Dana 44 60 14 Bolt Two Piece Formed & Welded Diff Covers

[Greatlakeoffroad]

Now available countersunk bolt rings $15 extra per cover. These top of the line two piece covers run a total of $110 with recessed bolt holes. We just ran a batch of our diff covers for a buddies shop down in Oakridge,TN. So we have a few extra parts laying around and we decided to let them go to you guys at a good price. Our covers are made from two pieces (not including the machined fill plug insert) The bolt ring is laser cut from A36 grade 1/2" thick steel. The covers are formed from a single piece of 1/4" on a 250 ton CNC brake. The covers are then fit by hand and mig welded. We do not sand our covers. We offer a no BS no fine print warranty which I stand behind but have never used. This warranty states if you break this under real use I will replace the cover. We use a counter bore bit to make sure the area around holes are free from any obstructions, weld or otherwise. It may take up to a week to ship your cover. As I am currently welding all of these in house myself, this is due to the fact we had an issue with an outsourced welder who was finishing these for us and shipping them with quality I did not feel was up to par. We tried outsourcing to keep overhead low and turn around time minimal. It didn't work so I am doing all fabrication at this point. If you have any questions feel free to ask. The top pic is us trying to demolish one of these with no success. The next pic is a 14 bolt on the left and the D-60 on the right. The link at the bottom of the page is to see this pic up close to view quality. These pics were taken before final finishing. We are also currently working on a set of covers made all of 1/2" material and robotically mig welded. These should be out in the next month or so. Please PM me for shipping costs. Thanks Shawn
http://i13.ebayimg.com/03/i/02/7a/bc/79_1.JPG
http://i8.ebayimg.com/02/i/02/39/cd/45_1_b.JPG
http://i4.ebayimg.com/02/i/02/39/a1/1c_1.JPG
http://www.bralinlaser.com/uploads/diff%20cover

[Greatlakeoffroad]

Sorry, guys these are $95 + shipping. Thanks Shawn

[TPIJeep]

You have a PM, I like them!

[Alaska ZJ]

damn you! I just sent you a check....lol. I actually think I am gonna wait for the 1/2 ones...I would like to use it for suspension stuff.

Can you put a tap on the top of it like the Poison spyder rock ring?

[Greatlakeoffroad]

I have my own opinion on those tabs, I personally never liked the idea because it sticks up their with no support. If we did something I would like to give the option of selling a weld on kit with at least two tabs that could be made very strong especially for using as a functional part of a working suspension. I'm a great one for overkill, do it once right and you have no worries. Let me know your opinions on this. Thanks Shawn
damn you! I just sent you a check....lol. I actually think I am gonna wait for the 1/2 ones...I would like to use it for suspension stuff.

Can you put a tap on the top of it like the Poison spyder rock ring?

[Greatlakeoffroad]

PM'ed everyone. Thanks

[5.9ctd_fj40]

btt looks beefy you got me thinkin!! do you have any pics of installed ones?

[TRed]

I do. :D http://www.crawltech.com/albums/SAS-Frontier/Axle_installed_002.sized.jpg

[Greatlakeoffroad]

Thanks for the help TRED
I do. :D http://www.crawltech.com/albums/SAS-Frontier/Axle_installed_002.sized.jpg

[Alaska ZJ]

Check is sent. BTT for you.

[Greatlakeoffroad]

Sounds good we'll jump on it. Shawn
Check is sent. BTT for you.

[AlaskaToy]

Please PM price and shipping to 99702 for a 14bolt and d60 covers. Thanks.

[Big96zr2]

do you have any 60s still? BTW your disc brake brackets are NICE! thanks

Brian

[badazcj1]

Wanna PM me about dana 60 disc brake brackets? :P

[MOGXJ44]

Nice link. Sorry, I don't read in code like The Matrix.
Travis
BTW, Let's see some more attempts to kill these. How 'bout running over it with the metal tracks. ;) Destroyin' things is cool.

[Alaska ZJ]

I already bought 2 of these suckers but if Shawn sends me another one I will Wrap it in Det Cord and then shoot it with the Ma Duece.

I have a buddy who is into high speed photography and has a high speed camera to take some boomin (litterally) pics with.

