Shagnaz2
10-25-2004, 08:12 AM
I ended up doing two pulls on the a Mustang dyno Saturday.
The first run was to get a feel for what I can run 4th gear to.
Second run went from 30mph in 4th to 65mph.
The CTD put out 302 hp and 896 lbs. of torque :smokin: .
I had the Bully Box at 50%. I still have 13% to go.
Pretty happy with the #'s and thought I would share.
Mine goal is to get the hp to @ 500 and torque way past 1000.
Twin turbo set up...maybe?
We'll see :smokin:
fj40charles
10-25-2004, 11:48 AM
Not much HP for the torque numbers. I think a dynojet is a better dyno to use. I'm sure it will produce different numbers.
Shagnaz2
10-25-2004, 03:22 PM
Was told that the Mustang dyno is more accurate. I will be putting the truck on a Dyno Jet soon. Will post the results.
Po' riggity
10-25-2004, 07:39 PM
Nice Job dude.. I have the itch to BOMB my truck, but know I shouldnt.. lol..
Scott
92redyj
10-25-2004, 09:58 PM
what year truck is this? and what other mods have been done.
Shagnaz2
10-26-2004, 04:25 AM
Everything is in my sig.
But here it is
'99 Dodge 2500 4x4 5spd Cummins LB Quad Cab(Tow Rig), AFE filter, MagnaFlow 4" exhaust, BullyDog BullyBox, BullyDog big fuel kit.
rocraven
11-03-2004, 12:33 AM
04 CR Cummins with only a module. 485hp/1100ftlbs. But the CR does flow alot better with the turbo on the down side of the manifold. My 02 would get hot in the stock configuration. :mad3:
Shagnaz2
11-03-2004, 12:42 PM
What module are you using? The fella that owns a performance diesel shop has a new dodge CTD and is getting close to 500 hp with @1000 lb torque. He has injectors,bigger turbo, module, and TST tranny. So, what are you running to get those numbers?
Whiplash
11-03-2004, 03:07 PM
What module are you using? The fella that owns a performance diesel shop has a new dodge CTD and is getting close to 500 hp with @1000 lb torque. He has injectors,bigger turbo, module, and TST tranny. So, what are you running to get those numbers?
I'd say a crack pipe. :D