Is it problematic? Do you think I could get them made locally?

do you have 2 or 3 inch wheel spacers that will fit a toyota?

Is it problematic? Do you think I could get them made locally?

It's not economical.

quote to get a pair of 1.5 5 on 4.5 to 5 on 5.5 adapters and a pair of 1.5 5 on5.5 spacers to 29601

Two 2" 5 on 5.5 shipped to Winnipeg, Canada?

Could I get a quote for two 1.5" spacers, 6 on 5.5 with 1/2" studs pressed in?

Could I get a quote for two 1.5" spacers, 6 on 5.5 with 1/2" studs pressed in?

not making these or just not on the board lately?

Thanks for the orders. :)

How about 5-4.5 to 8-6.5 shipped to 43551?

Sorry, we don't do 5 to 8 lug or 8 to 5 lug anymore.:(

Is it problematic? Do you think I could get them made locally?

It's not economical.

It's too bad you stopped making these. I was needing a set also.

Back to the search.

I need to replace one of the studs that the thread got screwed up on

1/2"x20 standard thread grade 8 stud

I'll take a couple so I have a spare

can you just sell me the stud??

I need to replace one of the studs that the thread got screwed up on

1/2"x20 standard thread grade 8 stud

I'll take a couple so I have a spare

can you just sell me the stud??

You bet. Give us a call.

Do you still make the 5 on 5.5 to 6 on 5.5 in 1.5" thick?

How much shipped to 30458?

Nevermind... I read some more of the thread and answered my own question!

do you make an adapter that goes from 8 lug to 6.

Need a price on 5.

5 on 4.5 to 5 on 5. - 1.5" spacer

Alf

Looking for a set of 5x4.5 to 5x5.5. Front I need 1.5" and rears I need 2". Shipped to 46902

PM sent.

Thanks

Looking for a 5 on 5.5

to 8 on 6.5 alum. 2"spacer/adapter

can you help with this?

is there even a adapter like this available?

thanks!

Looking for a set of 5x4.5 to 5x5.5. Front I need 1.5" and rears I need 2". Shipped to 46902

We currently stock 1.25"

thanks

Looking for a 5 on 5.5

to 8 on 6.5 alum. 2"spacer/adapter

can you help with this?

is there even a adapter like this available?

thanks!

Sorry, we do not do 5 to 8 lug.

thanks

well obviously there is a customer demand for these spacers.... if u got enough orders in advance would u consider making 50 sets real quick? :smokin:

6 lug chevy to 8 lug on 6.5 shipped to 41701 also do you make 6 lug to 5 on 4.5? thanks Chris H

Guys,
We do not do 5 to 8 or vice versa or 6 to 8 or vice versa.:smokin:

thanks

well obviously there is a customer demand for these spacers.... if u got enough orders in advance would u consider making 50 sets real quick? :smokin:

???????????????/

???????????????/

We have tried. At this point, we do not do them anymore. :)

looking for one pair of adapters, 5x5.5 to 5x4.5 in 1.5" to 34232. thanks

Wrangler 5 on 4.5 with 1/2-20 studs
1.25" 1 pair
1.5" 1 pair
ship to 83646

Thanks

price for a pair of 6 on 5.5 to 5 on 4.5 shipped to 19335

price on 5 on 4.5 to 6 lug toyota.....if you got em to 28086 i got some nice bead locks for my taco i want to run on the jeep

price for 1 set 8 lug chevy pattern to 5 on 4.5

Do you have 5 on 5.5 (axle) to 8 on 6.5 (wheel) or can you get some? I am doing tons on my Scrambler around December and I dont want to have to buy wheels twice. Zip is 76053.
Clay

price on (2) 5 on 5.5 pattern 1.5" spacers with 9/16 studs shipped to 92082.

Thanks, Bill

Wrangler 5 on 4.5 with 1/2-20 studs
1.25" 1 pair
1.5" 1 pair
ship to 83646

Thanks

All the prices on the first page are current. :D

thanks

I need a CJ axle to tj wheel adapter/spacer... what do you have?

do you have any to go from a 5 on 5.5 axle to a 8 on 6.5 wheel?

I got the shipment today and everything was as promissed, vendors like this one makes pirate forum what it is. im 100% happy

I got the shipment today and everything was as promissed, vendors like this one makes pirate forum what it is. im 100% happy


Thank you. :)

can u make a set of toyota 5/8" wheel spacers without studs or holes drilled?

looking for a pair of 5 on 5.5 1 and 1 eight and a pair of 5 on 5.5 2 inch
need to be cheap
cheapest price to to 01027

I need a set(4) of 5x5.5 hub to 5x4.5 wheel, shipped via USPS Priority mail in a ~$10 "military flat rate box" to an FPO. Is that possible?

looking for a pair of 5 on 5.5 1 and 1 eight and a pair of 5 on 5.5 2 inch
need to be cheap
cheapest price to to 01027

NCJ7,

All the prices in the first page are current.

thanks

Thanks for the orders. :D

Two sets 5 on 5 1/2 1.5" thick shipped to 92071

Two sets 5 on 5 1/2 1.5" thick shipped to 92071

All the prices in the first page are current.

thanks

two sets wrangler to 5 on 5 1/2 shipped to 32164
can you do different thicknesses?

two sets wrangler to 5 on 5 1/2 shipped to 32164
can you do different thicknesses?

Take a look at the first page. We stock 1.25".:D

thanks

I see its been asked and being a machiniest its possable ,but the Question is the same doyou make a 5x5.5 axle to 8x6.5 wheel adaptors

2'' thick

price on 4 2inch 8x6.5 spacers shipped to 89521

QTY 4- 6on5.5- 2" WIDE FOR AN 81 YOTA 4X4 SHIPPED TO 89117

PM sent on 1.25" 5x4.5 spacers..
Scott

I see its been asked and being a machiniest its possable ,but the Question is the same doyou make a 5x5.5 axle to 8x6.5 wheel adaptors

Sorry, we do not.

price on 4 2inch 8x6.5 spacers shipped to 89521

All first page pricing is current. :D

Thanks for the orders.:smokin:

Whats the price on either 8 lug dodge to 5 on 4.5, or 5 on 5.5 to 5 on 5.45 shipped to 84655

You have a PM and a voicemail at the shop.
Thanks, Sean

Thanks for the orders. :D

How bout a price on a 2" spacer 6 on 5.5" shipped to 72764(buisiness)

Thanks,

Tim

is there an adapter from a 5 on 5.5 axle to a 8 on 6.5 wheel?
if it is available can you pm me a cost for a set of 4 shipped to 48030
thx

Thanks for the orders.:D

Thanks for the orders.:smokin:

Do you have a 5 x 4.5 to a 6 x 5.5 adapter in 1.5" or 2"? If so how much to 95008?

Thanks,
Fred R.

looking for 8 on 6.5 wheel spacers to even out the tires on an 03 chev 2500hd, im thinking 1.5 thick.......a pair shipped to 17931.........thanks

looking for 8 on 6.5 wheel spacers to even out the tires on an 03 chev 2500hd, im thinking 1.5 thick.......a pair shipped to 17931.........thanks

All prices on the first page are current. :smokin:

thanks

is there an adapter from a 5 on 5.5 axle to a 8 on 6.5 wheel?
if it is available can you pm me a cost for a set of 4 shipped to 48030
thx

im assuming this is not available.

Sorry, we do not do 5 to 8, 8 to 5, 6 to 8, 8 to 6, etc...

thanks

got any adapters to go 5x5.5 to 6x5.5?

Do you have a 5 x 4.5 to a 6 x 5.5 adapter in 1.5" or 2"? If so how much to 95008?

Thanks,
Fred R.

Is this available? I saw in the first page that someone also asked the same question.

Thanks,
Fred R.

Sorry, we do not do 6 to 5 or 5 to 6.

I need 5 on 5.5 to 5 on 4.5, 2" spacer. also need to know the center bore diameter.
Thanks

Thanks for the orders.:D

Thanks for the orders.:smokin:

8x170 to 8x170 1.5inches or 2inches... set of 4 delivered to 08349

pm sent.

Thanks for the orders.:D

Thanks for the orders :D

Thanks for the orders.:smokin:

Thanks for the orders. :smokin:

Need some thin as possible to go from 8 on 6.5 to new metric superduty pattern.2 pairs. Shipped to 26582

Thanks for the orders.:)

Do you have 5 on 4.5 to 8 on 6.5" adapters, looking for 2" thick
Price shipped to 37312?

i really need 5x4.5 to 8x6.5 in a hurry is it possible for you to make these thanks and for a quote for four of them to Helena, Montana 59602

THANKS SO MUCH

Hi,
I need to quote 4 set ( 8pcs) of 1.5" spacers in 5 x 5.5 for suzuki samurai shipped to Chile (ZIP 8420000 ).
Thx a lot,
gonzalo

Thanks for the orders. :D

I need to quote a pair of adapters for 5x5.5" to 8x6.5" with 1.5" spacing for a ford 9" rear shipped to Texas (76126)

Thanks for the orders. :smokin:

How much for an 8 lug to 6 lug adapter? About 1.5" thick. Not sure on measurments. Im putting an 88 1 ton 14FF on my 96 half ton chevy and wanted to keep the wheels I have now.