[Greatlakeoffroad]

New $15 option recessed machined bolt holes please PM me for a shipping quote. As everyone has asked for. Thanks Shawn

[jekbrown]

you da man Shawn, I already run one of your ff14b covers and it kicks azz. PM me a quote for a D60 front cover with counter-sunk holes shipped to 98686. Not in a hurry, slow/cheap shipping is fine with me. ;) Thanks!

j

[Greatlakeoffroad]

I'll PM ya just thought I'd let everyone know were coming out with a new cover series called the Dominator. Basically its everything anyone could want in a diff cover. Top notch quality, recessed holes, 3 piece construction. Best of all is the price at $130 its still the toughest cover out here with the best price and features. The third piece of construction is a piece of 1/2 inch plate formed in a u shape and welded to the face of the 1/4 inch cover for the ultimate protection. I will post picks shortly. Oh, and when we post the pics you guys can drool, we have plenty of shop towels to wipe up the mess. Thanks Shawn
you da man Shawn, I already run one of your ff14b covers and it kicks azz. PM me a quote for a D60 front cover with counter-sunk holes shipped to 98686. Not in a hurry, slow/cheap shipping is fine with me. ;) Thanks!

j

[Greatlakeoffroad]

Covers are ready and pics will be posted in the next day or so. Thanks Shawn

[Lt1Cj7]

Please PM me a total price with shipping to 30024, for a 14 Bolt cover.
Thanks

[Judd]

Can I get a price for one shipped to 48161, HP D60, thanks, Judd

[btolenti]

price for a 14bff with countersunk holes to Vacaville, CA 95687.

Thanks!

[Greatlakeoffroad]

PM'ed you, Thanks Shawn
Please PM me a total price with shipping to 30024, for a 14 Bolt cover.
Thanks

[Greatlakeoffroad]

PM'ed you, Thanks Shawn
Can I get a price for one shipped to 48161, HP D60, thanks, Judd

[Greatlakeoffroad]

PM'ed you, Thanks Shawn
price for a 14bff with countersunk holes to Vacaville, CA 95687.

Thanks!

[LouisianaZJ]

delete

[Greatlakeoffroad]

PM'ed all, Thanks Shawn

[LouisianaZJ]

PMed

[jlake1]

Just wanted to comment and say that the "bulletproof" version is one of the beefiest things I have seen that passes for a "cover". Excellent work.....

Jay

[Rebel Racers]

How do I purchase covers from you? I need a dana 60 and a corp 14 bolt . My neighbor has a set of your covers and loves em.. My vehicle is a 77 GMC crew cab 1 ton. Thanks
Steve

[Greatlakeoffroad]

Appreciate the comments all I can say is we were striving for bomb proof with that design. Thanks Shawn

Just wanted to comment and say that the "bulletproof" version is one of the beefiest things I have seen that passes for a "cover". Excellent work.....

Jay

[Greatlakeoffroad]

PM me a zip code and which style you want and we'll shoot you a quote. Thanks Shawn
How do I purchase covers from you? I need a dana 60 and a corp 14 bolt . My neighbor has a set of your covers and loves em.. My vehicle is a 77 GMC crew cab 1 ton. Thanks
Steve

[LouisianaZJ]

i just got my cover and i snapped a few pictures of how they look for you guys
this is the basic 1/4" cover, D44
ill let the pics speak for themselves

thumbnails
http://img146.exs.cx/img146/1186/oil_1818.th.jpg (http://img146.exs.cx/my.php?loc=img146&image=oil_1818.jpg)

1/2" ring
http://img146.exs.cx/img146/3943/oil_1817.th.jpg (http://img146.exs.cx/my.php?loc=img146&image=oil_1817.jpg)

inside
http://img146.exs.cx/img146/3217/oil_1816.th.jpg (http://img146.exs.cx/my.php?loc=img146&image=oil_1816.jpg)

thanks for the cover Shawn

[BlueJeep]

Price for the counter-sink one (14 bolt) shipped to 50111 please. Thank you.

[sknydwn]

Shawn I emailed you a couple of times, shoot me a pm with a shipping quote for the standard 2 piece 60 cover shipped to 37663
thanks
bcoates52@hotmail.com

[Bushwhacker]

Price on a D60 cover to 62035.

[egon]

Shawn, sent you a PM.

--Matt

[Bushwhacker]

Any pics of a D60 beefed up version?

[Greatlakeoffroad]

Current pricing is $100 for the base model cover. If interested please e-mail us Shawn4x4@greatlakeoffroad.com as we only check this site maybe once a week and sell thru various websites we are trying to keep everything for one point of contact. Thanks Shawn

[Greatlakeoffroad]

ttt

[geberhard]

Shawn, 14 bolt holes sunk to CA 94583

THX

[NorthWestFab]

Workin' FINE

http://www.pdcracing.com/truck/dualcase/truck005.jpg

....Now to find time to finish the rest...

[Judd]

Hey Shawn, I got some stuff I need to order, I've tried calling and sending emails, give me a call 517-819-4973 thanks, Judd

[Eagle-Mark]

Very nice! Just e-mailed you.

[Greatlakeoffroad]

Workin it up. Thanks Shawn
Very nice! Just e-mailed you.

