrome driveshaft?? And no pics?? SHEESH.........:D

Yet another great customer service story from Jesse....:D

I guess you've got a point, I don't want any problems for him so it has been changed.....;)

Originally posted by GloNDark
So what you are saying is........you have a chrome driveshaft?? And no pics?? SHEESH.........:D

Yet another great customer service story from Jesse....:D

you got a CHROME DRIVESHAFT?!?!?!? you HAVE to post pics, we promise that nobody will make any smart a$$ed comments:p:flipoff2:

Jesse is the man!!!

Bwahahah! jesse was talking about this situation....and to think I read the title and came into the thread ready to throw punches :D

yes jess is the man! no doubt!

I am going to put pics up tomorrow, I forgot to bring the disk to work today....

Originally posted by Mr. Infinity
I guess you've got a point, I don't want any problems for him so it has been changed.....;)

it still reads about having a probelem with hi angle driveline on the main list of subject threads, just the sub title for your first post has been changed.

I suggest you delete this thread and restart another one with a different title since you didn't change the title the correct way. You changed it in your post, but not for the entire post. Look at the main page again and you will see what I mean.

no don't delete it it was funny as hell. i read the post cause i was gonna come in here and defend jess. i have delt with jess and know for a fact that he bust his ass to take care of every one of his customers. i have yet to hear of anybody not satisfied with his work and i always sent people to him. .....bottom line is he IS the man.

I agree with Camo. Keep it. Too funny. I too came in here fists up and ready to git it AWN. Besides Jesse's great product and business ethics, he's also got a good sense of humor :D

I just talked to "Mr. Infinity" and he's having problem's editing this post. I will be putting his pics on my "site" so you guys can see the "chrome shaft". He will be sending pics tomorrow and I'll get them up tomorrow.

:beer: I'm glad I could help you out "Mr. Infinity"....anytime bud..:beer: :D

JESSE ....YOU ARE THE MAN!!!! Glad I could suggest a few things......YOU ARE THE BEST :usa: :beer: :D

I sure am glad it was you andy hehe- no really glad it all worked out becuase i did bust my a$5 to get it to you 200 fed ex bill for sat delivery and all- hehe Jess :D

I heard chrome ones make it go faster, Jess, how much for a couple of chromies for my heep :D

All this time I could have had a chrome DL:(

Thats two good stories I have read about Jess customer service on this board from now on I know where to order my drive shafts from. Good Job Jess

what can i say... you got me all fired up to come in here fighting....lol Jess is the man!

he the man:D ,well since there are so many newbies on the board and my chances of winning a new shaft or shot to hell.i guess i will have to buy one....

lol JACKASS! I was ready to throw down too :flipoff2:

Jess has gone above and beyond 2X for me now.

Hey why didnt I get <font color=silver><h1>CHROME!?</h1></font>

I have beat the living crap out of my High Angle shafts and they have been working great.

I'll be having a problem with my front shaft from Jess on Saturday. It's going to be too short when I install my Ultimate, Damn :D:D:D:D:D. Already talked to Jess, and he's standing by to hook up both ends this time. Jess is the man :D:D:D.

Here are the pics of "Mr. Infinity" front CHROME 80 DEGREE CV SHAFT!!

here's the link: http://www.geocities.com/shakerbuilt/Customers-Friends.html

Originally posted by Shaker
Here are the pics of "Mr. Infinity" front CHROME 80 DEGREE CV SHAFT!!

here's the link: http://www.geocities.com/shakerbuilt/Customers-Friends.html

scroll to bottom...... :beer: :D :p

Shaker, thanks for posting the pics for me. Also thanks for all the help over the last year, the bastard is almost done....

