The title says it all. Post some pics of your rigs so that we can put a vehicle to the name.

Oh yeah, list some specs. It looks like I will be picking up a Samuria in the next few weeks so I need some ideas.

1986
Davesport cage
Canyon State YJ shackle reversal with RRO spring over
breeze crossover steering
RRO upper front shock mounts
custom lower mounts f/r
CSC upper rear shock mount
Sumo front and rear drive shafts
Wheelers front winch bumper
Trail Tough rear bumper
15x8 black steel wheels 2.75 bs with 31x10.5 TSL's
4.16:1 tcase
Petroworks skid plate
stock axles with diff caps
Jeep mirrors

soon to have
custom rocker guards (4x4 angle iron)
rear disc setup
welded rear 3rd from a spare axle
poly seats front and rear
5 point harnesses

http://home.attbi.com/~rokzuki/pics/spoa1.jpg
http://home.attbi.com/~rokzuki/pics/20011208-7.jpg

Hello

Originally posted by TexasCruiser
The title says it all. Post some pics of your rigs so that we can put a vehicle to the name.

HERE YOU GO!!!!!!!!!!!!!!!!!!:D :D

as you can tell I'm highly modified with 44" tire's four T-cases(that's about 123456789:1 low range:eek: ) I also have a Dodge Viper V10 2 1/2 ton Military axles. of coarse you can't see it in these pics cuz I dug too deep in the sand:( LOL

http://www.4play4wheelers.com/scotpic3.gif

Just your basics :p No new wheeling pix but as soon as I can get some t-case gears I will be wheeling again. These are from moab last year, I'll be there again this year but one zuk short.

My little bro driving
http://home.off-road.com/~shadow/moab2k1/image5.jpg
My dad gettin it on :rasta:
http://home.off-road.com/~shadow/moab2k1/image19.jpg

Also in Texas...

Too much to type... Specs are at:
http://home.elp.rr.com/zook/spec_sheet.htm

A current picture here:

http://root.moose.ca/~chris/images/Ptera_at_the_farm.jpg

And you can find more pics and details at

http://root.moose.ca/~chris (really out of date)

Pretty basic setup:

*1985 SJ-413 long wheelbase
* 2" OME springs
* SPOA
* Ford F-150 Rims
* 33x9.5x15 tires
* stock engine
* rocklobster 4:1 t-case (to be installed - shelfware)
* Breeze x-over steering (to be installed - shelfware)
* Lockright rear (in the mail)
* ARB bumper, Warn M5000
* custom rear bumper
* 5.12:1 axle gears
* header, cam and side draft Mikunnis (to be installed - shelfware)

Plus a bunch of other minor things.

I really need to get a cage in it - to protect myself and to get rid of the cheesey support structure required for the soft top (LWB soft tops are completely different form SWBs). Just waiting for the weather to get warmer to get at it.

I also have a "simple" SWB soft top on 31" tires and a simple SPOA, ARB bumper with M4500, etc. Nothing too radical. Plus a bunch of parts trucks.

That's about it.

Specs are on the Zuki page @
www.angelfire.com/extreme3/suzuki/

http://www.roadlessgear.com/html/roadlessfolk/images/appah.jpg

I's a Big Tawl Black man 6'3" an' ah Drav a lil black Samurai...:vader: :trooper:

an have a :beer:

'95 Samurai w/ 'factory' AC
1.6L EFI - 20 over bore, 20 milled off head, 1.3L EFI cam -4 degree timing (Torque baby! :D).
GRS II T-case gears. '87 Transmission (higher 5th gear)
Centerforce I clutch.
Dana 44 axles w/ 4.56 gears - Cut down to 58" width, high penion in rear.
33" TSL Radials on 15x8.5 Beadlocks.
Stock Sami steering w/ hydraulic ram assist.
Rear - 4 link coils, Rancho 9012's
Front - Spring Under (using rear Calmini 5" springs), Rancho 9010's, special designed shackles and 'Shackle Stabilizer'.
83" Wheelbase
4 wheel Disc brakes (Sami front on rear, J@@p Disc and 3" piston ford calipers on front).
Detroit Soft Locker (the real one :p ) in rear, ARB in front.
Quickair II, nerf bars provide storage (~2 gal capacity)
Ramsey 5000 on custom receiver mount (soon to be a Warn X8000i, inboard bumper).

