Clocking Ring Dana 300 NP 208 or 241 $55 + flat rate shipping [Archive]

Greatlakeoffroad

10-21-2004, 07:31 PM

I have 10 sets available for a special price to all PBB members. This ring will lay your Dana 300 transfer case flat. Just what you need for that added ground clearance. You will not find a cheaper price anywhere. The flat rate shipping is $6 So your all looking at a grand total of $61 Where else can you gain this kind of ground clearance for $61 Thanks again for your support. Drop me a line and we'll get these coming. Shawn

http://i21.ebayimg.com/01/i/02/1d/f5/83_1_b.JPG

ray balcom

11-06-2004, 09:30 PM

Questions:
1. Are any left?
2. How thick is the clocking ring?
3. What are the degree increments?
I need to know this since ....i'm running a dodge hd nv4500 29 spline to a jeep d300 in a scout.....raysubtropical@comcast.net
thanks in advance

MountaineerMac

11-17-2004, 09:47 PM

Also curious as to how thick they are. Needing a 7/8 ring so we don't have to trim my buddies tranny output...Awesome price, btw.

offroadman83

11-17-2004, 10:51 PM

So I have a tf727 hooked up to the dana 300. Will this clocking ring work for me. I am buying a cj with this combo and would love to have a flat belly===Kyle

Greatlakeoffroad

11-21-2004, 02:40 PM

This will work and the ring is 3/8" thick, This is the only thickness we make but we could custom make ring OD/ID only from 1/2" and this would get the thickness right for you but you would have to drill the holes once you figure out where you want it clocked. Thanks Shawn
So I have a tf727 hooked up to the dana 300. Will this clocking ring work for me. I am buying a cj with this combo and would love to have a flat belly===Kyle

Blair

11-23-2004, 07:29 PM

PM sent

tacoma73

11-24-2004, 06:36 PM

what transmissions will this work on? I ask because I need to clock a th400/np208 combo. That would be great to tuck it up.

darius

11-24-2004, 11:13 PM

so will this work if i was tryin to put a 300 in a cherokee that has a 231

Greatlakeoffroad

11-25-2004, 02:13 AM

Replied, Thanks Shawn
PM sent

Greatlakeoffroad

11-25-2004, 02:14 AM

This will work on your application, Thanks Shawn
what transmissions will this work on? I ask because I need to clock a th400/np208 combo. That would be great to tuck it up.

Greatlakeoffroad

11-25-2004, 02:15 AM

If the 231 has the same mount pattern as a 300 which to be honest I'm not sure of? Can anyone confirm this? Thanks Shawn
so will this work if i was tryin to put a 300 in a cherokee that has a 231

wrathORC

11-29-2004, 10:06 PM

Got any of these left? How do I go about purchasing one? Do USPS money orders suffice?

Thanks
-Brian
CyberSniper on CK5

gtkustoms

11-30-2004, 08:36 AM

very interested if you have any left

send me a PM on where to send some money

thanks
travis

Greatlakeoffroad

12-04-2004, 10:38 PM

Those work for payment. PM me if your interested and we'll get this rolling. Thanks Shawn
Got any of these left? How do I go about purchasing one? Do USPS money orders suffice?

Thanks
-Brian
CyberSniper on CK5

ruffram

12-08-2004, 08:52 AM

How about a TF727/ NP208 combo?? Want to clock it down instead of up, will it work for that??

Greatlakeoffroad

12-11-2004, 06:07 AM

No, the ring is machined in one direction and it is to gain clearance only. Thanks Shawn

How about a TF727/ NP208 combo?? Want to clock it down instead of up, will it work for that??

mikesagpn

12-11-2004, 11:04 PM

PM sent

jmj85

12-14-2004, 08:18 AM

BulldogCJ5

12-16-2004, 07:10 AM

:jeep: Sent a PM. Looking for Price and Shipping to 91977.

Greatlakeoffroad

12-17-2004, 05:41 PM

$40 Thanks ShawnSo how much for a spacer?

Greatlakeoffroad

12-17-2004, 05:41 PM

PM'ed you, Thanks Shawn
:jeep: Sent a PM. Looking for Price and Shipping to 91977.

The Rockslut

12-17-2004, 05:52 PM

Do you need a seal extension??? I have a 727/300. I had another brand of clocking ring that was 5/16" thick and it came with a seal extension.