How much for 4 wheel spacers 1.25 wide for a 1998 jeep tj shipped to Edmonton Alberta Canada.

How much for 4 wheel spacers 1.25 wide for a 1998 jeep tj shipped to Edmonton Alberta Canada.

What is your postal code?

Do you have 6 on 5 1/2 x 2" spacer for toyota? zip 59715

Thanks

Do have 5 on 5.5 to 5 on 4.5 about 1.5" thick
zip 74604

Thanks for the orders. :)

need to go from 8 on 6.5 rim to a 6 on 5.5 axle need quote 4 shipped to 62451

need to go from 8 on 6.5 rim to a 6 on 5.5 axle need quote 4 shipped to 62451

Sorry, we do not do 8 to 6 lug.

I have Ford half ton axles. 5x5.5 and was hoping to get adapters to an 8x6.5 wheel. Shipped to 35055 business or residential.

I need quote for 2-inch spacer for Chevy 8X6.5 bolt pattern, to my door in Phoenix. I have two options to install spacers:
1. Between the rotor and the dually adapter - bolts are 1/2 inch
2. At the wheel mounting surface - this option will need a hub-centering lip and 14mm studs/nuts.

It looks like option #1 is the simpler way to go.

Thanks,
Art

i need 4 2" 8 lug to 8 lug spacers shipped to 98908. thanks!

I am looking for an 5 lug 4.5" to 5 lug 5". a set of 4 please

Thanks for the orders. :)

Do you have something that would change a 95 disco 2 to a 5x5.5

Looking for a price on 2 inch wheel spacers for 8 on 6.5 wheel, 2 pairs.

need two 3" wheel spacers for yota shipped to 30567.

What's the thinnest adapters you have for 5x4.5" to 5x5.5"?

Can i get a quote for a pair?

do you make a 2.5" 6 lug toy wheel spacer?

shipped to 95451

if not then 2" spacers

looking for 5 on 4.5 to 5 on 5.5 adapters shipped to 46140. Thanks.

need 4 spacers for rover style 5x6.5 1.5'' or 2'' let me know if you can make them.

need 4 spacers for rover style 5x6.5 1.5'' or 2'' let me know if you can make them.

Sorry, we do not do 5x6.5.

thanks:)

Can you PM me a price (shipped to 81631) for 2- 2" wheel spacers, 5 on 5.5" bolt pattern for both the vehicle and wheel? This is for my 1962 Scout 80.

Thanks for the orders. :D

Thanks for the orders. :smokin:

adapters for late model super duty rims 8x170 to older axles 8x6.5 1.5 wide shipped to 89406

Thanks for the orders. :D

do you have spacers from 5 on 4.5 to 6 on 5.5?

thanks,
-Eric

Thanks for the orders.:grinpimp:

Is there a 5 on 5.5 to 8 on 6.5 adapter? Got a killer deal on some wheels!

Price on 6 on 5.5 to 5 on 5.5 by 1.5-2" thick adapters.

Also 6 on 5.5 to 8 on 6.5 by 1.5-2" thick adapters please.

Shipped to Prince George BC Canada.


Thanks

Price on 6 on 5.5, 1.5 thick shipped to 14886 for 4 wheels

Looking for price on 2" thick 5x4.5 to 5x5.5 adapters if you've got 'em. Shipped to 95401.
thanks

OK, can you make 5 on 4.5 axle side to fit 8 on 6.5 wheel ? I want to run Humvee tires for winter tires on the TJ (44/8.8 with 5 on 4.5 BP).

Thanks

Thanks for the orders. :smokin:

Looking for 2 sets of 1.5" or 2" for stock yj... shipping to 31204

how much for 1.5'' wheel spacers 6 on 5.5 for toyota thank you.?

Stock YJ 5on 4,5 to 5 on 5.5. 4 spacers shipped to 64089.

Thanks

Please PM me a price on a set of 4 5x5.5 to 8x6.5 adapters shipped to 67502

thanks
Brian

Do you have 2.5" wide, 5x5 (JK) to 5x5.5 (CJ)?

