PDA

View Full Version : Fj80 Chromoly Birfields


Longfield
11-09-2004, 09:36 PM
OK GUYS
We are coming out with FJ80 4340 chromoly LONGFIELDS these will be the same as our new toyota chromoly birfs the inner cage an race will be heavyer and longer also. They will be out in about 6 weeks, they will run about $315.00ea. :)

houlster
11-10-2004, 09:11 AM
'91-'92 or '93-up ? Or both?

Longfield
11-11-2004, 10:04 AM
Which version and with or without ABS? If without, will it take the press fit ring?


Yes it will be the style that takes the ABS ring it will be the longer stub shaft one. It will fit all. :)

64rovr
11-11-2004, 04:43 PM
Comparison in strength to the mini truck birfs?

Longfield
11-11-2004, 07:40 PM
Comparison in strength to the mini truck birfs?


Same size stub shaft 30 spline much bigger bell an race i would think much stronger. :)

suspect
11-11-2004, 09:03 PM
I have 2 fj-80 birfs w/ abs ring if you're looking for cores. I could use a couple things you sell.........so how 'bout a trade?













Gotta try. :D I have the inners too :grinpimp:

McSoo
11-11-2004, 11:35 PM
I have the ones without the ABS ring (a 91 axle). These will work right? :) Or do I need to go out an find an ABS ring? You da man Bobby. Expect my $$$ in 6 weeks. :)

houlster
11-12-2004, 09:50 AM
I have the ones without the ABS ring (a 91 axle). These will work right? :) Or do I need to go out an find an ABS ring? You da man Bobby. Expect my $$$ in 6 weeks. :)


You only need the ABS ring if you have, and want to keep the ABS. The longer birf will work in an earlier axle. You can get the thicker, '93-up drive flanges to work with them. You can still use lockouts too, but without the c-clip inside the lockout.

--Dan

Longfield
12-01-2004, 09:14 AM
[QUOTE=houlster]You only need the ABS ring if you have, and want to keep the ABS. The longer birf will work in an earlier axle. You can get the thicker, '93-up drive flanges to work with them. You can still use lockouts too, but without the c-clip inside the lockout.

Thanks Houlster the FJ80 s are about 2 weeks away :D

Overlord
12-17-2004, 10:53 PM
What is the inner star and cage made from? 300M or 4340?

Longfield
12-18-2004, 05:46 PM
What is the inner star and cage made from? 300M or 4340?


Yes 300M. :) :)

Action Jackson
01-03-2005, 09:55 PM
Are these ready yet?

RUFF
01-04-2005, 02:41 AM
Is this Birf only or inner axle as well? You dont seam to have mentioned the inner axles. And if they are inner axle as well will it have the 30 spline star?

Longfield
01-05-2005, 05:17 PM
Chromoly birf only it will fit your inner axle. Sorry for the delay will be here the 1-17-05. :D

Action Jackson
01-12-2005, 09:23 PM
ttt. You guys gotta make the inners too :)

Action Jackson
01-21-2005, 09:26 PM
Chromoly birf only it will fit your inner axle. Sorry for the delay will be here the 1-17-05. :D
I'm ready to order a set. Tell me they are ready??

Longfield
01-22-2005, 10:18 PM
They will hopeful be here 1-28-05 This is what we were told by our supplyer again. SORRY FOR THE DELAY. :)