Greatlakeoffroad

12-18-2004, 06:14 AM

Most generally you do not. In fact no one has ever complained of this being a problem. I'm aware some of my competition sell these w/ a seal extension, however we do not. But if you do need one I can get the PN# for you, as they are realatively inexpensive. Thanks Shawn

Do you need a seal extension??? I have a 727/300. I had another brand of clocking ring that was 5/16" thick and it came with a seal extension.

Randall Edge

12-21-2004, 09:56 PM

Sent you a PM.

boltdude

01-02-2005, 09:23 PM

I sent you a money order. Did you recieve it yet?

Greatlakeoffroad

01-03-2005, 07:02 PM

PMed you Thanks Shawn
Sent you a PM.

Greatlakeoffroad

01-03-2005, 07:03 PM

PM me your shipping name and addy so I can pull up the tracking info for you. Thanks Shawn
I sent you a money order. Did you recieve it yet?

Janoso

02-09-2005, 02:58 AM

I am bolting up an atlas ll behind an np203 doubler w/ 40" tires-4.56 gears on a scout. do you think your 3/8" thick ring will hold up?

Greatlakeoffroad

03-13-2005, 08:42 PM

Hey guys sorry for the no posts here lately. I have been swamped and just been replying to e-mails and PM's not actually pushing our products at the posts as my time has been limited to filling orders mostly. I appreciate all your support and as always give you guys the best pricing and priority service but please bear with me we are going through some major growing pains which we are addressing and should be pushing our sales better here very shortly. In the meantime the best way to get ahold of us is still via the e-mail which is Shawn4x4@greatlakeoffroad.com again thanks for all your support. Sincerely, Shawn

Greatlakeoffroad

03-26-2005, 08:25 AM

Thanks for all your support. Shawn

Greatlakeoffroad

04-08-2005, 04:31 PM

ttt

aven2rus

04-12-2005, 10:17 AM

Shawn I sent an e-mail on the payment options. Let me know via that e-mail if it works for you.
Thanks,
Tom ONeil

dane

04-12-2005, 06:55 PM

I have a SM465 with an advance adapter to a dana 300, will the clocking ring work for my application???

Dane

aven2rus

04-13-2005, 07:22 AM

Shawn,
I had payment made through my brother Dan's Pay Pal account. He changed the shipping address to reflect mine so we should be good to go.
Please respond to either of us as to when it will ship.
Thanks,
Tom ONeil

Greatlakeoffroad

04-25-2005, 08:51 PM

ttt

UGLY

04-27-2005, 09:47 AM

Sent you an e-mail.

witz

05-05-2005, 09:24 AM

Are there any problems by reducing the contact area on the input shaft by the 3/8"? How does this hold up long term in the field?

davidt

05-14-2005, 01:16 PM

sent you an email...

Greatlakeoffroad

05-22-2005, 12:13 PM

Of the several hundred I have out on the trails/roads over the last couple of years i have heard of no complaints. Thanks Shawn

Are there any problems by reducing the contact area on the input shaft by the 3/8"? How does this hold up long term in the field?

Greatlakeoffroad

06-11-2005, 06:32 PM

Everything Shipped. Thanks Shawn

pcoplin

06-13-2005, 11:28 AM

Would this allow me to flip a D300 for a driver side drop?

Greatlakeoffroad

06-21-2005, 03:56 PM

I don't be;ieve so maybe with a mod or two possibly. Thanks Shawn

Would this allow me to flip a D300 for a driver side drop?

wrathORC

06-22-2005, 07:33 AM

Have you considered drilling more holes in these? You could then use it on Fords and Dodges... and IFS Chevy/Dodge 231s and 241s... and Jeep 231s... and S-series Chevy 231s. They all have the same pattern but the clocking is different. With the ability to merely swap inputs on all these transfer cases to couple them to different transmissions the only thing holding you back is the factory clocked orientation.

It's something to consider. I know I'd buy one. I've got one of yours I bought from you last Fall and am quite happy with it. But, I could use one with more holes in it for another application.

Greatlakeoffroad

06-23-2005, 09:45 PM

We can and I may do this but we would have to charge more for the extra machining. Thanks Shawn

Have you considered drilling more holes in these? You could then use it on Fords and Dodges... and IFS Chevy/Dodge 231s and 241s... and Jeep 231s... and S-series Chevy 231s. They all have the same pattern but the clocking is different. With the ability to merely swap inputs on all these transfer cases to couple them to different transmissions the only thing holding you back is the factory clocked orientation.