Thanks

I need 5 x 5.5 (Scout axle) to 6 x 5.5 (Wagoneer wheels) adaptors 1 or 1.5 inch spacer to 67002....thanks!

Can I get a quote on a pair of 5 x 4.5 to 5 x 5.5 wheel adapters in 1.25" to 95008? If you don't have 1.25" then 1.50".

Thanks,
Fred R.

I'm looking for a pair of 6x5.5" to 5x4.5" wheel adapters shipped to 80906.

Thanks and Merry Christmas!

Lookin for 1 set 2" for cj5 and 1set 1-1/8" shipped 95632

how bout 8 on 6.5 to 6 on 5.5?

No dice on the PM, so I need 4 2 inch spacers with 5x4.5 BP shipped to 48081. Thanks

Swaping in some 1 tons but hate to lose my current beadlocks any chance on 8x6.5 to 5x5.5

hope this isnt a stupid question but i have 5 on 4.5 trailready's and might upgrade to a 5 on 5.5 axle setup. to be able to keep my rims do you make an adapter to go from a 5.5 to a 4.5 lug pattern?

hope this isnt a stupid question but i have 5 on 4.5 trailready's and might upgrade to a 5 on 5.5 axle setup. to be able to keep my rims do you make an adapter to go from a 5.5 to a 4.5 lug pattern?

If its a front axle with a manual locking hub, you might not. Usually the centerbore of the wheel is not large enough to go through a 5x5.5 common locking hub assembly.

thanks

How much for a pair of 2" - 8 on 6.5's converting from 1/2" to 9/16" stud size? Shipped to Canada, postal code T0M 0J0.

Thanks

looking for a pair of 1.25 inch or 1.5 inch spacers that will fit a d60 hub with 9/16 bolts in a 5 on 5.5 bolt pattern front application. shipped to 33134

Can I get a quote on four 2" spacers 5 on 5.5, shipped to 06111
Thanks

1.wheel spacer 1/4" ford 9" 5 on 5 for wheel measuring purposes shipped to 94520. Thanks.

do you have wheel spacers for 8 on170 thicker then 1/2"? Price?

jake

I saw this asked on the first page but your response was a PM ... 5 on 5 1/2 to 8 on 6 1/2 adapters ?

5 x 5.5" -> 6 x 5.5" adapter exisit? If so can it be had in a 2" spacer? Thanks.

I saw this asked on the first page but your response was a PM ... 5 on 5 1/2 to 8 on 6 1/2 adapters ?

Sorry, no 5 to 8 lug or vice versa.

5 x 5.5" -> 6 x 5.5" adapter exisit? If so can it be had in a 2" spacer? Thanks.


Sorry, we do not do the 5 to 6 lug or vice versa.

1.wheel spacer 1/4" ford 9" 5 on 5 for wheel measuring purposes shipped to 94520. Thanks.

What about me?:confused: Do you sell the wheelrite wheel measuring thing?

Thanks for the orders. :D

5 on 5.5 big center bore 1.25" to 39563?

5 on 5.5 big center bore 1.25" to 39563?

All the prices on the first page are current.

thanks

Thanks for the orders.:smokin:

Is there a 5 on 5.5 to 8 on 6.5 adapter? I have a 8 lug front and a 5 lug rear and nice 5 on 5.5 beadlock rims I'd like to use on it. Please advise. Also is there a 8 on 6.5 to 5 on 5.5 adapter, so I can get 8 lug rims to run on these axles ?

Thanks

-- Ben

Do you have an adapter that will go from a 5x5.5 warn hub to a 8x6.5 wheel. Basically I need to buy new wheels (17") and I'm running D44's but I know that in 2 or so years I'll want to change to D60's and just do not want to buy W/E. wheels twice ($$$$)! :shocked:

Thanks,
Randy Wittmer
(720) 747-8854
www.MobileCyclery.com
www.RockDawgs.org


.

Sorry, no 5 to 8 lug or vice versa.

Need 4 8x6.5 to 8x170 shipped to 89406

need 4 5x5.5 (axle) to 5x4.5 (wheel) adapters 1.25 to 2" thick, doesnt matter, shipped to 32578 thanks!

PM Sent

Thank you for the orders. :D

any mog 6x205mm to 8x6.5"

Thanks for the orders.

do you have wheel centric spacers for chevy D60 front?
if so what widths?

do you have wheel centric spacers for chevy D60 front?
if so what widths?

