Does anybody know the proper replacement bulb number that is used in the marker lights in a FJ60/62 bullbar? The ones in mine look to be the originals, but I can't read the number that is stamped into them. They draw too much current and keep popping my 15A Tail fuse, so I wanna try something that is lower wattage.

Thanks.

Does anybody know the proper replacement bulb number that is used in the marker lights in a FJ60/62 bullbar? The ones in mine look to be the originals, but I can't read the number that is stamped into them. They draw too much current and keep popping my 15A Tail fuse, so I wanna try something that is lower wattage.

Thanks.
do you have them as flasher or parking lights ??? there set up for flashers

I tried them on the turn signal circuit, I thought it looked dumb having 2 sets of signals on the front. I like the marker light better, but I think it needs a lower wattage bulb. Each bulb draws about 2.5 amps, which is about 30 watts.

and they will melt the lens.

If no luck Ken I will pull the light out of the 62 tonight, its only a few months old.

I tried them on the turn signal circuit, I thought it looked dumb having 2 sets of signals on the front. I like the marker light better, but I think it needs a lower wattage bulb. Each bulb draws about 2.5 amps, which is about 30 watts.

Mine have been hooked up as markers for 2 years now, no distortion of the lenses so far. Just got off the phone witht TR at ARB, he also confirmed that they are supposed to be turn signal only, but he had no clue on the bulb number suppied with the bar.

Off to NAPA I go...