|
ChevyMS87 10-08-2004, 08:08 AM i just finished puttin in my 14 bolt w disk brakes into my 95 tahoe. Much to my dismay i didnt factor in that my 15in rims might not fit over the calipers :smokin: im tryin to avoid buyin new rims so if i grind the shit out of the calipers should they fit or am i just wasting my time anyone done this before??? i would be grateful for any feedback thanks. brettmcox 10-08-2004, 09:22 AM you going 8 lug, using the 8 to 6 spacer, or did you do the redrill and grind method American 10-08-2004, 10:43 AM Grind it, but don't grind THRU it or GOUGE it... ChevyMS87 10-08-2004, 11:26 AM i actually had 6 lug hubs made for it, but thanks for the responses ill start grinding :smokin: Peter Zombori 10-08-2004, 05:39 PM you can get by without too much grinding if you keep the offset at 2-4 inches Triaged 10-08-2004, 07:20 PM Do you have steel or aluminum wheels? If they are steel grind till they fit. If they are aluminum you need to buy some larger or steel wheels! ChevyMS87 10-11-2004, 05:16 PM The rims have a lot of backspacing so that worked out great its in and they fit i thought i had to grind a ton turned out to be barley nothin thanks for the help. nvrenuf 10-12-2004, 08:16 AM I assume the truck has ABS, how are you dealing with that? Just curious... | |