|
91JeepYJ 01-28-2002, 05:49 PM What do u guys think... will that be enough. I have a 4in SkyJacker Suspension lift and a 3in body. Right now I am running 33's with plenty of room for a larger tire, but am in the market for new meats and am considering getting the 36 TSL Radials. Will I have a descent amount of flex with 36's? or should I just get 35's? Any advice or pics would be appreciated. Thanx in advance... Alex dxwwn 01-28-2002, 06:16 PM a friend of mine runs a RE 4.5inch with a 3inch body lift and 36's with plenty of room to flex, you should be fine RockyXJ 01-28-2002, 10:27 PM 1st post, uh oh, aw well, i'm still a newbie can't beak off, but i can give a :flipoff2: :flipoff2: . Anyways, i hope you've swapped in new axles or plan on it, as well as new gears and all that. Remember the sawzall is your friend. Jordan aaronlosey 01-29-2002, 12:35 PM trim the fenders a bit and add tj flares and they will fit fine. trim the fenders alot, and they will fit even better. you can toss in an inch of shackle to help out too. i would stay away from really tall body lifts. ick Jeepmangled87 01-29-2002, 01:40 PM no problem with that combo just trim out some fender if you have to.:D :flipoff2: :flipoff2: newbie!!! DozerDan 01-29-2002, 07:25 PM I often see people saying that you can run 33's with "no problems" with 3" of lift. I run 3.5 suspension, 2" body, TJ flares and 33's and at full flex I can stuff the tire completely up and in. I could go bigger but I would start to hit agian. Before the TJ flares I would rub. Just a thought | |