Anyone got one? Six spline Dana 20 bull gear. Let me know. I know Tom has about 100 of the 27 Spline bulls for the auto's.

Thanks Joe

If you find one, make sure it has the right tooth pitch, there are a couple of different ones. Here's an interchange chart -

http://www.novak-adapt.com/knowledge/transfer_case_gears_grid.htm

Originally posted by Ben W
If you find one, make sure it has the right tooth pitch, there are a couple of different ones. Here's an interchange chart -

http://www.novak-adapt.com/knowledge/transfer_case_gears_grid.htm

Thanks I've been looking for that chart. I'll edit the post to reflect the fact that I'm looking for a Scout II bull gear 74-79 should work. I do have an older bull and was wondering if it would work in one of my older D20 cases.

Joe

Originally posted by jdjanda
Anyone got one? Six spline Dana 20 bull gear. Let me know. I know Tom has about 100 of the 27 Spline bulls for the auto's.

Thanks Joe

The pitch thing is a new one for me! :)

I might have an extra stick bull gear, too.

I have a 6-spline bull-gear for a Bronco Dana 20 that's replacing the one on my T19-wide..

I have a couple 3spds lying around that could loan out their gear until I free up the one on the T19 if you can't find one elsewhere.

I was taking stock last night and realized I don't have another Dana 20 to put in the race truck. D'oh. I've run out!

I s'pose since I don't usually go wheelin' the same day I'm racing that the trail rig doesn't *really* need it's t'case.. LOL

I need to finish my twin-stick 2.46 project and free up an extra 'case again. Dang.

-Tom

I have 3 off them 6 spline 4-speed/dana 20 gears, $10.00 plus shipping, and quite a few 26 spline auto/dana 20 gears. Let me know

i will buy whatever is left, all of them if their all off scout transfer cases with the correct tooth pitch. How many do you have?

Originally posted by TERRA-IZER
I have 3 off them 6 spline 4-speed/dana 20 gears, $10.00 plus shipping, and quite a few 26 spline auto/dana 20 gears. Let me know

Email me, my zip is 94521, shipping should be under $10.00, so you want to call it $20.00 even. Let me know the best way to get you the money, Pay Pal, check, etc.

Thanks Joe

Joe, i e-mailed you.

Hey Terra-izer,

Was that your bad ass Terra/Traveler at RMIHR and you I spoke with?
Name sounds familiar. Hows it going these days?

I could use one or two of your spares around here. E-mail me and let me know. Thanks

All this talk about Bull Gears makes me think there is hope. I am trying to set up a dual Dana 20 to Dana 20 married set up, but I can't find the one missing piece.

The Bull gear - 10 spline with 26 tooth outer (helicut).

I need this gear to make this project happen. Anyone got one for a reasonable price?

Ritch :D

Originally posted by nwmud
All this talk about Bull Gears makes me think there is hope. I am trying to set up a dual Dana 20 to Dana 20 married set up, but I can't find the one missing piece.

The Bull gear - 10 spline with 26 tooth outer (helicut).

I need this gear to make this project happen. Anyone got one for a reasonable price?

Ritch :D

Try Boarder Parts in Cal. Can't find the number but they should have it.

Joe

border parts spring valley ca, (san diego)
619 461 0171 ask for john