All work done by myself, with help from my friends! :rasta:

heres mine
http://community.webshots.com/storage/1/v0/4/60/90/28746090AOZbIHJJhN_ph.jpg
early 88 samurai tin top
6" SPOA
rears up front
missing links
raised front shock towers with lower axle mount
angle iron rocker pannels
custom z-link steering
66 vw bettle front break lines
31" trail masters(going 33"s)
15x8" steel spoked rims
welded rear
custom front and rear bumpers
6000lb. winch in front
.......i think thats it.......
:flipoff2:
l8r
-Mike

Here's mine....

http://www.coalcreekmining.com/Pictures/2001/11-18%20Rattle%20Rock%20-%20from%20Chris%20Robbins/MVC-003F.jpg

'87, SPOA, locked, 5.13's, GRSII, 33's on beadlocks.

You can see mine all over my website.. but I dumped 2 pix from last weekend on a temp page if you wanna see a sami with about 3 feet of air under the tires (not at the peak of my jump either).

www.abusivemotorsports.com/dunes_temp.htm

GRS1
Sprung over with rear springs all around
Welded rear
Lock Right front
32's
Header/2" exhaust/Flowmaster
Cut front fenders
Lots of other crap...

Old picture:
http://a8.cpimg.com/image/28/5C/8232488-20c1-028001E0-.jpg

New picture:
http://a1.cpimg.com/image/B5/26/8540341-dd50-028001E0-.jpg

Specs: '88.5, stock motor/tranny, 4.16:1 case, 4.56 gears, lock-right's front/rear, 33x12.50 GY MT's, 15x8 MRT beadlocks (2" bs), front/rear YJ springs, cross-over steering, DT8000 shocks, Davesport cage, etc, etc. :) More details and pics on my website (link below). ~Steve

Chris , what did you do to make your homemade missing links? did you make everything from scratch or did you use parts from different vehicles?


:D

Hey fatkid, what do you think of the 33 inch boggers? How well do they work on a vehicle the size of a suzuki?

Originally posted by kestrel
Chris , what did you do to make your homemade missing links? did you make everything from scratch or did you use parts from different vehicles?:D

I made mine from scratch. I saw a set of store bought and copied them.;)

WOWWWW!
OKrawler
that "little" play ground around the Damn looks huge when you don't have 39.5's or bigger! I've only ever seen it in magazines with the big rigs playing on it (big is relatively speaking, I'm not saying your zuk is small).
That's pretty cool!
Dave
aka Shogunator

1987 sami
5.5" SPOA
1" shackle
AAPA Sumo 2 head and low end cam
33x12.50 GY MT/R's 15x8 black spokes
Centerforce Dual friction clutch
4.16 t-case gears in a week
rear locker in a week
Alot more to come.........


pics can be seen atmy sight. (http://www.jp008.com)

Motor: 1.3, FI. Bored .20, K&N filters (snorkel and factory locations), Isky cam, Thorley header, snorkel, battery on drivers side, 100 amp GM alternator

Body: Custom paint, Diamond plate (rockers, above rear bumper, targa), Custom bumpers, custom lighting (stop, turn, tail), Farm All jack, steel horse top, Ramsey 8000lb winch, hood pins, aux. reverse light, 2 extra front driving light sets (1 bumper mount and 1 radiator support mount)

Interior: Diamond plating (doors, glovebox, quarter panels), Jazz racing seats (and covers), RJH 5 point harnesses, Pioneer stereo, Midland CB, Fire extinguisher, flashlights, lighted tilt meter, Gerber, thermometer / compass, and first aid pack, quick disconnect door straps, volt meter, oil pressure gauge

Suspension: YJ's on rear with custom front brackets, 4" Breeze missing links all around, Doechtech 8000 series shocks, custom upper and lower shock mounts, Sammy rear springs up front, Custom cross over steering, Calmini stabilizer, 3" drop pittman, braided rear brake lines

The axles have Breeze Birfield rings, 5:38 gears and the rear is Lincoln locked and the front is Lock Rite. I use 2.5” Billet alum. Spacers and the front axle is moved forward 2”, stock transmission and transfer and the whole thing is on 35-12.5-15-mud terrain with 2” backspaced wheels.


:bounce:
http://bbs.off-road.com/wwwthreads_uploads/53-658204-signature.JPG

http://www.sonic.net/jkwaters/images/clipfront2.jpg

The endless project.....!

87 lwb
16v 1600
toy tranny and dual toy tcs
88 toy rear
Allpro d44 hybrid front with fj80 hipinion
5.29s and detroits
35" mtrs on MRT beaaadlocks
yj sr in front, cjs with mls in back, bilstein shocks

lots of other stuff, hopefully done really soon....

cause I'm going to az's house!!!!

Originally posted by TexasCruiser
Hey fatkid, what do you think of the 33 inch boggers? How well do they work on a vehicle the size of a suzuki?

They seem to work well at the Hammers, although I'm going to have to invest is some Beadlocks. As soon as we have the time in the next week or so Tin Bender and I are going to do some cutting on them as well to add some lateral traction. I guess we'll see.:)

Originally posted by scwafish
http://www.sonic.net/jkwaters/images/clipfront2.jpg

lots of other stuff, hopefully done really soon....

cause I'm going to az's house!!!!

I got a nice spot right in front of my RV gate waiting for ya :D

Originally posted by scwafish

The endless project.....!
Allpro d44 hybrid front with fj80 hipinion


SWEET
What's you width?????
Is the hybrid extra wide or offset wheels??

dumb,
Yea that's one of the problems with building a BEAST. It takes all the challenge out it! I like my Suzuki!
:p PUCKER FACTOR RULES :p

What's you width?????

I forget how wide the d44 hybyd is, but just a bit wider than an ifs toy rear. My wheels have 3 inch back spacing. The overall width (outside of tire to outside of tire) is around 77-78 inches, pretty wide for a zuk, but still skinny compared to something on fullsize axles.

It's undergone some upgrades since this photo was taken: TJ Bushwacker flares, SUMO rear driveshaft, SUMO 6.1 gears, Yukon 4.57's, and 6-pack rear YJ springs. The mods are always ongoing.
http://www.off-road.com/~beasley/zukiman.jpg
By the way, with my 33x14.50's on 2-inch backspaced wheels on stock axles, my track width is almost as wide as Scwafish's. The super-wide TJ flares I have now still leave about 1.5 to 2 inches of tire hanging outside the fenders!

An IFS rear axle is 58" wide.

I don't know wide AllPro's hybrid unit is, but you could call them and find out. Here's a pic, for no real reason:
<img src="http://www.allprooffroad.com/pics/4391.jpg">

Originally posted by Yota_san
An IFS rear axle is 58" wide.


I guess it just looks wider with no fenders :rasta:
:D :D Super clean rig :D :D

Jayson has someone else's hybrid that measured about 8" wider than a pre IFS Toy. I don't think fender flares is gonna help him.. :p (But, it does use all STOCK D44 axle shafts....)

hey grumpy ...think you can post a pic for me ...i think you still have one of my zuk
zukikid

Originally posted by scwafish
http://www.sonic.net/jkwaters/images/clipfront2.jpg

The endless project.....!


Whatcha gonna do to cover the big hole in the 'clearanced' hood?

the black ones my old one that icbc wrote off , it was a completely stock 1985 sami with some nice 100w aircraft landing lights, cb etc....

the blue one is my new project, its a 1988.5 sami....
http://hyperphoto.photoloft.com/view/exportImage.asp?s=cano&i=8879647&w=256&h=171

http://hyperphoto.photoloft.com/view/exportImage.asp?s=cano&i=8919486&w=256&h=192

Originally posted by billjohn


Whatcha gonna do to cover the big hole in the 'clearanced' hood?

One of the local guys bought a dust pan, cut the handle off and glued it to the hood. Perfect hood scoop :D

Ask and you shall recieve.Well, at least within limitations.:flipoff2: LOL This pic is of Zukikid's Sammy.It was its first time out since the lift and some extra's.
http://bbs.off-road.com/wwwthreads_uploads/53-679927-zukikid2.jpg

http://www.suzuki-4wd-club.rockcrawler.com/members/images/progress/gjs-1.jpg
http://www.suzuki-4wd-club.rockcrawler.com/members/images/gjsnew3.jpg
Suzuki Sierra 1987 LWB
1.5 Toyota 5K motor & 5 speed gearbox
Rockhopper Transfer case (in lots of little toothy bits after grenading itself)
old Man Emu 2.5' rear springs all round
3/4 eliptical setup in rear
Full external cage
Custom rear tray
Rear Air Locker
Custom backspaced wheels
34" Super Swampers
2" Body Lift
Steering wheel on the right

Whatcha gonna do to cover the big hole in the 'clearanced' hood?