It's something to consider. I know I'd buy one. I've got one of yours I bought from you last Fall and am quite happy with it. But, I could use one with more holes in it for another application.

cybersniper

07-04-2005, 08:59 AM

I have found the way to attach the Rover 727 to my NP231 but Y will need an aluminium adaptor that I can use to weld it to my system. The thickest the better.

I NEED ONE
Eduardo

adaptor

Monsterbronc

07-06-2005, 08:33 AM

Just wondering if you make or can make a clock ring that I can use on chevy 241 behind a 700R combo. If it's possible send me a PM on the price when you have time. Thx,

Greatlakeoffroad

07-09-2005, 08:48 AM

If I'm not mistaken this is what you need. Thanks Shawn

Just wondering if you make or can make a clock ring that I can use on chevy 241 behind a 700R combo. If it's possible send me a PM on the price when you have time. Thx,

Greatlakeoffroad

07-15-2005, 02:56 PM

bump

Greatlakeoffroad

07-16-2005, 09:02 PM

We also now accept credit cards for payment however to keep prices low for everyone there will be a $10 minimum or 10% (whichever is more) convenience fee added to the total purchase amount. Thanks Shawn

busteddodge

07-19-2005, 08:35 PM

Got a dodge 727 with a np241D behind it. Can I use your ring to clock it up?

Thanks.

Greatlakeoffroad

07-20-2005, 09:55 PM

Yes you can, Let me know via e-mail and we'll hook you up with payment options. Thanks Shawn

Got a dodge 727 with a np241D behind it. Can I use your ring to clock it up?

Thanks.

Big4x4Rides

07-20-2005, 11:29 PM

still have these for $67?

Greatlakeoffroad

07-21-2005, 08:43 AM

Yes send me an e-mail and I will hook you up. Thanks Shawn

still have these for $67?

Greatlakeoffroad

08-07-2005, 09:17 AM

bump

erg801

08-09-2005, 02:47 PM

Is this the dana300 to ax15 ring?

Greatlakeoffroad

08-09-2005, 08:40 PM

I should not see why this would not work on your Tranny and yes it is for all D-300's Thanks Shawn

Is this the dana300 to ax15 ring?

Greatlakeoffroad

09-10-2005, 02:32 PM

bump

jpnjim

11-16-2005, 09:40 PM

So how much for a spacer?

$40 Thanks Shawn

Hi Shawn,
Just to clarify
That's $40 + shipping, for a spacer with no hardware?

How much would a 1/2" spacer be?

Thanks,
Jimmy

BTW, I bought one of your clocking rings second hand/unused, and it's a nice high quality piece :beer:

snacksnack

11-17-2005, 01:07 AM

Do or can you make one for the np205? specific 205 to c-6 ford

eDaddi

11-21-2005, 04:28 PM

Can these still be had for $67?

Looking to get two....

one to go between a Jeep T18 and Scout D300 and one to go between a Scout D300 and ScoutD300...Pretty much the same......you forsee any problems there?

Greatlakeoffroad

11-24-2005, 05:50 PM

yes

Can these still be had for $67?

Looking to get two....

one to go between a Jeep T18 and Scout D300 and one to go between a Scout D300 and ScoutD300...Pretty much the same......you forsee any problems there?

jpnjim

11-24-2005, 08:19 PM

Shawn,
You mentioned using 1/2" stock earlier in this post,

price for 1/2" spacer?

3/8" spacer? ($40 as above?).

I'll even take one undrilled if that's easier :beer:
Thanks,
Jimmy

tobyw

12-15-2005, 08:22 AM

Still have any 300/231 rings for $67 shipped?

Greatlakeoffroad

12-15-2005, 05:52 PM

Yes e-mail me if interested. Thanks Shawn

Still have any 300/231 rings for $67 shipped?

OklaK5Guy

12-28-2005, 11:25 AM

700R4 to 208, will this ring work? would like some extra clearance. Also, if I clcok it, will it oil ok?

Stowe

12-29-2005, 03:48 PM

Email sent.

PORTER

12-31-2005, 02:02 PM

If you have any left, I want one. I will call you Monday to arrange payment.

Greatlakeoffroad

01-01-2006, 07:54 PM

Yes it will work never had an issuew with oiling. thanks Shawn

700R4 to 208, will this ring work? would like some extra clearance. Also, if I clcok it, will it oil ok?

Greatlakeoffroad

01-01-2006, 07:55 PM

We always have them. Thanks Shawn

If you have any left, I want one. I will call you Monday to arrange payment.

DRKelly

01-04-2006, 02:48 PM

700R4 to 208, will this ring work? would like some extra clearance. Also, if I clcok it, will it oil ok?

My buddy has been running this ring with that exact combination for a few months or so now. No problems so far and he has it clocked up in the third hole for the highest position to make it flat. He also built a fixed rear yoke for it using the rear of a Dodge 208. It is in a cab truck with tons and 40's and driven fairly hard. I can get some pics of it if you want.

Here is the driver side drop 208 in my Bronco. I had Shawn counter sink the mounting holes from the opposite side so it would clock a driver side drop up. I put the stud in the first hole and it clocked it flat. No run time on it yet though, the truck is still under construction.

Before:
http://www.supermotors.org/getfile/196038/fullsize/IMGP0617.JPG

After:
http://www.supermotors.org/getfile/196046/fullsize/IMGP0640.JPG

Greatlakeoffroad

01-04-2006, 06:41 PM

Beautiful Pics Thanks for the props, Shawn

My buddy has been running this ring with that exact combination for a few months or so now. No problems so far and he has it clocked up in the third hole for the highest position to make it flat. He also built a fixed rear yoke for it using the rear of a Dodge 208. It is in a cab truck with tons and 40's and driven fairly hard. I can get some pics of it if you want.

Here is the driver side drop 208 in my Bronco. I had Shawn counter sink the mounting holes from the opposite side so it would clock a driver side drop up. I put the stud in the first hole and it clocked it flat. No run time on it yet though, the truck is still under construction.

Before:
http://www.supermotors.org/getfile/196038/fullsize/IMGP0617.JPG

After:
http://www.supermotors.org/getfile/196046/fullsize/IMGP0640.JPG

PORTER

01-05-2006, 09:42 AM

I left a message on your phone, please call me back asap.

wrathORC

01-08-2006, 01:16 PM

Stowe

01-08-2006, 10:15 PM

Are you planning on offering these with either more holes drilled in them or perhaps flipped backwards (countersunk the other way) for those of us that want to clock driver-drop cases?

I have a couple of your standard clocking ring setups and they worked beautifully... but now it's time to clock a driver drop Chevy NP241.

This would be great... I could use one to clock my Ford NP205. If I were to use your product, I would have to notch the ring for the shifters, counter sink the holes and one hole wont line up... can you do anything that would work for us odd balls? I can cut my own notch.

Mickey*B

01-25-2006, 08:38 PM

Please PM total for Clocking and shipping to 80631.

Thanks

guffey24

01-28-2006, 03:20 PM

Will this clocking ring work with the nv3550 tranny and dana 300?

If so I want one, email me and give me a price, shipping to 28658

88 mangler

01-28-2006, 05:06 PM

hey....we just put this ring on a t999 in a yj with (D300)....the t-case input comes up short of the tranny seal....... does this mean this ring will not work with this tranny?

clint

broncoboy351

01-28-2006, 06:16 PM

I need one of these, please email me payment info.

Greatlakeoffroad

01-29-2006, 03:41 AM

You have an e-mail. Thanks Shawn

Please PM total for Clocking and shipping to 80631.

Thanks

Greatlakeoffroad

01-29-2006, 03:42 AM

You have an e-mail. Thanks Shawn

Will this clocking ring work with the nv3550 tranny and dana 300?

If so I want one, email me and give me a price, shipping to 28658

Greatlakeoffroad

01-29-2006, 03:43 AM

You have an e-mail quote. Thanks Shawn

I need one of these, please email me payment info.

Greatlakeoffroad

01-29-2006, 03:44 AM

No it will work you are just one of the unlucky few who needs a speedi sleeve to extend the sealing area. I sent you an e-mail w/ all info for getting one. And for everyones info about 1-25 apps needs this that is why I do not add it in and it keeps prices low. Thanks Shawn

hey....we just put this ring on a t999 in a yj with (D300)....the t-case input comes up short of the tranny seal....... does this mean this ring will not work with this tranny?

clint

88 mangler

01-29-2006, 01:09 PM

i got one, and its on its way. thanks for all the help!

clint

huit-huit

01-29-2006, 05:15 PM

any left

bigblackblur

01-30-2006, 07:08 PM

any left? And will this work with a jeep th400 to D300? Send me a PM with payment info will buy ASAP.

Stowe

01-30-2006, 10:00 PM

With a nip here and a tuck there I was able to clock my Ford NP205. Thanks!!

Ploy22

02-01-2006, 09:52 PM

e-mail sent

bigblackblur

02-02-2006, 10:51 PM

you guys alive?

Corxy

02-06-2006, 10:26 PM

Do you have any of these left? i would like to get one from you if i could.. pm me with info please.

Greatlakeoffroad

02-12-2006, 06:02 PM

Alive and very busy if you need an immediate response I have my e-mail listed in all my posts and this is the quickest way to touch base w/ me. I have these in stock and ready to roll > let me know. Thanks Shawn

huit-huit

02-13-2006, 06:25 PM

Squab41

03-13-2006, 12:19 AM

I'm interested in one of these. Can you PM me or email me at Squab41@aol.com ?
Thanks.

Greatlakeoffroad

03-19-2006, 09:24 AM

To make this work I have had customers in the past cut off 3/4" of their shaft otherwise you need a 3/4" spacer which I do not make to take up the gap. Thanks Shawn

Brad

04-16-2006, 05:33 AM

I have a SM420 with an advance adapter to a dana 300, will the clocking ring work for my application???

RODDOGGER

04-19-2006, 07:05 PM

Shawn, sent you an email for NP 241 clocking ring.

roger201

05-04-2006, 08:34 PM

i need one for np208 called your shop couple times

roger201

05-16-2006, 04:00 PM

called left a message, need one for d300 asap please call 5863035523 thanks roger

mountainhead

06-02-2006, 02:23 PM

I want one of these rings, do you still have any? Do you take paypal?

mountainhead

06-02-2006, 03:15 PM

I called and left you a message. I want to buy one of your D300 clocking rings please.

Greatlakeoffroad

06-08-2006, 05:55 AM

You have all been contacted. 260-387-1428 ask for Tonya or e-mail her at the addy below, she can get you taken care of. Thanks Shawn

theviper90210

08-03-2006, 01:52 PM

do you have any of these left and will it work with a cherokee ax-15 to clock the np231 to work with a wrangler yj, Thanks let me know

Greatlakeoffroad

08-03-2006, 02:44 PM

Yep, I have them should work call me to go over the details or PM me your # Thanks Shawn

260-387-1428

Greatlakeoffroad

09-21-2006, 07:05 PM

ttt

roger201

10-03-2006, 05:16 PM

will this work with a down east offroad flip kit

Greatlakeoffroad

10-03-2006, 07:59 PM

have no idea what that is sorry.

roger201

10-03-2006, 09:13 PM

have no idea what that is sorry.
it flips the d300 to the driver side and i want to clock it flat

Greatlakeoffroad

11-02-2006, 06:45 PM

Ttt

Sound_Man

11-05-2006, 09:38 AM

anything for an np205?

littlejohn

11-08-2006, 01:35 PM

Need a quote for a clocking ring:

TF999 to Dana 300- Do I need a special seal/adapter?

Thanks

John

Greatlakeoffroad

11-08-2006, 04:19 PM

Not at this time, however PM me I may have something your interested in. Thanks Shawn

Greatlakeoffroad

11-08-2006, 04:20 PM

Most likely the seal extention is not needed. These are $67 TYD. Let me know. Thanks Shawn

Need a quote for a clocking ring:

TF999 to Dana 300- Do I need a special seal/adapter?

Thanks

John

Big4x4Rides

11-18-2006, 11:09 AM

just curious what you guys are using to seal these up, i put mine in and it does not seal at all no idea what to do anymore. All the bolts were loc tited, and i used right stuff sealant but no luck.

upj wheeler

11-20-2006, 08:40 AM

This past weekend I installed my ring, and got everything bolted back together, but when it came time to raise everything into position for the flat skidplate (I have a 2" BL) the upper half of the stock fan on my 258 was pressed upagainst my radiator. ?????? anyone else experience this? I had to put my stock skid plate back on temporarily so it was driveable. The only thing that I have come up with is to take off the mechanical fan and put an electric pusher fan infront of the radiator. Any other input or ideas???

bggrnchvy

11-21-2006, 03:18 AM

just curious what you guys are using to seal these up, i put mine in and it does not seal at all no idea what to do anymore. All the bolts were loc tited, and i used right stuff sealant but no luck.

Replace the short countersunk cap screws that come in the kit for a set that are about 1" long. I couldn't solve my leaking until I did that, I also found a couple of the holes stripped when I did this from to little engagement.

Greatlakeoffroad

11-27-2006, 05:52 PM

You need a $10 seal extension e-mail me and we will get you a PN. 1 out of every 10 needs one. Most do not but some setups do. Thanks Shawn

just curious what you guys are using to seal these up, i put mine in and it does not seal at all no idea what to do anymore. All the bolts were loc tited, and i used right stuff sealant but no luck.

Greatlakeoffroad

11-27-2006, 05:54 PM

The bolts that come w/ it are 1.5" long there should not be an issue. We had several kits go out for a short period of time that were too short. We also offered new bolts to be sent out to those who needed them. Thanks Shawn

Replace the short countersunk cap screws that come in the kit for a set that are about 1" long. I couldn't solve my leaking until I did that, I also found a couple of the holes stripped when I did this from to little engagement.

mdub

11-30-2006, 10:04 AM

quote for D300 w/T-176...will i need the seal extension? shipped to 03820.

Greatlakeoffroad

11-30-2006, 11:16 AM

$67 TYD most likely not on the extension. Thanks Shawn

quote for D300 w/T-176...will i need the seal extension? shipped to 03820.

Ben Holloway

02-21-2007, 08:14 PM

do you still have these shawn? I need one for my 4500 300 combo, how much is the seal extension?

Ben

Greatlakeoffroad

02-22-2007, 09:25 PM

Always have them, typically the seal extension is not needed. However if it is I can find you a local seal extension dealer and I believe they are under $10 Thanks Shawn

do you still have these shawn? I need one for my 4500 300 combo, how much is the seal extension?

Ben

busteddodge

02-23-2007, 06:59 AM

I've got an '89 dodge factory setup. It's an np435 mounted to a 241 with a factory adapter. Will this ring work for me?

Thanks.

greenrollover

02-23-2007, 12:41 PM

do you have a ax15 to 231 clocking ring the 300 should work i think and how much are they i didn't read all the posts

Josho

02-23-2007, 11:32 PM

i need one for my 300 asap. i have it behind a yota box and need top clock it up a bit. i called and couldn't reach anyone.

thanks, holley

cj7zrcool

03-01-2007, 09:17 AM

Will a ring to clock a D300 mounted to a T18A need the seal extension? Ring shipped to business @ 76082 is $67?

Greatlakeoffroad

08-03-2007, 11:04 AM

Wow! Long time since I visited this thread. TTT, Thanks Shawn

Greatlakeoffroad

08-16-2007, 05:22 PM

ttt

pharmd

09-05-2007, 05:44 PM

What do I need to clock a passenger chevy NP241-c. It connects to a 4L60 via the stock adapter. Going to 11102.

Greatlakeoffroad

09-05-2007, 07:49 PM

You have a PM, Thanks Shawn

What do I need to clock a passenger chevy NP241-c. It connects to a 4L60 via the stock adapter. Going to 11102.

COVEJEEPSXJ

11-08-2007, 09:10 AM

Do you make these is 7/8" thickness for putting a D300 behind an AW4?

Greatlakeoffroad

11-13-2007, 06:50 PM

No sorry I do not. thanks Shawn

T.mac

12-13-2007, 01:28 PM

ttt

Thanks! the ring looks good and it got here fast!

Greatlakeoffroad

04-03-2008, 11:31 AM

Always in stock

Greatlakeoffroad

04-22-2008, 12:59 PM

Bump

Halogrinder

05-05-2008, 09:30 PM

this will work with the chevy 205 w/ the round input setup, right?

PM me tomorrow, ill get some $$$ on the way :)

Greatlakeoffroad

05-06-2008, 11:19 AM

I do not believe so, I think it will give you sealing issues. Thanks Shawn

this will work with the chevy 205 w/ the round input setup, right?

