you guys w/ a landcruiser axle up front do u have hi steer crossover?? where can i get the steering arms??


i'm gonna run a toy ifs steering box.. i need a good pump to power it.. where and how can i get one to fit that's got good juice? i got the stock 1.3L in an '88 zook..

if u don't have a short straightforward answer :flipoff:

if u don't have a short straightforward answer :flipoff:

With Questions like that you may never get a responce from anybody on this Board I got them and I'm not given it up Have a nice day newbie Right back at you:flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: The Rat has spoken

newbie this newbie that.. it's just a new screenname.. but i don't much care.. you talk to me like i've never been around pirate, but i think my 2 years here counts.. i'm just askin for simple answers.. i can go w/ toy hi steer arms after the disk brake conversion.. just wondering what everyone really liked...

thanks for your help!

Don't come flashing your (:flipoff: ) and want some answers quick! Try holding your breath !:flipoff:

i'm holdin it.. i think i'm turnin blue:rolleyes:

i could help ya', but then i'd kill you :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2:

just bolt on some high steer arms and make a new drag link. better yet put the land cruiser power steering on there. o yea :flipoff2: newbie

Originally posted by poppycock
i could help ya', but then i'd kill you :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2:

i'm already dead buddy..

Originally posted by gunracer1
just bolt on some high steer arms and make a new drag link. better yet put the land cruiser power steering on there. o yea :flipoff2: newbie

me not new.. n'm u guys.. i'm looking for hi steer arms.. and i'm not gettin all pro's or ott's.. i'm looking for a good company to get 'em from.. the rest of the steering is taken care of 'cept for a decision on what pump and who's kit to use or how to fab it to mount it...

Originally posted by kerry1.6-toyota
If your going to be using the FJ40 axle up front be prepared to have to possibly cut and turn the steering knuckles to eliminate bumpsteer, death wobble, compensate for pinion angle and accomadate larger tires. To be quite honest money might be better spent correcting the caster, rather than installing a high steer setup immediately.....In other words build it safe and correct first, then add on the goodies. Kerry @ SOS



rotating the knuckles will be the last step.. i'll fuck w/ that once everything else is setup and straight.. that's easy and won't take long and i won't know exactly what i want till it's hung and i know how it drives w/ the setup...

rotating knuckles costs almost nothing why would i spend $$ there?

Gee, if you've "been around" so long it seems like you would have figured out there is a Toyota Pirate board only a couple of clicks away, and with a search you would have found several vendors who sell aftermarket arms.





What, you think we're gonna make it easy on you after you come straight out with ":flipoff:" ? :rasta:


Have a :beer:, dude & lighten up!

Originally posted by kerry1.6-toyota
For high steer arms check over on the TLC BB or do a search.................But like I said and this is from experience................you'll end up with the steering up and out of harms way with the high steer setup , but you may not be able to steer it when your over 10 mph. Kerry @ SOS

sounds good.. i'll let u know how it works out.. what springs have u used on a zook when hangin' this axle.. mine'll just be under some yj springs... and about how high up was the pinion pointin'?

Originally posted by 0ILBURNER
Gee, if you've "been around" so long it seems like you would have figured out there is a Toyota Pirate board only a couple of clicks away, and with a search you would have found several vendors who sell aftermarket arms.





What, you think we're gonna make it easy on you after you come straight out with ":flipoff:" ? :rasta:


Have a :beer:, dude & lighten up!

the toyota board is where i used to hang.. i know where it is.. i know of most vendors but wondering if someone's found something really sweet here.. i wanna know who LIKES what.. and i hate a search.. i get bored fast sifting thru crap that doesn't answer what i'm curious about.. i like answers specifically to me and my questions so i can re-question...


no, i don't think you're gonna make it "easy" on me after i come out w/ a gay little picture of a guy giving the bird.. but you guys tryin to be badass and tough w/ me is actually just as easy on me as anything.. u can't get under this skin on a bb...


i will have a beer.. and trust me i'm light.. i just play the game too and don't take shit like a puss... we can all talk trash.. if u think i'm a pissed off dude, i'm sorry to seem like that, cause i'm not... i'm as laid back as they come..