Not sure yet...I'm keeping my eye out for a cool and cheap premade hood bulge or scoop, or Ill get out the glass again and make one...or maybe I'l get a dustpan from AZ.

http://www.tasa.addr.com/4x4/F118.jpg

'86 LWB
6"SPOA
32"x11.5" mud kings
4.62's
weber carb
2" exhaust
K&N
Custum bumpers f+r
full roll cage

Nice looking Zuks, anyone wheel with em?:flipoff2:

http://toy4rcks.usclargo.com/images/sammy_1st_pic.gif http://toy4rcks.usclargo.com/images/prefighting_the_body.gif
This is wifes zuk going through some rentovation:beer: :beer:

Here's moms Grocery getter, not a sammy but a tracker, almost the same thing. hopefully after she gets her tax check I can talk her into a set of little TSL's;) ~NaTe

Originally posted by fatkid
Nice looking Zuks, anyone wheel with em?:flipoff2: I am from Indiana.We do not have the wheeling that you have.But to answer your question just go to my web site and you will indeed see that it is wheeled.Almost every other weekend to be precise.As in other posts of mine I would love to goto somewhere out west to wheel,but fund are tight and I don't think the trailor would make it.Here is a pic of myself "wheeling it"I broke a birfield in this hole:usa: http://bbs.off-road.com/wwwthreads_uploads/53-681504-grumpymud5.jpg

Originally posted by fatkid
Nice looking Zuks, anyone wheel with em?:flipoff2:

Hell NO! My ride never leaves the pavement.... afraid I'll scratch it!:flipoff2:

You're the only one on the board that actually Gets It Fatkid.:rolleyes:

This is as close to wheelin' as I've been in a while... my driveway....:smokin:

http://bbs.off-road.com/wwwthreads_uploads/53-650042-nov07$05.jpg

Originally posted by Grumpy...
Here is a pic of myself "wheeling it"I broke a birfield in this hole:usa:


You Know you're "muddin" when there is a pontoon boat in the picture with your Zuk!:D

Originally posted by CSR



You Know you're "muddin" when there is a pontoon boat in the picture with your Zuk!:D They got off thier boat and stayed a while to take pictures of us wheeling.I thought it was pretty cool.If the water level was up another foot or two they could have tried it themselves.:usa:

Ok, here is mine again. This was at Paragon , Ramsey Nationals, and was taken by Ken Brubaker. Awsome shot!!!!!!!!


http://home.off-road.com/~ovo/john/Ramsey-Mud.jpg

Anyone going to Ramsey Nationals this year in Paragon?????

Originally posted by Grumpy...
I broke a birfield in this hole

Grumpy, I know you're running 35's, but are you running stock axles, too? If so, what have you done to upgrade them? ~Steve

Here it is just got it 6 months ago so I don't have alot of mods:
1. 3" Calmini Spring
2. Lift shackles
3. 32'36 weber
4. Custom front bumper
5. S-10 bucket seats
6. 30" Wildcats mounted on stock wheels.
http://bbs.off-road.com/wwwthreads_uploads/28-674852-sprayed.jpg

http://bbs.off-road.com/wwwthreads_uploads/28-674852-sprayed.jpg try that 202

Originally posted by squirrelman83


Grumpy, I know you're running 35's, but are you running stock axles, too? If so, what have you done to upgrade them? ~Steve
Yes sad to say but they are still stock besides Yukon 5:38 gears, lockrite front locker and birfield rings.I am looking for a set of dana 44's to cut down to Toyota size to throw under it.Along with drop link suspension and Waggy springs.A buddie just bought a set for 100.00 a piece.(what luck):usa:

http://bbs.off-road.com/wwwthreads_uploads/53-682217-Pic00148.jpg
A pic of mine, and the wifes....Yup we go wheelin' with Grumpy!!:D
http://bbs.off-road.com/wwwthreads_uploads/53-682216-logo.jpg

Here is me and my Brother in law at Chillwack mountian in BC
nothing hard just some fun stuff hard just some fun stuff http://qualzone.com/shogun/vedder/

will have to copy and paste

Mine is the white 92
My Brother in laws is the red 91

Originally posted by Bill4rest


HERE YOU GO!!!!!!!!!!!!!!!!!!:D :D

as you can tell I'm highly modified with 44" tire's four T-cases(that's about 123456789:1 low range:eek: ) I also have a Dodge Viper V10 2 1/2 ton Military axles. of coarse you can't see it in these pics cuz I dug too deep in the sand:( LOL

you big Goof....show them "sorry daddy"...that one made me LMAO.....

