: D44 built for CJ7, ARB,hysteer,all new never ran, 6 lug or 8 lug
jonscj7 09-26-2004, 09:57 PM Chevy D44 narrowed for a cj7 spring width. 27.5"
ARB
4.10 gears.
63.5" wide WMS to WMS
or 65.5 with 8-lug
1" raised hysteer arms on both flat tops
1310 yoke.
new ujoints
new balljoints
new 6-lug rotors or turned 8-lug ones
new calipers and pads.
warn premium hubs
Very nicely painted and NEVER RAN FOUND A 60
$1200 with 6-lug or 8-lug outers
Jon 530-306-0767
JPBYDX 09-30-2004, 11:15 PM To bad your across the country. Been looking for that setup.
TTT.
jtaco1 10-01-2004, 09:30 AM Why can't these kind of deals happen around Pennsylvania.
jonscj7 10-03-2004, 10:00 AM shipping is only like $150 if your near a foward air teminal. I'll pallet it and take it to the terminal for free.
Jon
mike7065 10-07-2004, 08:52 AM Interested. is it still available.
Michael 510 357-2595
jonscj7 10-07-2004, 08:52 PM Yes, still have it, I'll try and give you a call.
Jon
530-306-0767
mike7065 10-09-2004, 05:36 PM I need driver side drop. I want to put ti in a YJ with np231.
jonscj7 10-09-2004, 09:00 PM no problem, thanks for the response back.
Jon
mike7065 10-10-2004, 09:07 AM huwhat?
jonscj7 10-10-2004, 07:10 PM oh shit I thought you figured out it was passenger side drop and that was your way of saying you did not want it. I was thanking you for not keeping me hanging, but I guess it won't wrok for you anyways so thanks for the response.
jon
mike7065 10-11-2004, 07:16 PM Are they original (real flat tops)
and is this a high pinion.
Sombody pick this up for parts if nothing else
jonscj7 10-11-2004, 07:37 PM real flat tops?? They are stock ones and I had the right side professionally milled drilled and tapped.
Not a high pinion.
Thanks Jon
jonscj7 10-25-2004, 08:57 PM TTT still have it...,may consider parting??
Thanks Jon
troyman 10-25-2004, 09:10 PM PM'd ya.
jonscj7 10-26-2004, 06:50 PM TTT sent one back.
Thanks JOn
norcaljeeper 10-27-2004, 12:55 PM ttt for ya if you are going to part put me in line for the arb
jonscj7 11-25-2004, 08:43 PM Ttt
jonscj7 01-06-2005, 11:15 PM Still have it.
Jon
RichCJ 01-07-2005, 07:59 AM Is it spring over or under?
Thanks,
Rich
StockChevy 01-07-2005, 05:05 PM You probably wouldn't want to sell just the pass. side flat top knuckle, would you?
Probably not, but figure it is worth asking :)
jonscj7 01-07-2005, 08:17 PM Rich, It is set up for spring over.
Stockchevy, Not right now
Thanks Jon
jonscj7 01-12-2005, 09:58 PM New price $650 without ARB and no carrier at all.
Thanks Jon
ASTAR 01-13-2005, 11:23 AM top, this is a great deal for someone!!!
JeepinDoug 01-13-2005, 05:18 PM I need to swap out my 5 lug to 8 lug.
Are the hubs internal?
Do you want to sell just the 8 lug stuff;
spindles/hubs/calipers/caliper mounts/rotors
Could you ship them or do I need to drive 150 miles?
Thanks, Doug
BayAreaWheeler 01-13-2005, 05:42 PM take a grand a case of beer and ill pick up?
kj
jonscj7 01-14-2005, 11:26 PM Thanks Jimmy, i just don't get it? This is a great deal.
I need to swap out my 5 lug to 8 lug.
Are the hubs internal?
Do you want to sell just the 8 lug stuff;
spindles/hubs/calipers/caliper mounts/rotors
Could you ship them or do I need to drive 150 miles?
Thanks, Doug
Yah they are forsale and I will ship, $200 for the good set or $125 for a set that needs a rotor, 3 studs and a bearing or two. I do not have calipers for either set. I will ship on your dime.
take a grand and a case of beer and ill pick up? Well since that is $350 more than I am asking I say its a deal! Just FYI I took out the ARB and lowered the price to $650firm. If your still interested let me know.
Thanks Jon
| |