Take a look at the first page. There should be some sizes available for your app.

thanks

Would you quote me two pairs of 5 on 4.5" (1.5" thick)shipped to 97477?

Thx

Would you quote me two pairs of 5 on 4.5" (1.5" thick)shipped to 97477?

Thx

All the prices on the first page are current. :smokin:

thanks

I'm looking for (2) 5x135mm 1.5-2" spacers shipped to 94549. Thanks

I need adapters to go from 6 on 5.5 to 8 on 6.5. No thickness requirements, just whatever is required to make them. Price shipped to 92677, please. Thanks.

I need a set of 5 x 4.5, 2" spacers shipped to 92056. Can I order online (I hate the telephone :D)? Do you accept paypal? Thanks.

Thanks for the orders.:)

OK here is what I need.. I need two adapters that go from 6 lug on 5.5 (Chevy) to 8 lug on 6.5 strongest possible!! to 78613 Thanks!!
Mike

OK here is what I need.. I need two adapters that go from 6 lug on 5.5 (Chevy) to 8 lug on 6.5 strongest possible!! to 78613 Thanks!!
Mike

Mike,
Sorry we do not do 6 to 8 lug or vice versa.

thanks

Do you offer a 5x135 to 8x6.5 adapter? Is a 5 to 8 lug adapter possible?

Do you offer a 5x135 to 8x6.5 adapter? Is a 5 to 8 lug adapter possible?

Sorry we do not do 5 to 8 lug or vice versa.

thanks

PM sent....

Just installed and happy. It's just a JK, but a fun project for me. Thanks and good seller. Now onto skids.

Just installed and happy. It's just a JK, but a fun project for me. Thanks and good seller. Now onto skids.

Thanks for the order. :)

Thanks for the orders.:D

can you do 5 x 4.5 to 6 x 135m?
thanks

can you do 5 x 4.5 to 6 x 135m?
thanks

Sorry, no 5 to 6 lug or vice versa.

5x5.5 to 5x135?

Thanks for the orders.:D

Thanks for the orders. :D

Thanks for the orders. :)

do you make a spacer to use stock H1 wheels on ford F-250 (8x170mm)? I want to be able to use the wheels on both my rigs, 2000 F-250 and chevy C2500 with DRW dana 60 front. Thanks

this thread is worthless with out 6-lug spacers!!!

this thread is worthless with out 6-lug spacers!!!

PM for quote. Include the type of axle or vehicle.

how much for 4 1.5" spacers for 6x5.5 shipped to 30577?

Thanks for the orders. :smokin:

Do you do 2" thick mog axle 6x205 to 6x5.5" chev wheels?

Thanks for the orders. :D

1.5" and 2.0" 8 on 6.5 with 9/16 studs $129.00 per pair
I need two pair to 81435, do you take paypal?

PM sent

price for 2 adapters for mounting my 6 lug wheels on my 14bFF 8 lug on 6.5

Thanks for the orders. :smokin:

I need 4 adaptors 1.25 thick 5 x 4.5 hub ---To--- 5 x 5.5 Wheel

Shipped to 23606

Thanks!!

price for 4, 6 lug toyota 2" spacers!! 95648 ca thanks

Thanks for the orders.:D

Quote on a pair of 6 lug Wagoneer pattern 1.5" shipped to 29540. And can I call to place my order?

Thanks

1.5" and 2.0" 8 on 6.5 with 9/16 studs $129.00 per pair
I need two pair to 81435, do you take paypal?

Got um and they look very good. Thanks man, it was fast.

Need price for a pair of 2.5" and a pair of 3" 8 lug spacers to 75493. Thanks.

Just ordered a set, thanks!:D

Just ordered a set, thanks!:D

Thank you for the order. :smokin:

price for a pair of 2" 5x135mm spacers shipped to 77354

Is the 6061 Aluminum T-6?

They are T-6, order placed! Thanks for the great pricing and friendly service when I called to make the order!

how bout 6x5.5 spacers price 1in and 1.5in shipped to 73441

Are you still running this deal?

