|
fortcollinsk5 01-31-2002, 09:42 AM I realatively new to t-case hunting and I found a NP 205 in decent shape (probably could use a rebuild) the has a 32 spline input that was behind a TH400 for $150 but I would have to pay shipping...good deal or keep on looking... Chris Desertdueler 01-31-2002, 09:50 AM What year t-case is it? what type of outputs are on it? some have slip yoke front and rear, some have slip yokes in the front and some dont have slip yokes at all. Also what tranny are you useing because that makes a difference as well. fortcollinsk5 01-31-2002, 10:05 AM It has fixed yokes on both front and rear outputs...not sure what year...i think like 1977-1979...it is going to go behind a 700r4...so I need to put the different output shaft in the tranny. :flipoff2: Chris:flipoff2: onetonwillysands10 01-31-2002, 05:53 PM I believe a 205 from a th350 is a more desirable transfer case for putting behind a 700r-4..I thing the th350 205 has the correct shaft..but, 150 dollars for th400 205 is a pretty damn good price..I saw one the other day priced for $750...it did have the adapter though..Hope this helps.:D rodzzilla 01-31-2002, 08:21 PM Get it and then I can swap you my 27 Spline 205 so you don't have to switch your o/put :rolleyes: :rolleyes: :D :D (Just because I could use that for a doubler has nothing to do with it!):beer: bigblaze 02-01-2002, 09:41 AM well i was thinking the same thing as rodzilla, As in you would be better off with the th350 and i would swap you but what all is there( adapter?) and is it slip yoke on back of transfer case ? i have several th350 styles with and with out adapters so let me know if not no sweat Butch 02-01-2002, 12:27 PM A 205 from a TH400 will not work for you. That is a screaming price though. The TH400/205 has a 32 spline input that requires the hole in the case to be bigger. The bearing for your 27 spline input will fall right through the hole. You should buy it and sell it for about 350.00 then go get you a 205 from behind a 75 to 80 manual pickup and swap the input to what you need. BlueBeast 02-01-2002, 06:22 PM the 32 spline case is the one to get if you want to do a doubler! or just step up to a th400 chevota82 02-04-2002, 08:07 AM I need a 10 spline front output flatplate for the drive shaft for the 205 hewl35 02-04-2002, 10:31 AM Originally posted by chevota82 I need a 10 spline front output flatplate for the drive shaft for the 205 I've got one if no one has helped you. email me at hewl35@hotmail.com hewl35 02-04-2002, 10:39 AM Originally posted by bigblaze well i was thinking the same thing as rodzilla, As in you would be better off with the th350 and i would swap you but what all is there( adapter?) and is it slip yoke on back of transfer case ? i have several th350 styles with and with out adapters so let me know if not no sweat I could use a 350 to 205 adapter if you got one. Tried to send a email to your listed email address in the profile but it bounced. Not trying to step on toes here. rockslutscoutII 02-07-2002, 09:37 PM i have a 205 off a sm465 just as you need ill swap you for that 400/205 + a little cash also need for doubler rockslutscoutII 02-07-2002, 09:39 PM sorry e mail down 530 823- 7428 | |