[GREENEJEEP]

I.........eeeeee.............like it!

[k5blazerkeith]

14 bolt with countersunk holes to 92630? Also without the sunk holes? Thank you...

[Sully]

Could you PM me a price for a D44 cover with countersunk holes and shipping to 85281? Thanks!

[Greatlakeoffroad]

replied to your e-mail keith the counterbored holes are an extra $15 per unit. Thanks Shawn

14 bolt with countersunk holes to 92630? Also without the sunk holes? Thank you...

[Greatlakeoffroad]

E-mailed you Sully, Thanks Shawn

Could you PM me a price for a D44 cover with countersunk holes and shipping to 85281? Thanks!

[Wolverine]

do you still have any dana 60 cover with the countersunks hole? IF so how much to 95628.

[RSQJEEP]

Do you have any dana 44 covers w/recessed bolt heads left? If so, can you pls pm me shipped to 21638?

Thanks!

[Hiapo]

I need a D44 cover shipped to 79601.

[toyzilla]

Price with shipping to 95610 for the Dominator D60 cover.
Thanks!

[Ben Holloway]

need a price for a d-60 cover, you guys have these ready to ship out this week??? oh and my zip is 97701

thanks
Ben

[eb76adam]

Need a regular D44 cover shipped to 30189 asap - thanks!

[Derek K10]

can i get a price on a 60 and a 14b cover shipped to business addy 01020

[militarYota]

60/14 to 98321

[Greatlakeoffroad]

E-mailed you. Thanks Shawn

do you still have any dana 60 cover with the countersunks hole? IF so how much to 95628.

[Greatlakeoffroad]

E-mailed you. Thanks Shawn

Do you have any dana 44 covers w/recessed bolt heads left? If so, can you pls pm me shipped to 21638?

Thanks!

[Greatlakeoffroad]

E-mailed you. Thanks Shawn
I need a D44 cover shipped to 79601.

[Greatlakeoffroad]

E-mailed you. Thanks Shawn

Price with shipping to 95610 for the Dominator D60 cover.
Thanks!

[Greatlakeoffroad]

E-mailed you. Thanks Shawn
need a price for a d-60 cover, you guys have these ready to ship out this week??? oh and my zip is 97701

thanks
Ben

[Greatlakeoffroad]

E-mailed you. Thanks Shawn

Need a regular D44 cover shipped to 30189 asap - thanks!

[Greatlakeoffroad]

E-mailed you. Thanks Shawn

can i get a price on a 60 and a 14b cover shipped to business addy 01020

[Greatlakeoffroad]

E-mailed you. Thanks Shawn

60/14 to 98321

[bigassedredjeep]

Shawn, where's my cover??? :confused: thanks for f*cking up my weekend :flipoff2:

later
brandon

[Greatlakeoffroad]

If your Farley it looks as if UPS f*cked up your weekend :flipoff2: Not I says I we shipped day after payment arrived, take a look see for yourself 1Z 1F1 3T2 03 9764 691 5 its been held up in the backwards state of NC of all places :rolleyes: . Thanks Shawn
Shawn, where's my cover??? :confused: thanks for f*cking up my weekend :flipoff2:

later
brandon

[bent70]

Price for 60/14b to 94121

[Greatlakeoffroad]

E-mailed you. Thanks Shawn
Price for 60/14b to 94121

[bigblacktj]

Price hp 44 shiped to 42071

[Greatlakeoffroad]

E-mailed you. Thanks Shawn

Price hp 44 shiped to 42071

[maine_gunner]

can i get a price for 2 shipped to 04103 dana 44`s

[Greatlakeoffroad]

E-mailed you. Thanks Shawn

can i get a price for 2 shipped to 04103 dana 44`s

[Greatlakeoffroad]

bump

[Greatlakeoffroad]

bump

[Greatlakeoffroad]

bump

[Greatlakeoffroad]

bump

[SJMike]

Can I get a price for a 60 shipped to 30188. Thanks

[Greatlakeoffroad]

You have an e-mail. Let me know. Thanks Shawn


Can I get a price for a 60 shipped to 30188. Thanks

[RG]

Shawn,
Have you given any more thought to a diff cover with the mount tab at the top? Given the 1/2" ring the beef is obviously there.

[Greatlakeoffroad]

We could do it but I prefer to build things different from everyone else ie: Poison Spider does this I believe? I have not sen this much interest in something like this. If there is by all means lets hear what everyone has to say and we can go from there. Thanks Shawn


Shawn,
Have you given any more thought to a diff cover with the mount tab at the top? Given the 1/2" ring the beef is obviously there.

[Greatlakeoffroad]

bump

[XPLRN]

You have a tuff looking product!! Price for a 14-Bolt shipped to 85029?? Thanks!

