: Want to be a big dog?


mulescj8
09-09-2004, 07:07 PM
Ok guys this is going to be long and for a limited time before i change my freakin mind................so here goes:

1-One rear Dynatrac dana 60 axle,detriot locker,5:13 gears,rear disc brakes,35 spline axles,1 1/2" shafts with stock CJ bolt pattern(5 0n 5 1/2) bolt pattern,metal fussion diff gaurds.($120.00 New).........set up for SOA and will bolt into any scrambler or CJ from 81 to 86,inclundes rear CV (long travel) driveshaft 1310 U-Joints built by Tom Woods over $250.00 new.Includes brake lines

2-One front Dynatrac dana 60 axle,detriot locker,5:13 gears,disc brakes,35 spline inner shafts and 35 spline stub shafts,1 1/2" shafts inner and outers,metal fussion diff gaurd($120.00 new)........Set up for SOA and will bolt into any CJ from 81 to 86,inclundes front long travel (11") driveshaft over $275.00 new.Stock 5 on 5 1/2 bolt pattern.Includes brake lines.Both axles are built to widetrack specs and have 1 1/4" Wheel spacers with them.

3-Dana 300 transfercase set up with 4to1 gears and twinstick shifters(gears are over $800.00 alone,not including labor,twin sticks are another $120.00 alone)

4-NV4500 tranny(over $2500.00 new with adapter) with shifter

5-258 motor(9000 miles on the Jasper built motor) with clifford intake and clifford header (header and intake alone are over $500.00 new.........with Howell TBI injection complete with manual(this is about $1100.00 new) not Calif legal.

6-3 core radiator and AGR steering box(no pump...I toasted it.Power steering lines included.

If you had these axles built today they would run $10,000 alone........I just priced a set for a friend.........So here is the deal everything is my Jeep right now and running,motor,transmission,and transfercase will be pulled as a unit..............so just bolt all this under your junk and throw on some 35" to 40" tires and go abuse it as much as you want.What does it cost to play with the "BIG DOGS" If you jump on this combo now it will save you "TONS" of money..........the whole combo and package can be yours for $11,500.00........this a proven system and it works...........been on the toughest trails in the midwest and east and has survied without breakage.......this price does not include the years or R&D i have put into this
system.So jump on it now before i change my mind-JC- I will not Ship will have to be picked up in east Tennesse:flipoff2:

deadandcompany
09-09-2004, 07:32 PM
You smoke good sh!t man! And you left out with type of axles-44's,60's ??
Good luck.

Arya Ebrahimi
09-09-2004, 07:35 PM
Judging by the fact that they're 35 spline, I'd wager that they're 60s.

mulescj8
09-09-2004, 08:01 PM
You smoke good sh!t man! And you left out with type of axles-44's,60's ??
Good luck.

You'd think by the fact that there 1 1/2" shafts and 35 spline that you would know that they are Dana 60s............and yes i smoke the very best cuts of Meat.............JC :flipoff2: :flipoff2:

sknydwn
09-09-2004, 08:10 PM
where in east tn. are you? I'm in kingsport and might wanna swing by and take a look, also will you seperate any of the parts? :D

Arya Ebrahimi
09-09-2004, 08:41 PM
the question remains though, are they regular dynatrac 60s or prorock 60s?

mulescj8
09-09-2004, 09:39 PM
They are not Prorocks................

Greg Davis
09-10-2004, 08:35 AM
How much for just the axle assemblies, and what is the WMS to WMS measurement? I'm in Charlotte so I could pick 'em up.

mulescj8
09-10-2004, 02:37 PM
Greg there 56" wms to wms and i also have a set of 1 1/4" wheel spacers with them that i have run for three years without a problem so that brings out to around 58 1/2" WMS to WMS,..I would really perfer to sell everything together but if i decide to part it out then i'll post and let everyone know-JC

Troopslinger
09-10-2004, 04:20 PM
what are the prices? for dana 300? and axles?

mulescj8
09-10-2004, 04:51 PM
PLEASE READ THE ABOVE!...............Where i said i want to sell all this at one time and not part it out and if i decide to part it all out i will let everyone know-I would perfer to sell this as a package.........really don't want the headache of parting all this out-JC

GubNi
09-11-2004, 05:11 AM
I'm in JC and have a friend that iwas planning on ordering this kit. Please call me 737-0265.....Shawn

RockwelledToyota
09-11-2004, 07:02 AM
Thats good sh@t!

mulescj8
10-16-2004, 11:19 PM
Everything is sold but the motor,thanks to all that looked and asked about stuff- :D

Pinerog
10-17-2004, 11:35 PM
How much for the motor?