2 sets of 1.25" for 06 Jeep Rubicon stock wheels

I think it's 5 on 4.5

Shipped to 89436

Thanks

Thank you for the order. :smokin:

They got here so quick I canceled the order I had with another company and ordered another set from you! :beer:

I need 1 set of 5 x 4.5 , 1.25" spacers for my TJ shipped to 87114, looks like they are 59.00 + 12.50 = 71.50 ,correct? Paypal or call you direct with a cc?

do you make a 5 on 5.5 to 8 on 6.5 ? I have a sweet set of 8 lug recentered beadlocks would like to put on my cj , if you dont make them do you know of anyone who does ?

price on 3'' toyota 6 on 5.5
1 set shipped to 92377

If I order two pairs shiped to california ... that means I have to pay tax and shiping ? can I get a quote including all costs to my door for two pairs 1.5 thick 5x5.5 pattern and also a quote for two pairs of 2 inch thick same bolt pattern shiped to 96142
can I also get a quote without ca tax

I have a temp 8 lug axle setup. Need to go from 8 on 6.5 to
5 on 4.5? as little spacing as posible. 1"? to 85928
TIA:)

Thanks for the orders.

I have a 96 Bronco 5 on 5.5 and I found some 8 lug wheels Ill be running on it. I need adapters to an 8 lug, not sureon exact 8 lug yet. Do you have these? also how deep are they?
They are going on my dtreet driven truck and modern wheels are usually 4.5" BS which will be good cause I need 3.5-3.75 for th Bronco

Thanks for the orders.:D

I have a 95 Bronco with 5 on 5.5, looking for an adapter to go to 8 on 6.5.

how long would it take to get a set of 5 on 4.5 shipped to 41102?

Thanks for the orders.:D

I need a adapter 5 on 5.5 to 8 on 6.5 thanks

Converting ford 9" 5x5.5 to match front 78 hpd60 8x6.5.
Ship to Canada?

Thanks for the orders. :)

Thank you for the orders. :D

any chance of a 1" thick 8x6.5" spacer with 1/2" studs? if so, how much?

Thanks for the orders. :smokin:

Thanks for the orders. :D

pair of 1.5" and a pair of 2" 5 on 5.5 for a samurai shipped to 81631

price on 2 sets of 5 on 5.5 spacers 1.5", shipped to a business(43105)
Thanks
Jerod

All the prices on the first page are current. :D

quote for 4 1.25 inch 5x4.5 inch spacers shipped to 92109 please. thanks

Thanks
eduardo

Thanks
eduardo

Thanks
Ed

price on 2 pairs of 2'' toyota 6x5.5 shipped to 28227...

Thanks, Jason

2 pairs of 1.5" Chevy 6x5.5" shipped to 72227 please.

im looking for a set of 5x5.5 to 6x5.5 for a samurai, having trouble finding the hub size to fit the samurai.

Thanks for the orders. :)

Thanks for the orders.:smokin:

thanks for the orders. :)

Any rover spacers????

thanks

I need a price for 4 adapters, Chevrolet 6 on 5.5 wheels to Jeep 5 on 4.5 axles.

Scott

Could I get a price on 1 pair of 1/2" thick 8 on 6.5 shipped to 95252
thanks

Thanks for the orders.

2 1.5" 6 on 5.5 wheel spacers

and

2 2" 6 on 5.5 wheel spacers to 13903

any 5x5.5 to 8 x 6.5 wheel adpters available? i need 2 very soon. please e mail me
thanks andy
atstumpy13@aol.com

price on one set 5x4.5 to 5x5.5 adaptors shipped to 01518

Thanks for the orders.:)

Price on 2 5 x 5.5", 1.5" spacers shipped to 85083 please.

Thanks!

One pair of 1.25" wide 5x4.5 spacer

One pair of 1.25" wide 5x5.5 to 5x4.5 adapter

Shipped to 44017. Thanks.

I need 5x5.5 to 6x5.5 shipped to 92126

could i get a price on 2 sets or 5 on 4.5 to 6 on 5.5 wheel adaports shiped to 01529.

Thanks for the great price, can't wait to get them.

Thanks again!

Price for:
2 @ 8x6.5 2inch
2 @ 8.6.5 1.5 inch

You don't happen to have a 8x6.5 1.25 inch do you?

Shipped to 97537

Thanks!

Price and availability for two 2", 6 on 5.5 shipped to 95650.
Thanks!:smokin:

2.0" 8 on 6.5 with 9/16 studs I have the spacers, but need the lug nuts. do you sell them by them self? How much for 32?

Thanks for the orders.:)

bump

Thanks for the spacers and prompt service, JP. Ordered Tuesday and on my rig Thursday evening.

http://i704.photobucket.com/albums/ww48/cultsix/0930001156a.jpg