|
: th400??? High5 01-26-2002, 09:41 AM ok i am auto tranny ignorant and i have a question. i just got a th400 that i put in my jeep and it has one wire running to the drivers side and i don't know what it does. what is it and what do i need to hook it to? thanks High5 01-26-2002, 10:50 AM ok i have found out that it is for a passing gear. now question 2: i have a 99 vortec 350 so how would i wire a switch to make it work? rodzzilla 01-26-2002, 10:50 AM It is for the kickdown. You can get a kit from B&M or leave it off. rodzzilla 01-26-2002, 10:58 AM The kickdown kit should still work with the Vortec. You might have to fab a bracket to hold the switch, or use a bracket for a carbed kickdown. The one from the 4L60 TV cable might work. High5 01-26-2002, 10:59 AM Originally posted by rodzzilla It is for the kickdown. You can get a kit from B&M or leave it off. my jeep is primarily and off-road rig so would i need it? i found the kit you are talking about in summit. rodzzilla 01-26-2002, 11:06 AM It would be handy to have. That way you wont have to manually kick down to get passing gear. If it isn't hooked up, it won't cause any damage. High5 01-26-2002, 06:42 PM thanks for the reply's:D Chief yelling alot 01-28-2002, 12:01 AM My bro and his GMC van has it on the gas pedel bracket a budy has a 400 in his IH pickup with a caddy 425 and it's switch was on the carb oh and congrats you just got your self one of the strogest autos ever built High5 01-28-2002, 08:16 AM Originally posted by Chief Yelling Alot My bro and his GMC van has it on the gas pedel bracket a budy has a 400 in his IH pickup with a caddy 425 and it's switch was on the carb oh and congrats you just got your self one of the strogest autos ever built strong is what i have been striving for. 1ton axles, 350 from a 99 1ton (not that it is any better than a 1/2ton 350 but hey it's from a 1ton!), tranny is from a 1ton, and if my atlas would ever get here i'll be set! :D | |