'XPLRN'

[SJMike]

Shawn, I emailed you but haven't heard back. Can you send me a tracking number for the diff cover? I am was hoping it would be in before Saturday so I could show it to some friends at our club meeting. thanks,

[Hard Rock Holley]

Price quote for a hp44 / 60 covers with recessed holes to zip 35213. Thanks

[Kaiser5]

Price for a 14bolt cover shipped to 60540.
Thanks, Mike

[RSQJEEP]

Sent ya a paypal for the D44 Diff cover w/ recessed bolt holes....thanks for the great customer service!!!!!!

[Greatlakeoffroad]

Mike what was the shipping addy name? I will pull that info off of e-bay for you. Thanks Shawn

Shawn, I emailed you but haven't heard back. Can you send me a tracking number for the diff cover? I am was hoping it would be in before Saturday so I could show it to some friends at our club meeting. thanks,

[Greatlakeoffroad]

$247.25 to your door. Let me know, you can e-mail me at the below addy. Thanks Shawn

Price quote for a hp44 / 60 covers with recessed holes to zip 35213. Thanks

[Greatlakeoffroad]

You have an e-mail. Thanks Shawn



Price for a 14bolt cover shipped to 60540.
Thanks, Mike

[Greatlakeoffroad]

Thanks for the business. Shawn

Sent ya a paypal for the D44 Diff cover w/ recessed bolt holes....thanks for the great customer service!!!!!!

[AtTiLiA]

d60 14b cover too 84092

and do you have any 14b disc brake conversion brackets still and how much shipped for those too.

[SJMike]

Got it right after I posted here Shawn. Thanks for the quick turn around!

[Greatlakeoffroad]

You have an e-mail. Thanks Shawn

You have a tuff looking product!! Price for a 14-Bolt shipped to 85029?? Thanks!

'XPLRN'

[Greatlakeoffroad]

You have an e-mail. Thanks Shawn



d60 14b cover too 84092

and do you have any 14b disc brake conversion brackets still and how much shipped for those too.

[Greatlakeoffroad]

No problem, Thanks for the business, Shawn


Got it right after I posted here Shawn. Thanks for the quick turn around!

[Greatlakeoffroad]

bump

[Greatlakeoffroad]

We also now accept credit cards for payment however to keep prices low for everyone there will be a $10 minimum or 10% (whichever is more) convenience fee added to the total purchase amount. Thanks Shawn

[Greatlakeoffroad]

bump

[korda]

Can you PM/email me a price for a 60 cover with recessed holes shipped to 55404?

Thanks.

[Greatlakeoffroad]

E-mailed you. Thanks Shawn


Can you PM/email me a price for a 60 cover with recessed holes shipped to 55404?

Thanks.

[The Von]

Same prices on these still? Looking for a 14 bolt cover with all the options. Total cost shipped to 92109.

[Greatlakeoffroad]

We have a special going on in the Misc section of the vendors on PBB it is any cover $110 to your door options are $15 extra per option per cover. So it would be $140 to your door. Let me know. Thanks Shawn



Same prices on these still? Looking for a 14 bolt cover with all the options. Total cost shipped to 92109.

[sceep]

quote for 14 bolt and dana 60 shipped to 87059 please. :D

with and without countersunk holes.

nate

[Greatlakeoffroad]

You have an e-mail. Thanks Shawn

quote for 14 bolt and dana 60 shipped to 87059 please. :D

with and without countersunk holes.

nate

[guinea13]

Quote for 14 bolt and dana 60 with countersunk holes shipped to 29680 please.

Thanks.

[LMC]

quote for dana 60 countersunk holes shipped to 79705

[Greatlakeoffroad]

You have an e-mail let me know. Thanks Shawn

Quote for 14 bolt and dana 60 with countersunk holes shipped to 29680 please.

Thanks.

[Greatlakeoffroad]

You have a quote. Thanks Shawn


quote for dana 60 countersunk holes shipped to 79705

[88flexj]

I would like a quote for the original 44 cover, and one of your Ford 9'' pinion guards shipped to 93907. Thanks. Email is thmpsn5@comcast.net

[Greatlakeoffroad]

E-mailed you. Thanks Shawn

I would like a quote for the original 44 cover, and one of your Ford 9'' pinion guards shipped to 93907. Thanks. Email is thmpsn5@comcast.net

[msquared]

Can I get a price on a D44 w/countersink shipped to 98281?

Thanks.

[Greatlakeoffroad]

Our going special on PBB in the MISC vendors section ios $125 to your door lower 48 Thanks Shawn


Can I get a price on a D44 w/countersink shipped to 98281?

Thanks.