I posted this in the geraral section and didn't get any answer?
Didn't even get flamed or insulted or nothing :confused:
I can't beleive I'm breaking new ground her...
Go ahead and flame if you must, I read endless pages of meaningless drivvle during a search. :mad3:

I've got a gm dana 44 eight lug front with high steer knuckles already drilled and tapped. Don't have the arms yet so I cant see if a standard hysteer arm will work with the hummer wheels. Anyone make a set or have some measurments to build a set or any other useful infomation appeceated. Pictures would help...

stock backspacing is 7"
another option is to cut the centers out and weld in a new one with whatever
backspacing you want.

check the vendor section for centers

Did you read my question? :shaking:

Let me make it a little simpler.

Does anyone make high steer arms that will clear hummer wheels?

You suck at search! :flipoff2:

http://www.pirate4x4.com/forum/showthread.php?t=193157


http://www.pirate4x4.com/forum/attachment.php?attachmentid=106387&stc=1

DOH!
http://www.justinternationals.org/erickincel.htm

You know I hate it when you show me up! :flipoff2:

That was what I was looking for though, I've PM'ed that guy but don't like doing business with, well just, whoever. Never heard anyone say they had a set or anything. The thread just went dead!

I actually have the set of wheels off that Scout linked to above on the JIH site, he got the newer set of 16 bolt wheels. I don't like what he ended up withfor arms, they are shakerbuilt arms, cut welded, fit inside the wheels now and he swears the ackerman angle is correct and drives great, it's his daily driver. But they look so short and his tires wear bad...

http://www.justinternationals.org/members/erickincel/rearside.jpg