Dana 300 yoke ?s

[3vze]

I need to get 1310 CV Drivelines on the front and rear of my D300, The stock yokes are U-joint style correct ?
Are there any jeeps/D300 that had CV yokes and drivelines stock and if so what models, years etc...
I know I can get these yokes from most driveline places but for 65 bux.

Anyone know if the 1310 yoke bolts to other makes (ford etc) versions of the CV yoke style driveline ?

Thanks, appreciate it

[ghettojeep]

I bought the yoke for the CV from the local DS shop. Cost me like $25, he hooked a deal.

[3vze]

anyone else care to chime in ?

[Brian1]

Did you try a search?-
http://www.pirate4x4.com/forum/showthread.php?t=205271&highlight=dana+cv+yoke
http://www.pirate4x4.com/forum/showthread.php?t=116807&highlight=dana+cv+yoke
http://www.pirate4x4.com/forum/showthread.php?t=66177&highlight=dana+cv+yoke
http://www.pirate4x4.com/forum/showthread.php?t=124951&highlight=dana+cv+yoke

[Old Scout]

It's dana spicer # 2-4-4341. I paid 27.50 for it.

[3vze]

Brian1, I did a search but apparently used the wrong terms.
Ok so now I have my info....still need to know if the 1310 cv yoke is the same on the jeeps and fords ?

[3vze]

Old scout where did you find it for that price ?

[frostytj]

Old scout where did you find it for that price ?

I would wager a guess that he got it from
HERE (http://www.pirate4x4.com/forum/showthread.php?t=281468)

[HEEPJEEP]

Front outputs off jeep XJ/MJ/TJ with the NP231. Grand waggy front output with the NP229/NP228/Quadratrac case/maybe the NP208 (not sure on that one). It is 26 spline, very easy to find/get cheap.

[Murph]

Or you can be really fat and lazy like me and call Jesse and get them from him...


Andy

[Old Scout]

I would wager a guess that he got it from
HERE (http://www.pirate4x4.com/forum/showthread.php?t=281468)
Thanks. :cool2:

[3vze]

Its 47 bux there