1350 c/v shafts special pricing for a limited time

[onetoncv]

We have 8 new 1350 c/v 's for a special price they are 2 3/4 tube and have to be used with 1350 at the axle - we will offer these with either .083 tubing for 349.00 or 399.00 with .188 wall - Keep in mind these need our patented flange to work off most applications and we will honor the 15 % off on those usually 99.00 now 75.00 $ - we only can do 8 right now at this price first come first serve - no other discounts apply - Jesse 530-877-2875

[onetoncv]

is this not a good price ? come awne now-JEss

[quaylefarmer]

Very interested.

I need this for a front application with a long slip shaft.

Please advise if the posted pricing still applies.

Thanks for your help!!!

[rockmup]

Jess, I'll call you on Monday. So any chance you'll knock of 25 off the .188 wall shaft since I just paid full price for the flange ? Gotta ask.


How much more for the long slip ?

Thanks

[onetoncv]

Very interested.

I need this for a front application with a long slip shaft.

Please advise if the posted pricing still applies.

Thanks for your help!!!
add 60$ for a 12 " slip with boot and heat treated splines- JEsse 530-877-2875

[onetoncv]

Jess, I'll call you on Monday. So any chance you'll knock of 25 off the .188 wall shaft since I just paid full price for the flange ? Gotta ask.


How much more for the long slip ?

Thanks
I'll meet ya in the middle - 12 $ off -this is not a fish market these are good prices - 60$ more for a long travel - LEt me know soon it wil not last forever- Jess

[rockmup]

ttt



And thanks for the help today. See ya soon.

[KarmirToy]

hey Jess, I dont want to look stupid since its been a while, but do you have any more of these left?

[onetoncv]

hey Jess, I dont want to look stupid since its been a while, but do you have any more of these left?
i should be able to do a few more - give me a ring-Jesse 530-877-2875

[angeley]

Jess I'll call you on this one. Bought a flange and ebrake from you about 2.5 months ago. I'm getting very close now to getting things back together (and some measurements). I want the .188 wall, 12" slip, boot and treated slines. but is 2.75" your standard diameter shaft?

Gracias :D

[angeley]

Woops forgot to add... that I need a D60 1350 yoke. Can you send pm or respond with a qoute - front and rear cv's and front yoke. Also... Do you have a Ubolt 1350 14 bolt yoke (or know where I can get one?). Thanks again.

[onetoncv]

on that one .188 wall we can do it with this special - the 2 3/4 is not the most common i just got a few new assemblies in and want to move these -Jess