what flywheel do I need (157? or do they make a 164? tooth) and starter. I know I need the 50oz imbalance on it. I have a 164 tooth starter bolted up to my C4 right now, will that work on the standard bellhousing with a 164 tooth flywheel? I am also looking for a bellhousing for the np435 if you happen to have one kicking around. :D

Not sure on the tooth count, but I can tell you the starter for your C4 won't work with an NP435. I made this same mistake usin' the C6 starter. The nose if a different length and not only ground slightly when I first cranked it, but it ate off 3 teeth of the brand new Flywheel. :mad3: Although I have no one to blame but myself.

Just please don't make this same mistake as it can be costly and timely. :shaking:

Thank you for the heads up. After looking through my PAW and Summit catalog's, most of the flywheel's they have are for a 157 tooth starter, which would have prevented me from using it anyway. Oh well, something else I can sell off of the current setup. :rolleyes: