The Model 4 Tube and Pipe Bender bends up to 2" Schedule 40 Pipe, 2-1/2" outside diameter round tubing, solid hot rolled steel to 1-1/2" (38 mm) diameter, flats up to 3" (75 mm) wide x 3/4" (18 mm) thick hot rolled steel. It weighs 170 lbs. with the hydraulic cylinder. All links and frame are precision CNC machined from 3/4" and 1" thick steel. All pins are high strength steel.

Painstakingly designed to last years in a hard working fabrication shop. The hydraulic cylinder for instance, swivels in a solid CNC machined steel block that pivots exactly at the cylinder's center, thereby preventing side loads on the cylinder's bearings and seals. The pusher block employs a swiveling bronze wear block to eliminate cylinder side loading.

The Model 4 employs a 10 ton single acting spring return cylinder with a stroke of 14". It will bend 90 degrees in less than two complete strokes and 180 bends typically require only three strokes

New Pricing

Model 4 air kit includes bender, ram, SPX Power Team 10,000 Psi Air/Hydraulic Pump
$1,540

Deluxe Model 4 Air Kit includes bender, ram, SPX Power Team 10,000 Psi Air/Hydraulic Pump and rolling pedestal
$1,739

Model 4 electric kit includes bender, ram, 4,000 Psi Elec/Hydraulic Pump with Hand Remote and Hose (110v)
$2,255

Deluxe Model 4 electric kit includes bender, ram, 4,000 Psi Elec/Hydraulic Pump with Hand Remote and Hose (110v) with a rolling pedestal $2,439


NOTE: NOTE: Most JD2 items are in stock and ready to ship, if not, lead times are approximately 1 week.

http://vansantent.com/images/prod_model4Bender.gif http://vansantent.com/images/prod_model4bender2.gif
Here are some common die sizes and pricing:

1-1/2" x 4.5 CLR x 180 degree die set $265
1-1/2" x 5.5 CLR x 180 degree die set $280
1-1/2" x 6.5 CLR x 180 degree die set $290
1-3/4" x 5.5 CLR x 180 degree die set $300
1-3/4" x 6.5 CLR x 180 degree die set $315
2" x 6.5 CLR x 180 degree die set $345

If you need any of these die sets right away, expedited service from my stock may be available, email or call Shane for details! Average shipping cost for a Deluxe Kit and one die set is anywhere between $95 and $115.

Want a quick shipping quote? Then I need 3 things from you:

1) Bender: Do you want the bender only or the complete deluxe kit?
2) Die sets: What die set do you need? Tube O.D. and CLR
3) ZIP Code

If you have any questions, need technical assistance or would like to place an order, please reply to this message or give me a call.

Shane Henderson
1-877-826-7268 x106
Shane@tricktools.com

Alan, do they make 180 degree bend dies for them? Also, is that electric/hydraulic cylinder available separatelt and could it be made to work a model 3?

All the dies are now 180 deg, this picture is outdated only as far as that die set goes. Yes, the Electric/Hydraulic setup is available for the Model 3 as well, the pump, hose, cylinder, yoke, etc., the whole deal, is $1718. Thats why the Model 4 looks like a pretty good value in comparison...

updaded

What's it's limits for bending Chromoly, and do they offer 1" or 1 5/8 dies? Air electric/1 die set/21214 Thanks Jim

What's it's limits for bending Chromoly, and do they offer 1" or 1 5/8 dies? Air electric/1 die set/21214 Thanks Jim


The model 4 can handle up to 2 1/2" OD .120 wall Chromoly. As the tube OD decreases, the wall thickness capacity increases.

Yes, we do have 1" and 1 5/8" dies. Here is a link to our die page, it will have prices also. http://vansantent.com/model_4_bender_dies.htm


This quote will include the 1" die.

Model 4 Tubing Bender $1,045
Air / Hydraulic Pump $395
Hydraulic Hose $75
M4B Die, 1" OD x 3" CLR, 180 degrees $145
Shipping, Handling & Insurance $108.74
Total $1768.74

Thanks!

Bump

Shane, call me when you get a chance.

Will the model 3 dies work in the model 4 bender?
jim

Yes, but you need to purchase an additional U-block.

Would you like pricing?

