I am looking to put a multilink setup on the rear of my 90 GMC I just recently completed the solid axle swap on the front, and after haveing some run around with trying to get rear springs I am thinking about putting a multilink setup on the rear of my truck, with some fox or king coil shocks. I talked to a buddy of mine who builds custom race trucks and he said I would be best with a standard A multilink with 2 bars off the differential to the fram and 2 standard ladder bars. I was just wondering if anyone had some good pics and ideas of this setup or even others. I am currently running a 14 bolt FF and I am going to be running 38 or 40's on this setup. Thanks for the imput guys. Here is what im working with. Right now I have 11 inches of suspension, 2 inch body lift, and 35" goodyear mtrs.

http://memimage.cardomain.net/member_images/4/web/160000-160999/160493_221_full.jpg

i also am looking to do the same... some one post up some pics/ideas

here is one thread that will be helpful

http://www.pirate4x4.com/forum/showthread.php?t=168577&highlight=link+dummies