Steel SM465 to NP203 Adapters

[DIRTYBIRD]

For those of you wanting to double up your 205... This is a factory like SM465 adapter that has hair on it. :eek: Weighing in a 28#'s, it's all steel. This unit pictured is in stock rotation. If your wanting to have a custom rotation built in, usually a turn around time of 2wks. Other orders are aprox. 1wk.
http://www.pirate4x4.com/forum/attachment.php?attachmentid=151895&stc=1

[DIRTYBIRD]

I can also get the 10 spline female inputs for the NP203. This adapter will fit Dodge and Chevy 203 boxes, when the input is replaced to 10 spline.
For more info...715/284/8575 or WWW.JEDSMACHINING.COM
Price for the adapter only is 325 plus UPS Ground.
http://www.pirate4x4.com/forum/attachment.php?attachmentid=151896&stc=1
http://www.pirate4x4.com/forum/attachment.php?attachmentid=151897&stc=1

[nvrenuf]

Just X's

[K2Orion]

red x

Price for the input gear??

[K30BB468]

I ONLY SEE RED

[DIRTYBIRD]

Sorry about the red... Now you should be able to see the gray :D

[SLICK RICK]

do you have any pics of this bolted up? do you make a shorter adaptor for an SM465 to married NP205 ? the factory one is too long... thanks
Rick

[DIRTYBIRD]

The output shaft would need to be replaced with a custom shortened version. This I do not have. I can build a shorter adapter, but w/o the short output/input, options are limited. If you have a 32 spline output, a shorter version could happen. Not sure on the lenght of splines on the 32. Either way your not going to save more than 2"'s. :(
The pics of 465 to 203, should have them posted in a few days.. :)

[mike781ton]

Can you please tell me what the price for the sm 465 to np 203 adapter is.

[DIRTYBIRD]

I have quit making these and do not have any on hand as of now... They were priced at 325$ plus S/H...
Give me a call of interested.... Still have some of the parts on hand, If your not in a big hurry could build a couple more...

Jon

715-284-8575