metal buildings

[Poley]

looking for the best place to get one, looking for 25Wx40Lx10H. oh ya and affordable too

[camo]

i bought mine from www.steelbuilding.com

after much reserch and debate i went with them and ended up with a great building at a fair price. you will not be disapointed

[fj40guy]

Take a look here: Building Suppliers (http://www.pirate4x4.com/forum/showthread.php?t=270056)

Also read through Camo's post about the height. Originally I throught of 10' high walls, but 14' doesn't increase the price that much, and opens up a lot more options/storage. Details here: 30' x 50' shop layout (http://www.pirate4x4.com/forum/showthread.php?t=270824)

Tom :usa:

[threadkiller]

The most affordable way I have found is to use rough cut sawmill lumber. I recently built a 30x40 with 10 foot walls and 6 inch concrete floor for under $10,000.

The concrete was the most expensive part, and I got the sheetmetal at cost.

[fj40guy]

The most affordable way I have found is to use rough cut sawmill lumber. I recently built a 30x40 with 10 foot walls and 6 inch concrete floor for under $10,000.

The concrete was the most expensive part, and I got the sheetmetal at cost.


POST UP PICS! :)

You can also send them to me... and I'll post for ya. :)

Tom :usa:

[threadkiller]

I'll see what I can do.

[Poley]

thanks good links.

[Poley]

need pics!! damn it! must have pics.. and plans for a 30wx40l building..help a brother out.. :smokin: