Yeah I'm a newbie (as far as post count) so bring it if you must. . .

Lurking on the board for 6+months. For those that have the jcwhitney hd CJ springs on all four corners-They still working as well as anticipated. Any problems yet, ie. sagging, too stiff, etc. Thought I would check before I ordered.

Thanks:smokin:

I don't run the CJ springs but the springs I got from them are working great.

i run the jc whitney 7leaf hd springs for the rear of a cj at all 4 corners and they have been great. they flex good and don't sag like other springs i have used in the past.

They work good I haven't had any complaints yet. I sell the same ones.

Originally posted by high5
i run the jc whitney 7leaf hd springs for the rear of a cj at all 4 corners and they have been great. they flex good and don't sag like other springs i have used in the past.

Did you leave the flat leaf on the pack or remove it?

i took the overload leaf out in the begining but the front springs were wrapping a bit so i put them back in the front springs. i run an anti wrap bar in the rear so i didn't need to run them in the rear.

Knorr has been running them up front for a few years...60, and 38" SX's, and a heavy right foot, seem to work good.