|
papabear 01-29-2002, 08:57 PM Can anyone tell me if the cv front xj or tj shaft will bolt on to the yj yoke or are the yokes different. Also, will the rear tcase housing from a tj work on a yj with a yj output shaft? Imkunfused 01-29-2002, 11:30 PM the front yoke you would need is a 2-4-4341.... the rear im unsure off.. maybe SOXJ 01-30-2002, 07:14 AM I've been playing around with the yokes on my 96 231J transfercase (from an XJ). The bolt holes for the CV seem to be located closer toghther, and are set up for bolts through the back. Jess at high angle driveline (one of the boards sponsors) says he sell's a 27 spline slip yoke that will bolt up to the 1310 cv housing your talking about...$79 bucks Good Luck, Thom | |