4" Turbo Back 14 Ga. Aluminized Diesel Exhaust $300

[socalchef]

I'm not a big vendor, in fact, i'm not a vendor at all. I bought my star to support the board as it's saved me way more money then what it cost for the star. Eventually I hope to hock my shirts to you, but not today. Today I just want to share a good deal.

I found T&J Diesel Performance on ebay, and met him last night to pick up my exhaust and found out he's a rock crawler, we got to talking and I've offered to work with him to sell some kits on here. I'm extremely happy with the transaction and hope to pass on the deals to you guys. I'll even get before and after audio for you guys with my Dodge as well as lots of pictures of the installed product.

Lifetime Warranty to the original owner, at an additional $49.00 I will add a Polished Stainless Steel Exhaust Tip.* It is a clamp-on, 15" in length with a rolled end that has a 30 degree slashcut.* It is manufactured by Cone engineering and is about 65 thousands thick.*

All clamps and hangers are included.

94-02 Dodge 5.9 CTD, any bed any cab configuration
99-Present Super Duty - Ford 7.3 L &*Turbo Back System for Ford*6.0 L Powerstroke Diesels 1999 & newer, F-250, F-350,F-450, Excursions & Duallys
00-Present Chevy/GM 6.6 Duramax

All systems are in stock and ready to ship. Shipping runs about $55, and these are big and heavy so it's a good deal. If you're local to Orange County, CA you can pick them up. Feel free to ask me questions or call Tom at 714-993-3860 from 8 am to 5 pm*Pacific Standard Time.

PM me or call Tom for any special requests, ie 5" or dual exhaust.

Be Sure to Mention the Pirate Special!


http://abendig.com/mydodgepics/bangit.jpg

[UGET IT]

I need a system like this one that will fit a 92 Dodge Cummins.......

Can you help me out?

Please PM with and answer!

[socalchef]

i'll see what i can do for you

[Scooterloo]

X2 on the 92 cummins, (long bed standard cab 4x4) thanks

[socalchef]

unfortunately guys, he doesn't have access to kits for the 92's, just 94 and up. i'm going to search around though and try to find a good deal on one somewhere for you.

[JRowe]

So how much for this exhaust for a 01 CTD. Are these aluminized Magnaflow exhausts, or just a magnaflow muffler. Are the clamps welded on the pipes, or are they on the hangers. Do you have any pics of this installed.


For the guys asking about the 1st gen exhausts, the best prices I've seen is on www.bigexhaust.com The price may be a little lower if you actually call to order (I was quoted a lower price than the site when I called).

socalchef, get back to me about the questions when you have time.

Thanks

[socalchef]

$355 shipped to you. It's a Magnaflow muffler, with clamps with hangers welded to them. I've been trying to get to installing mine but i'm in the middle of reworking the floor of my Jeep to fit the Atlas better. I should have pics/audio in two days. Might be able to do it tonight.

[JRowe]

Is that price with the tip? Does it have a 3.5" downpipe or a true 4"

Can you post a pic of the full system (or send me one), non installed is fine.

Thanks

[socalchef]

Sorry for taking so long, but, as I've said, I'm not doing this for a living, just sharing a source. I finally got a chance to get the exhaust installed and take a pic. No pics installed, it was getting dark by the time I was done. I also got some video of the exhaust sound. This is on my bone stock 99 CTD. The turbo definitely spools up faster. If you go this route and get this exhaust, I would only recommend that you don't tighten down the straps right away when installing it. slip all the parts together and then once everything fits right go through and tighten up all the ubolts/straps on the overlaps. I slid the tube all the way together and knowing I would probably regret it, tightened everything down. I was about 2" too short at the back and had to tear it down. Not a big deal but the ubolts/straps crimp the tube and made it hard to disassemble...wahh... anyhow, everything fit great, I've got some extra tube sticking out of the back that I'll cut down when I install the (optional) tip. Very happy with it, and for the price $355 shipped, no way it can be beat

Video (http://www.abendig.com/mydodgepics/exhaust.wmv)
http://abendig.com/mydodgepics/exhaust.jpg