i'm parting out a cruiser. not much left.

60/40 front seats, need to be redone GONE
driver side rear seat (long), needs to be redone FREE
stock roll bar FREE
rear swing out lower tailgate doors, driver good, pass rusty $50
upper tailgate $25
complete doors, ok shape driver has a dent $50
radiator mount FREE
stock steering gear GONE
complete front axle GONE
hard top sides GONE

what else you looking for? frame is cut in half, no title,hardtop lid is gone, tub wasted, some dash and t-case linkage is there.............

will not ship, but might be able to bring to surf-n-turf for some gas $s. can post pics. :)

Georg, I could use the rear lift door if the handles are in good shape. Also the H/T sides if there better than mine.

Georg,
what do the front framehorns look like? my 45 pickup has been in an accident and the frame horns from the front crossmember forward are obviously straightened(marginally at best from being bent at one time...

mark.
the handles are busted. but besides that it's in good shape. the sides are cool. i'll set that stuff aside for you. FREE!!!!!!!! cause i've lost track of how many times you've hooked me up bro!!!!! :D

brett, the frame horns are good. i can cut the frame whereever you want and send it down with the 45. another freebie.

figure i got lots of "cruiser karma" to repay since i won that winch! :flipoff2:

a couple more parts:

steering column with linkage FREE
gas tank straps FREE
i do have a bunch of other knick-knack stuff off a 66 fj40 also. just ask, you never know.

here's a pic of what's left on "her":

Thanks bro! My door is cool too, just the "T" handle is fawked....so dont save the door for me. But the h/t sides would be cool... as mine are munched and hacked out in certain spots along the rail that mounts to the top of the tub.
Im cruisin over to the shop in the am...I'll grab that stuff for yah.


So is that the donor for the "Gruggy" buildup? :grinpimp:

How bad is the dent in the drivers door? I will probly take them. Do the window regs work?

So is that the donor for the "Gruggy" buildup? :grinpimp:

i was originally thinking it would be, but the tub is too fawked up in the front. so i cut some pieces off it and i'll keep looking for another one. something will come along.

i'll bring the sides down on wednesday. :)

How bad is the dent in the drivers door? I will probly take them. Do the window regs work?

i'll take some pics tomorrow and will check the regulators. i know one of the vent windows is not attached at the upper hinge, not sure what's up. :(

Are the horn button, horn button retainer, horn relay, turn signal flasher and hazard flasher available?

Do you have a resistor for a heater blower motor that will work on a 77?

Are you going to be aroung monday? because my dad is passing threw there.

i'll go out there in a minute and check on this stuff. got a nasty cold/sore throat so give me a little time.

Box is full georg! Didn't Mark, 65swb45, want steering boxes from this era? More ballast for the Taco!

Georg,
Put me in line for doors if goldenarrow doesn't pick them up...

Get better :D
manny 72fj40

just took a closer look at the doors. :(

the driver door is cool, but the regulator is stuck and i did'nt wanna force it.
some rust starting to show on the bottom edge.

passenger door has a dent by the bottom hinge and lotsa rust, but the regulator works.

these would porbably be good candidates for half doors, might have to be reskinned which is easy.

price is negotiable!
goldenarrow. you got dibs but a friend of mine wants them also so let me know asap.

couple of pics:

dibs on doors as follows:

goldenarrow
ratfj40
mr manny

pm box cleaned out :flipoff2:

couple more pics.

all the heater stuff is going to cruiserbrett, promised it to him a while ago. rest is a go.

george
do you have the kickvents? i need one for the pass side

How are the windshield bolt brackets, the brackets mounted on the dash to hold the windshield up?

How is the dash itself?

How much $$ ?

Thanks,
Phil

george
do you have the kickvents? i need one for the pass side

i'll pull it off for you. another freebie!!!!! :D

How are the windshield bolt brackets, the brackets mounted on the dash to hold the windshield up?

How is the dash itself?

How much $$ ?

Thanks,
Phil

dash has a hole cut for an old school stereo, besides that, it's pretty clean. probably the best part on this rig. the windschield brackets are good. want it? come up here tomorrow or early today and cut it off.
another freebie!!! :)
209-955-1217 georg

dash pics:

Ya got the front bib/bezel off that thang?

sorry kowpie, all the front sheetmetal was already gone when i got that cruiser. anything else you need? i can bring it down to pismo for ya!

Are the horn button, horn button retainer, horn relay, turn signal flasher and hazard flasher available?


marc just picked up all that stuff for you and dropped off the seat for brett! :D

Do you by any chance have the two little defroster guides that direct the heat at the windshield? Thanks. :)

Edit:never mind, 68 style is different than 65.

anything else you need?

Nosir. But thanks anyway.

Do you by any chance have the two little defroster guides that direct the heat at the windshield? Thanks. :)

Edit:never mind, 68 style is different than 65.

sorry, cruiserbrett already scored the ones off the 66. :(

Damn, no worries. Thanks :)

Hows the cross member right behind the trannie?

Dave

Hey Georg,
That thing looks better than ever!...nice job :)

Hey Georg,
That thing looks better than ever!...nice job :)

not sure. i'm gonna cut the body off it tomorrow and will get back to you.

Hey Georg,
That thing looks better than ever!...nice job :)

hey there, newbie fawker! :flipoff2:
glad you're on the pbb now alex. lotsa local cruiserheads on here as well. :)


need any parts?! :laughing: :laughing: :laughing:

I will take the doors and see if I cant make a god set out of them and the set I already have.

Were you going to be around monday or should we try to figure something elce out.

thanks patrick.

hey pat.
i'll be home all day today, but gotta go to a funeral monday.

you can come up here and pick them up if you want, even if i'm not here. call me today. 209-955-1217

How are the windshield bolt brackets, the brackets mounted on the dash to hold the windshield up?

How is the dash itself?

How much $$ ?

Thanks,
Phil

would this work?! :D
i might be able to bring the dash to hayward on wednesday if that's easier for you.

dug up another goodie. not sure if this is for a cruiser, but it was laying in the back and the filler part was installed in the tub.

auxillary tank anybody?! $20

more stuff!!!
anybody need a trans tunnel?! uncut, but a couple of rust spots (holes):

Hows the cross member right behind the trannie?

Dave

it's in good shape and the early style to boot. that way you can run the offset or centered rearend.

more stuff!!!
anybody need a trans tunnel?! uncut, but a couple of rust spots (holes):
Thanks for the Tunnel G...Feels good cutting shit up huh bud :D
...guess I'll be able to get my shit together sooner. :grinpimp:

when your finished with the tub i could use the rear half. i need the inner fenders for my 67... mine are rusted on top.. . did you get the axle delivered for flatty? never heard from you guys.. got home last night at midnight.. long drive... let me know on the tub how much.. thanks, chris :goofball:

Hey Georg,
Im sure I'll be able to come up with some lame ass newbie questions soon :D
I need parts...unfortunatly just not any that were left on that cream puff. Glad to see this thing will provide some life for a few other cruisers. Looks like you got a full load to Pismo...
Alex

when your finished with the tub i could use the rear half. i need the inner fenders for my 67... mine are rusted on top.. . did you get the axle delivered for flatty? never heard from you guys.. got home last night at midnight.. long drive... let me know on the tub how much.. thanks, chris :goofball:

sorry bud, the tub was a rust buckett and is now in many pieces.
and the fenderwells were rusted thru at the top as well.

i'm dropping the axle of to flatty on wednesday. thanks again for the offer.

man it felt great chopping something up! :D


going, going, gone!

Georg, I see a fan shroud in the pic. Can I put dibs on it for LCJ? That 4 blade fan he's got in the LV REALLY SCARES ME! :eek:

i'll bring it to SNT!

Turns out that my dad will have a full vhicle comeing back from reno so he cant pick them up. I still want the doors but I wouldent be able to make it up there for a cupple of weeks. so if you wanted to sell them to sombody elce I understand. give me a call (559) 260-0533

thanks patrick.

would this work?! :D
i might be able to bring the dash to hayward on wednesday if that's easier for you.

SWEEEEEEET!

That'll be PERFECT:)

Hayward might work if I can pick it from there on Sat. (?)

Otherwise, I'm planning a road trip to Sunny Stockton on 11/13 or 11/14.

Thanks again Georg. The Cruiser Gods are smiling on you.

Phil

hey phil.
nobody at my work on saturdays, so it's probably better if you come up in 10 days and get it.

Hey Georg.. Anyone claim the steering wheel? Mine makes crunchy noises when I turn on my Shorty 45. :eek: . I"m guessing I could get someone at Surf n turf to ship it for me :angel: , Cause I know you said in your first post.. No shipping.. Lemme know if it's ok, and what ya need fer it if available.. Thanks! Erik..

sorry bud, steering wheel went to the owyhee jackass. i would have shipped it to you, just not into shipping big heavy crap! :(

No worries.. I'll keep my eyes open or fix the one I've got someday.. Thanks tho! Have fun at Surf n Turf.. Watch out for Kowboy! there's a reason he feeds shiner to the LeftCoasters..

George, if no one claims the doors, I will take them. I need to make a set of 1/2 doors for my cruiser.

Thanks
Dima

do you have i need the 40 i got has no guts in :cool: it

George, if no one claims the doors, I will take them. I need to make a set of 1/2 doors for my cruiser.

Thanks
Dima

craaaaap. i've been looking for doors too long to flake on this deal. dima doesn't
get them for some reason.. please let me know

craaaaap. i've been looking for doors too long to flake on this deal. dima doesn't
get them for some reason.. please let me know

Refer to post #17.
Get in line fawker!

if goldenarrow does not pick em up on saturday, ratfj40 aka kent has dibs. then flatty, and my little biatch blinky billy is last in line. :flipoff2:

if goldenarrow does not pick em up on saturday, ratfj40 aka kent has dibs. then flatty, and my little biatch blinky billy is last in line. :flipoff2:

That'd be Rat70FJ, Horhay. But my truck IS a ratfj40 :D What happened to MrManny being in line behind me? That'd put Tommy even further back :p

Kent

ahh fack! no need to remind him :flipoff2:

ahh fack! no need to remind him :flipoff2:

i'll keep my eyes open for you dude. i know of a 66 cruiser for sale right now, but it's in pieces and needs a lot to get back on the road, so if i buy it i'll let you know. :smokin:

Georg, you have any gas tank straps? [arnold voice/on] If not, no big deal, I make my own damn tank straps. [arnold voice/off]

And Kent, your rig is a Mouse-fj40....cause you aint got no big block shun!! :flipoff2:

you bet, i'll drop them off next week. remind me on tuesday. i dropped the pedals off for you tonite. gotta get that bellhousing from you.

And Kent, your rig is a Mouse-fj40....cause you aint got no big block shun!! :flipoff2:

If we're talking motor names now, it's probably more like a molefj40 or maybe even a sloth! My 2F just isn't quick enough to to be called a mouse. Maybe one of these days I'll add a couple cylinders. The truck itself is definately a rat, however!

more like a gerbil! :flipoff2:

more like a gerbil! :flipoff2:

Now you're gettin' outta hand :flipoff2:

what? did you say your gerbil fell out of your hand? better catch that little bastard! :flipoff2:

why do all these threads reach a certain point and just head south after that?! :shaking:

Yea maybe we otta let this one fizzle out before I talk about you borrowing my gerbil....Oops, I let it outta the bag