Dayum!!!:eek: Chrome is nice :flipoff2: I'm sure you would have loved one of those Keith :D

While I am thanking people, I will thank everyone else that helped me over the last year.
Thanks To,
Jess at High Angle Driveline
Mike Curtis at East Hiram 4x4.
Shaker for steering componets and advice, where the hell is my disc brake conversion???jking.
Gerald Roman at Douglas Tune-up and Diagnostics.
Rodney (the guy that did the flames) at Hot Rod Customs.
Russell Bearden at ABC Exhaust.
Jody Thompson one of the wrench turners.
All the guys and two ladies at NAPA.
If I forgot some body, sorry.
Thanks for all the input from the members of POR, even if most of you just crawl over rocks!!!!

cut n turn that dif! brutal driveline angles :eek:

Turning the diff will be done in late spring early summer, I had reconstructive knee surgery last fall and that put me behind getting things done. That is why Jess was such a big help, I wanted to get it to function until I can get it done right..

thanks for postin the pics tim- Jess

Originally posted by onetoncv
thanks for postin the pics tim- Jess

No sweat....check your mail I'm sending you them 2 do what you want-your site/anything else. Take it easy bud.....Tim/Shaker :beer: :beer:

This is GREAT...

You read the title....you do a double take - you read it again. You think " No FAWKIN' WAY", and you glance at the hit count, and think "Some Jerk must be getting pounded for this....it can't be true" And you click ready to leap in and kick ass.....


Only to find another classic of customer service....

Sweet - I say leave the title...it'll get better press.

If you just made the title "High Angle Rocks...." I'd have read it and thought " yea, yea, we know...." and not clicked....but this get's a great story noticed.

well done Jess

Jesse is thinking...."Cool, I finally dumped that aweful Chrome driveshaft!"

Get it Jess...

Dual High Angle and Spares on my Cruiser...Get It!

Originally posted by wngrog
Jesse is thinking...."Cool, I finally dumped that aweful Chrome driveshaft!"
Get it Jess...

Forget about the homophobia someone was complaining about around here ... it's the chromeafobia around here that's worse! :flipoff2:

Jess and I must be from the "old school" of hot rodders when the saying went ...
"If it moves, chrome it!" :smokin:

I too say Jess is the man!!! Ordered an SYE from him, got it, then put it in, measured for my shaft, called him at noon that day, and it was here two days later! Can't beat that! Thanks again Jess.
Scott

Well, it's not chrome anymore. It's more of a Georgia red clay color!!! It should have been on a show queen instead of my old mud truck.;) :smokin:

Originally posted by Mr. Infinity
Well, it's not chrome anymore. It's more of a Georgia red clay color!!! It should have been on a show queen instead of my old mud truck.;) :smokin:

SAY WHAT!!!! :eek: :eek: You better get to polishing!!!!! :p :D :beer:

Bling Bling!
http://www.geocities.com/shakerbuilt/images/Chrome80Deg.jpg

Originally posted by Jaffer


it's the chromeafobia around here that's worse! :flipoff2:

Jess and I must be from the "old school" of hot rodders when the saying went ...
"If it moves, chrome it!" :smokin:

<h1><font color=silver>CHROME</font></h1> Dont get ya home ;)
Dude even my hot rod days chrome was what you did if you couldnt go fast :flipoff2: "if it dont go, chrome it"


69 camaro, 350, 289 power pak heads, muncie m21 rockcrusher etc. well ok CHROME Doug Thorelys
65 corvette, 350, Doug Nash 5spd etc.

great story,,,can't wait to get the point to buy me a 1 ton CV shaft from Jess for the Scrambler, ,,,

the chrome looks great and will glide over the rocks better than a plain 'ol steel one,,,right?

new sales/marketing ploy Jess "the driveshaft that glides over rocks, from High Angel Driveline" :flipoff2:

Ok guess I will chime in, My pair of 1 ton cv's are awesome(no news is good news):D

Rob

Now that's a great story.....
I'm Glad you shared it with us:) ...I like knowing where all the customer service is....I just wish more people were like Jesse!

So Infinity....you said "the front did not work as planned"....so the suspense is killing me. What was actually wrong with the original one he sent ya?

Hey jess you should try giving courses in Customer service to Stockton Wheel (so I've heard):flipoff2: