: warn OD for model 18


kyrel69
08-11-2004, 03:47 PM
I am saleing a warn OD for a model 18 transfer case. I have the shifter for it too. Will post pic later this week

Asking $350 o.b.o +shipping

mikecj5cj8
08-11-2004, 09:14 PM
Is it 26 or 29 tooth overdrive?

kyrel69
08-11-2004, 10:04 PM
Is it 26 or 29 tooth overdrive?


well I do not know ,,, did not know there were 2 different ones. What part do I need to count the tooth on and I will.

Creepy196
08-12-2004, 12:04 AM
What part do I need to count the tooth on

The input gear. It bolts onto the output shaft of the transmission. While yer lookin', count the splines on the inside of this gear. It should be six or ten. Inquiring minds will want to know... What tranny was this bolted to? Do you still have said tranny?

saprobe
08-12-2004, 04:43 AM
the OD unit is a 29 tooth,6 spline.

it came off of a t90 tranny that was in a 60-something cj,behind a SBC,so not sure if the tranny and transfer case were the original items or not.i believe that they were,as this jeep had been in storage for 15+ years,and the chevy conversion was done long enuff ago it used a generator instead of an alternator ;)

also,there is no input gear to speak of,like on normal cases. the 29 teeth are on the outside of the OD. the unit itself is the input gear. there is a special nut and washer that hold the unit onto the tranny tailshaft.

the original tranny is loooooong gone,but there was nothing special about it. the OD will bolt to any 55-71 spicer 18,and any 6 spline tranny that the spicer 18 will bolt to.

further questions? :)

kyrel69
08-12-2004, 05:38 AM
the OD unit is a 29 tooth,6 spline.

it came off of a t90 tranny that was in a 60-something cj,behind a SBC,so not sure if the tranny and transfer case were the original items or not.i believe that they were,as this jeep had been in storage for 15+ years,and the chevy conversion was done long enuff ago it used a generator instead of an alternator ;)

also,there is no input gear to speak of,like on normal cases. the 29 teeth are on the outside of the OD. the unit itself is the input gear. there is a special nut and washer that hold the unit onto the tranny tailshaft.

the original tranny is loooooong gone,but there was nothing special about it. the OD will bolt to any 55-71 spicer 18,and any 6 spline tranny that the spicer 18 will bolt to.

further questions? :)


thanks

he is right. we got that jeep together.

Grendel
08-12-2004, 03:59 PM
Shipped price to 95623 please.

kyrel69
08-12-2004, 04:35 PM
pmed you with prices

Domenic
08-12-2004, 06:17 PM
I have a buyer if you still have it..Ship to 95678 :)

kyrel69
08-12-2004, 06:34 PM
I have a buyer if you still have it..Ship to 95678 :)


ok I sent Grendel some shipping infor,,, so if he does not want it then I will let you know first thing then

Domenic
08-12-2004, 06:39 PM
ok I sent Grendel some shipping infor,,, so if he does not want it then I will let you know first thing then

Thanks :smokin:

kyrel69
08-24-2004, 05:25 AM
btt