PM me tomorrow, ill get some $$$ on the way :)

Halogrinder

05-06-2008, 11:59 AM

SUCK. i need to clock my chevy 205. what does everyone use :confused:

upnover_yj

05-06-2008, 09:38 PM

AX-15 to D300, I will take one, PM on how to pay and ship. 80228

mobs

06-10-2008, 12:01 PM

pm sent....

Greatlakeoffroad

06-14-2008, 10:05 AM

Rings ready to ship......

scouthead

06-29-2008, 12:53 PM

'88 blazer; sm465/np241. Need a ring to rotate the 241 up (drivers drop241).
This ring have more than one clocking position?
How long for shipping to:
H.B. California?
92646
Where to send Paypal etc...
Thanks,
Matt

mobs

07-01-2008, 01:58 PM

Rings ready to ship......

pm still not answered.. tcase still on ground awaiting......
need a ring...

241 behind 700 in jeep

Greatlakeoffroad

07-01-2008, 03:38 PM

guys give me a call and I can get you taken care of Thanks Shawn 260-387-1428

cyclic17

07-11-2008, 01:49 PM

I am having leaking issues with my ring, so I guess I need the seal extension. Do you know the part number? Do you stock it, or can I get it locally (in the interest of saving time...)?

This is for a T-5 to Dana300 ring.

I also sent an email and left a voicemail----what's up?

Greatlakeoffroad

07-11-2008, 03:05 PM

Chicago Rawhide Speedi Sleeve p/n 99193 I do not stock them however there are usually dealers local to you where you can pick them up for around $10 Nine out of 10 applications do not require them this is the reason I do not include them w/ our kits. Thanks Shawn

cyclic17

07-13-2008, 03:05 PM

Perfect---thanks for the info!

Greatlakeoffroad

07-18-2008, 05:40 PM

In stock and waiting for orders guys!

Greatlakeoffroad

07-31-2008, 12:56 PM

bump to the top

Greatlakeoffroad

08-04-2008, 04:06 PM

thanks for the orders guys!

Greatlakeoffroad

08-06-2008, 06:53 AM

$61 delivered

Greatlakeoffroad

08-12-2008, 07:34 AM

bump

cj5 buggy

08-15-2008, 03:22 AM

th350 mated to a Jeep 300... shipped to 30629?

thanks,

Greatlakeoffroad

08-15-2008, 09:22 AM

$61 call 260-387-1428 to order. Thanks Shawn

th350 mated to a Jeep 300... shipped to 30629?

thanks,

Greatlakeoffroad

08-19-2008, 05:48 AM

NP205 version due out shortly........

Greatlakeoffroad

08-25-2008, 12:36 PM

ttt

Greatlakeoffroad

09-07-2008, 07:22 PM

Yes we are still building these for that same low price. Some things just never change.

Greatlakeoffroad

09-13-2008, 02:21 PM

These still fit! Let us know what your application is and we can build to drop or lift that stock case! Thanks Shawn

Greatlakeoffroad

09-23-2008, 08:09 AM

bump

DrewDog

09-28-2008, 01:43 AM

999 auto to a np231, from everything I've read this will work. True?........Drew

Greatlakeoffroad

09-28-2008, 07:15 AM

I see no issues, I think I also jsut responded to one of your e-mails. Thanks Shawn

999 auto to a np231, from everything I've read this will work. True?........Drew

DrewDog

09-28-2008, 09:59 AM

I see no issues, I think I also jsut responded to one of your e-mails. Thanks Shawn

I'll take one! Thanks Shawn, email send.......Drew

RockReadyXJ

09-28-2008, 04:25 PM

I'll take one! Thanks Shawn, email send.......Drew

Cheater i was just about to send you this info!

DrewDog

09-28-2008, 05:27 PM

Cheater i was just about to send you this info!

Yep found Shawn after searching on the internet for 5 plus hours! Looking forward to installing this ring!......Drew

Greatlakeoffroad

09-28-2008, 06:36 PM

Thanks guys for the opportunity to serve you. Shawn

turtlefast

09-29-2008, 05:17 PM

Do I need any other adapters to bolt the 300 to the ax-15 besides this clocking ring?

