BenTK1120
09-06-2004, 11:46 AM
Cleaning out the shed to make room for more parts :D
Chevy 10-bolt housing from 82 1/2-ton 2wd. Includes shafts, carrier, R&P and spider gears. No cover. Ring, pinion, and spider gears have some chipped teeth.
- $25
Other stuff kickin' around:
700R4 from 82 Chevy 1/2-ton 2wd. Rebuilt under 8,000 miles ago. Has brand spankin' new TCI aluminum oil pan w/ drain plug (+2qt. capacity w/ cooling fins), paid $110.99 for it, never been run on a vehicle. Also have brand new dipstick/tube and harness. Complete tranny, works great, ready to put in.
- $350 ($525 with torque converter below)
TCI 11" Breakaway non-lockup torque converter for 81-84 700R4s and all TH200c/7004R 27-spline, 1.703 in. crank pilot trannies. From summit: "This TCI Breakaway torque converter will give you about 1,000 more rpm stall speed than stock, so you'll launch and accelerate faster. TCI remanufactures it to last with furnace-brazed fins, needle bearings, and a flame-hardened hub--the same qualities they gave their street/strip converters."
http://store.summitracing.com/defau...FG&N=120+400252
Check it out for yourself... Paid $289.99 new, never used.
- $200
Drum brakes from same truck. Work fine, complete.
- $40 obo
3 steering columns, should fit any 73-88 GM trucks. Lots of various parts, couple brand new ignition cylinders w/ keys and i think i have 1 or 2 old cylinders possibly with keys.
- $30 ea
Door: driver side, red, fits 73-88(?) GM. From 79(?) 1/2ton chevy. no glass or dents.
- $50
Fender: driver side, grey, fits 73-88(?) GM. Dunno what it came from, got it from a guy who didn't remember what it came off. No dents, one pinch weld slightly bent, easy fix.
- $30
Also have a bunch of parts from 2001 CBR1100xx Blackbird. Stock rims(complete w/ rotors, sprocket, etc.), tires, aftermarket pipes, headlight and assembly, side mirrors, complete nissin brakes (front and rear), instrument panel, rear turn signals, etc. Let me know what you need.... :)
Will trade for parts... I currently need front/rear toyota axles w/ 5.29s, locker in rear would be nice, toyota 5-speed tranny, toyota t-case (preferably with 4:1), marlin dual case, 88 & up 22RE, nice bucket seats (Toyota SR5?), Warn winch, CB.... yeah, basically lots of stuff.
PM or call my cell 707-843-1227. Ben
Chevy 10-bolt housing from 82 1/2-ton 2wd. Includes shafts, carrier, R&P and spider gears. No cover. Ring, pinion, and spider gears have some chipped teeth.
- $25
Other stuff kickin' around:
700R4 from 82 Chevy 1/2-ton 2wd. Rebuilt under 8,000 miles ago. Has brand spankin' new TCI aluminum oil pan w/ drain plug (+2qt. capacity w/ cooling fins), paid $110.99 for it, never been run on a vehicle. Also have brand new dipstick/tube and harness. Complete tranny, works great, ready to put in.
- $350 ($525 with torque converter below)
TCI 11" Breakaway non-lockup torque converter for 81-84 700R4s and all TH200c/7004R 27-spline, 1.703 in. crank pilot trannies. From summit: "This TCI Breakaway torque converter will give you about 1,000 more rpm stall speed than stock, so you'll launch and accelerate faster. TCI remanufactures it to last with furnace-brazed fins, needle bearings, and a flame-hardened hub--the same qualities they gave their street/strip converters."
http://store.summitracing.com/defau...FG&N=120+400252
Check it out for yourself... Paid $289.99 new, never used.
- $200
Drum brakes from same truck. Work fine, complete.
- $40 obo
3 steering columns, should fit any 73-88 GM trucks. Lots of various parts, couple brand new ignition cylinders w/ keys and i think i have 1 or 2 old cylinders possibly with keys.
- $30 ea
Door: driver side, red, fits 73-88(?) GM. From 79(?) 1/2ton chevy. no glass or dents.
- $50
Fender: driver side, grey, fits 73-88(?) GM. Dunno what it came from, got it from a guy who didn't remember what it came off. No dents, one pinch weld slightly bent, easy fix.
- $30
Also have a bunch of parts from 2001 CBR1100xx Blackbird. Stock rims(complete w/ rotors, sprocket, etc.), tires, aftermarket pipes, headlight and assembly, side mirrors, complete nissin brakes (front and rear), instrument panel, rear turn signals, etc. Let me know what you need.... :)
Will trade for parts... I currently need front/rear toyota axles w/ 5.29s, locker in rear would be nice, toyota 5-speed tranny, toyota t-case (preferably with 4:1), marlin dual case, 88 & up 22RE, nice bucket seats (Toyota SR5?), Warn winch, CB.... yeah, basically lots of stuff.
PM or call my cell 707-843-1227. Ben