Originally posted by Arizona Zuk


you big Goof....show them "sorry daddy"...that one made me LMAO.....

I told you I don't have that one anymore, send it to me or you can post it..:p

smitty808, are those blocks in the front?

smitty808, are those blocks in the front?

busted!!!:D :D :D

:rolleyes: :rolleyes: :rolleyes: :rolleyes: :rolleyes: :rolleyes:
Yup, I'm afraid so....I bought it like that, they have 50000 miles on them without flopping out. And yes the YJ springs are in the garage...hope to have them onboard for Memorial day weekend. Gotta' make the Badlands run at the Indiana Fab-Fest!!:D :D :D

http://bbs.off-road.com/wwwthreads_uploads/53-682217-Pic00148.jpg

Do I see front blocks?????:eek: :eek:

Blocks infront, taboo...:skull:

Here are my two Zuk's, one is in project mode... with yota axles, Yj springs, Missing links front and rear, 3" body lift, 2.8L V6 with 200R4 tranny, and 16x35" Boggers.
The other one has stock axles, custom SPOA, 3" body lift, rear springs up front, and 16x35" Boggers!
Here are a few pic's... you can see more at my web-page!
And Yes, I did put the Boggers on wrong, just put them on the axles to push it out from the carport to clean! :flipoff2:
http://imagehost.auctionwatch.com/preview/fi/fireman131/frontandbike.jpg
http://imagehost.auctionwatch.com/preview/fi/fireman131/feb9.JPG

http://imagehost.auctionwatch.com/preview/fi/fireman131/Brianrock.jpg

http://bbs.off-road.com/wwwthreads_uploads/53-685336-LC54a.jpg

You're welcome anytime!
The Tobasco Twister article will be on iZook at the end of the month...
(another shot of Oilburner on Tobasco Twister)

This is my buddy Jerry, the day after he got his lockers and 5.38's installed....

http://bbs.off-road.com/wwwthreads_uploads/53-685515-JERRY1.JPG
http://bbs.off-road.com/wwwthreads_uploads/53-685517-JERRY2.JPG

This is why you don't see many Samurai Monster Trucks!:eek:

[QUOTE]Originally posted by Zuk Jr.
[B]Here are my two Zuk's, one is in project mode... with yota axles, Yj springs, Missing links front and rear, 3" body lift, 2.8L V6
http://imagehost.auctionwatch.com/preview/fi/fireman131/frontandbike.jpg


What color is that paint? I like. Been thinking about giving mine a makeover when I tube the rear....

Oh yeah, here's a recent one of my Zuk:

http://www.azrockcrawler.com/_images/2002/2-02lostworld/Dscn9314.jpg

Wish the tires were mine......

Chris, the paint color is OD green! I love that color! Must be because I'm in the military? Anyway, I used the Krylon spray paint, get it at Walmart for $2.17 a can! Easy to use too!
Click here to see another pic... (http://imagehost.auctionwatch.com/preview/fi/fireman131/Feb1011.JPG)

Cool, that was my first choice in color but my wife used her veto powers and eventually we both agreed on yellow :D

yeah, I know how that goes! My wife hates the color, but hell its my truck and not hers! hehehe :flipoff2: :flipoff2:
Anyway, I kinda like the yellow color! Looks very good! I just wanted something cheap and simple! :smokin:

Looks like there are a lot of newbies since i last posted......:flipoff2:

Here is one of mine....Too much shit too list...

Yeah, there are a lot of newbies here :flipoff2: :flipoff2: :flipoff2: :D
I might be new here, but not on the other board! hehehehe!
I just have more time at the Fire Dept. to check stuff like this and wanted to get on another board and see who else is in the Zuk world!! Later

got more on my site , www.4byhigh.4t.com

-35/15/16 boggers on 12/15 super offset Black spokes.
-Custom Coiled four link rear setup
-Front, 1.5" YJ Rancho leafs
-Twin Cam 1.3 for now, 3.8 goin in.
-98 4runner seats
-Warn TJ 7" Trail Flares
-Custom rear bumper , Front one being built
-Toy axles W/5.29s
-Cross over stearing
-toy CV shaft
-CD player, top , lights CB and a bunch of other junk.

39.5s goin on after the engine is in and the 3" body lift is in.

http://community.webshots.com/storage/1/v1/6/97/28/22969728EbKneNhULI_ph.jpg