-Shane

price shipped to 82801

Model 4 with Air/Hydraulic
Model 4 Round Tube Die, 1-1/2", 5.5" CLR
Model 4 Round Tube Die, 1", 3" CLR
Model 4 Round Tube Die, 1-3/4", 5.5" CLR
TBSK-SE Tube Bender Survival Kit-SE
Smarttool8 Deluxe Digital SmartTool
355 & Blade Evolution Metal Cutting Chop Saw WITH BLADE

price shipped to 82801

Model 4 with Air/Hydraulic
Model 4 Round Tube Die, 1-1/2", 5.5" CLR
Model 4 Round Tube Die, 1", 3" CLR
Model 4 Round Tube Die, 1-3/4", 5.5" CLR
TBSK-SE Tube Bender Survival Kit-SE
Smarttool8 Deluxe Digital SmartTool
355 & Blade Evolution Metal Cutting Chop Saw WITH BLADE


Everything comes to $3,308.94
Shipping $261.93
Total $3,570.87

Thanks!

Thanks Shane, and Trick Tools
Ordered this morning.

Send in some pics of your projects when you are done, maybe we will post em' up on our website.

-Shane

Thanks Shane, and Trick Tools
Ordered this morning.

Enjoy!

:d

Thanks Shane, and Trick Tools
Ordered this morning.

No problem

:)

How many psi and how much tank volume is required for the air unit? And is the electric 110V or 220V?

Thanks
snick.

How many psi and how much tank volume is required for the air unit? And is the electric 110V or 220V?

Thanks
snick.



40 to 100 PSI is required. Here is more info on our pumps http://vansantent.com/hydraulic_info.htm

The electric pump is a 100v

I would like to switch over from the air-hydraulic to electric-hydraulic on my model 4.

I have the SPX ram.

Can I get a price for the electric/hydraulic pump. Also if I need a new fluid line?

shipped to 84107

I would like to switch over from the air-hydraulic to electric-hydraulic on my model 4.

I have the SPX ram.

Can I get a price for the electric/hydraulic pump. Also if I need a new fluid line?

shipped to 84107

1.5 HP Electric Pump (4000 lb.) with Hand Switch $1,195
Hydraulic Hose for Electric/Hyd Pump 69.50
Thanks!

Thanks Steve!

model 4 electric/hyd deluxe
round tube dies;
1"x3.5
1-1/4 x 3.5
1-1/2 x 4.5
1-3/4 x 5.5
shipped to 85365 business address

what's the lead time?
please p.m. me with info thanks!

PM sent

Thanks!

Electric / hydraulic model 4's now available!

pricing on a bender with a 1 3/4 die with a 5.5 and 6 raduis
and shipping to 95722

pm me if you can

Sean

pricing on a bender with a 1 3/4 die with a 5.5 and 6 raduis
and shipping to 95722

pm me if you can

Sean

Model 4 Tubing Bender Air / hyd $1,515
M4B Die, 1-3/4" OD x 5.5" CLR, 180 degrees $260
Shipping, Handling & Insurance $194.76
Total $1,969.76

Thanks!

pricing on a 1.25" x 3.5 (or 4.5) CLR model 3 die set to 91786 pls. :D

pricing on a 1.25" x 3.5 (or 4.5) CLR model 3 die set to 91786 pls. :D

M3B Die, 1-1/4" OD x 3.5" CLR, 180 degrees $175
Shipping, Handling & Insurance $24.78
Total $199.78


Thanks!

We need a bender for 2" tubes and a possibility of going hydro or air.
Thanks
ed

deluxe model 4 air/hydro kit w/ 1.5" tube 5.5 clr die. shipping to 95136. thanks

PM Sent

JMR elctric/hydraulic bender with stand, 1" 240*, 1 1/2" x 5"-240, 1 3/4"x 6"-240, 2"x 6" -240. 66521 Thanks

JMR elctric/hydraulic bender with stand, 1" 240*, 1 1/2" x 5"-240, 1 3/4"x 6"-240, 2"x 6" -240. 66521 Thanks

You have a PM.

Thank you!

I need a price and how soon it could be shipped out. 1" round tube 3" rad. shipped to 94509
Thanks

I need a price and how soon it could be shipped out. 1" round tube 3" rad. shipped to 94509
Thanks

PM Sent. Thank you!

price on model 4 (can I get it with ram only -already have air op pedal)
1 1/4 die and 1 3/4 say 5 inch ish rad.

84532 buiz address and lead time

price on model 4 (can I get it with ram only -already have air op pedal)
1 1/4 die and 1 3/4 say 5 inch ish rad.

84532 buiz address and lead time

Just sent you over a PM. Thanks!