Thanks Nick

Greatlakeoffroad

09-29-2008, 05:38 PM

sawzall, I believe you shaft is too long by approx 3/4" We just cut em and file the splines on the end clean. The other option is to make another 3/4" wide spacer. Thanks Shawn

Do I need any other adapters to bolt the 300 to the ax-15 besides this clocking ring?

Thanks Nick

scouthead

09-30-2008, 06:19 PM

Want to get that output on the 241 higher, so just tell me where to paypal, and when I can get my hands on one of these bad boys.
Hey looky there... paypal payment link about an inch above this post...

These in stock? and how long to So Cal?

Greatlakeoffroad

09-30-2008, 06:29 PM

In stock and 2-3 day ship time via USPS flat rate envelope. Let me know. Thanks Shawn

Want to get that output on the 241 higher, so just tell me where to paypal, and when I can get my hands on one of these bad boys.
Hey looky there... paypal payment link about an inch above this post...

These in stock? and how long to So Cal?

scouthead

10-03-2008, 10:00 AM

Paypal payment sent. Hope everything works properly. Looking forward to getting my hands on one of these.

Greatlakeoffroad

10-06-2008, 11:01 AM

We're on it! Thanks for the order. Shawn

Paypal payment sent. Hope everything works properly. Looking forward to getting my hands on one of these.

Greatlakeoffroad

10-13-2008, 01:10 PM

Shipping these daily!

Greatlakeoffroad

10-15-2008, 08:02 AM

Shipping quite a few of these daily. Thanks Shawn

matts88yj

10-15-2008, 08:12 AM

Dana 300 clocking ring to NV3550 trans shipped to 17512. Didn't know if you were still doing the flat rate shipping or not. Thank you!

Greatlakeoffroad

10-15-2008, 08:26 AM

Price is as posted $61.00 delivered flat rate. Thanks Shawn

Dana 300 clocking ring to NV3550 trans shipped to 17512. Didn't know if you were still doing the flat rate shipping or not. Thank you!

scouthead

10-18-2008, 12:39 AM

arrived today... looking forward to installing in the morning. Thanks!

Greatlakeoffroad

10-18-2008, 12:28 PM

We sold quite a few of these recently, everyone must be rotating a case! Thanks Shawn

4x4 BurB

10-21-2008, 01:17 PM

Will this clock up an np208 drivers drop t-case?
From the pictures it looks like maybe not.

CrawfishStu

10-21-2008, 01:47 PM

Need a clocking ring for a 46RH to NP241OR shipped to 21217

Greatlakeoffroad

10-21-2008, 04:49 PM

Yes it will. When ordering just tell us what you need. Thanks Shawn

Will this clock up an np208 drivers drop t-case?
From the pictures it looks like maybe not.

Greatlakeoffroad

10-21-2008, 04:49 PM

Same price for everyone $61.00 delivered. Thanks Shawn

Need a clocking ring for a 46RH to NP241OR shipped to 21217

DWitcher

10-21-2008, 09:06 PM

Payment sent. I need one for a pass drop. Thanks.

Greatlakeoffroad

10-22-2008, 07:34 AM

Thanks for the order. Shawn

Haggar

10-24-2008, 10:02 AM

I need to get one for between my SM465 and Dana 300. Can you shoot me the order info?

Thanks!

Greatlakeoffroad

10-24-2008, 01:58 PM

$61.00 delivered info is in the SIG, I also PM'ed this to you. Thanks Shawn

I need to get one for between my SM465 and Dana 300. Can you shoot me the order info?

Thanks!

dragnz24

10-29-2008, 10:13 AM

Will this clocking ring work with the NP231 and AW4?

Greatlakeoffroad

10-29-2008, 10:57 AM

If this was an original combo there should not be an issue. If you are adapting some research will need to be done. Thanks Shawn

Will this clocking ring work with the NP231 and AW4?

Greatlakeoffroad

11-04-2008, 12:11 PM

ttt

ColdJeep

11-05-2008, 04:29 PM

Got mine installed last week! Great product for a killer price. Thanks again!

Greatlakeoffroad

11-08-2008, 02:25 PM

Thanks for the props! Shawn

Got mine installed last week! Great product for a killer price. Thanks again!

Greatlakeoffroad

11-13-2008, 07:13 AM

ttt

Greatlakeoffroad

11-17-2008, 12:01 PM

bump

Greatlakeoffroad

11-20-2008, 09:58 AM