Originally posted by kerry1.6-toyota
Safety and Drivability?
But hey I'm not here to argue.......just reponding to your question and with what I thought might be some helpful information.......Have a nice day! Kerry @ SOS

i know that buddy and i understand.. i appreciate it.. i guess i should have specified this is strictly a trail rig and doesn't see street... and i will rotate the knuckles if need be.. but only after all the rest is put together and i know what i got to work with.. but it's ALL gonna get done at the same time.. nothing's really coming before the other... but i gotta get the axle under there and put steering on it before i know if i wanna rotate.. that's all

Originally posted by slozook


the toyota board is where i used to hang.. i know where it is.. i know of most vendors but wondering if someone's found something really sweet here.. i wanna know who LIKES what.. and i hate a search.. i get bored fast sifting thru crap that doesn't answer what i'm curious about.. i like answers specifically to me and my questions so i can re-question...


no, i don't think you're gonna make it "easy" on me after i come out w/ a gay little picture of a guy giving the bird.. but you guys tryin to be badass and tough w/ me is actually just as easy on me as anything.. u can't get under this skin on a bb...


i will have a beer.. and trust me i'm light.. i just play the game too and don't take shit like a puss... we can all talk trash.. if u think i'm a pissed off dude, i'm sorry to seem like that, cause i'm not... i'm as laid back as they come..


:laughing: :laughing: :laughing: LMFAO :laughing: :laughing: :laughing: your so hard :flipoff2:

Originally posted by poppycock



:laughing: :laughing: :laughing: LMFAO :laughing: :laughing: :laughing: your so hard :flipoff2:


thanks poppy =]

Originally posted by kerry1.6-toyota
Safety and Drivability?
But hey I'm not here to argue.......just reponding to your question and with what I thought might be some helpful information.......Have a nice day! Kerry @ SOS


i found your post about this on the lc board.. after your spring over what'd u set the pinion angle to?? i say point it right at the tcase, which i kinda assume u about did, then just grind, rotate, measure, and weld your knuckles.. you'll have the very best of both worlds... killer perfect pinion angle and positive caster to your delight.. it'll return to center like a stock truck and track straight as an arrow! all it costs ya is a grindin' wheel, and a few electrodes or a few feet of mig wire... cheap and trick!

Its always easier written than done done done done dnoe done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done
.
.
.
.
.
.
.
.
.
.
.
.
.
..done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done

oops sorry guys got spellbound by this high intelectual thread:barf:

Originally posted by Rockrat
Its always easier written than done done done done dnoe done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done
.
.
.
.
.
.
.
.
.
.
.
.
.
..done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done done

oops sorry guys got spellbound by this high intelectual thread:barf:



fuck ya dumbass.. guess you spend too much time on the computer and too little time fabbing...

Originally posted by kerry1.6-toyota
FINALLY>>>>>>>>>>>>>NOW IT'S DEAD!!!!!!!!!!!!!Thank You

no offense, but what in the hell are u talkin about??

Originally posted by kerry1.6-toyota
Talkin' about trading ideas and information rather than doin' the dozens..............So by stating that
" good it's dead" maybe all the slammin' and pointing fingers, and cursing at people would stop and we'd get back to talkin' about wheelin' and not this bullsh*t!
Kerry

hey buddy.. don't tell me.. i asked a question and got a lot of crap instead of answers.. i wanna talk wheelin more than anyone.. but now that everyone is postin' stuff totally related to how few posts my name has and not my question i'm firin' back... u find one post where i started talking about something other than wheelin that wasn't a direct reply to someone's slandering remarks... that's what i thought...

Kerry, where'd all your posts go?????????? what u guys can't handle a quote-un-quote "newbie"... just so you know i quoted every post you wrote.. so deleting all your posts did nothing... i don't understand you guys sometimes!!?? is there a big deal going on here that i'm missing cause i don't think so..???