got any? Post them, I am contemplating doing this, but am not sure as of et

Dimitri

you can see mine in person in a couple of weeks I am almost ready for the swap. just need tires and rims. Did you get the eb instead of the cruzer?

Got the Bronco in a trade. I know I don't want to build up my stock axles, when I can get some full width axles for pretty cheap. I just gotta go looking for them. A full width 44 front is a dima a dozen at the yards, and the 60 rear is even easier to find. I just gotta figure out if I wanna do this not or later.

Bent, I wanna come check that thing out when you are done. et me know.

Dimitri

You live on 23rd, right off Balboa??? I drove by a primer grey Bronco and a lifted ZJ last night.

Lookin' PHAT!!!

I guess you can build up the front axle and use the same parts later on the fullwidth 44. If you want I can probably sell you a 9in. third with 4.10 and a detroit for cheap. But eventually you will go fullwidth anyways so you can do it now instead of spending more money going through stages.
rocktoy- yep thats my junk.:D

could use the 9" center, but then again, I can get the 44 and 60 with the 410's in them stock, and then just weld up the rear. I think I will just do that later. befire I dump money ito my junk.

Dimitri

thats what I am doing, not building up the stock and going fullwidth but more importantly 1ton.
got to go to work:mad: hour late

thomas's bko, full width nine and 44, crappy side shot but its all i have.

I don't have any pics, but imange 3 more inchs sticking out, i have seen a lot of them, it looks cool

heres a couple:
http://mike.sierrabronco.com/photo.html

79 bronco front 44 , 77 f150 9" rear , 36x12.50 sx , 8"wheels

your welcome to come look at it anytime, just south of Walnut Creek

How did all these people fit the full widths into there EB's??? my freind has a 75 bronco and 78 bronco axles sitting next to it

flatty, you should have bought mine all done. anyways i still have the hp 44. all setup to bolt in.
5:13 gears and a detroit locker. 900 bucks.
pat

63 inch wide 60's
10 inch rims w/ 3.5 inch B.S.
42 inch tires
the front axle's for sale!
35 spln, 4.88, A.R.B.,5on5.5, std. rotation, dynatrac
2.7k

another picture

JR...

What did your 63" wide 60's come out of?

Originally posted by JoshC
JR...

What did your 63" wide 60's come out of?
They were both custom made

Heres a pic of mine, I'm in the middle of the swap right now, just seeing how things fit in this pic. Theres also two trip reports with many pics at the classic bronco site with in the last month from AZ. with a guy named AC who has fullwidth axles with really shallow back spacing on his rims almost looks like double full width axles.
I have some pics he e-mailed me I can send you or you can contact him on the classic broncos site his member name is RockPilot.
http://dynamic-earlybroncos.classicbroncos.com/images/f.e.front_fullwidth_3.jpg

Originally posted by NE-RokToy
How did all these people fit the full widths into there EB's??? my freind has a 75 bronco and 78 bronco axles sitting next to it I originally got a 78 Bronco Dana-44 I didn't use it because of the one-piece cast ends couldn't adjust the wedges the way I wanted to.
I moved the c-bushing wedges in 2" and drilled the holes in the lower spring cups over 1" to get the lower spring mount directly under the upper spring mount.
As far as the rear housing, just remove and adjust the spring pads for the width of the leafs, make sure you know how to set the pinion/ leaf spring pad orientation.

http://dynamic-earlybroncos.classicbroncos.com/images/front_view_nutrak_mnt.jpg
http://dynamic-earlybroncos.classicbroncos.com/images/rear_view_welded_trk_mnt.jpg

Originally posted by frankellett
Heres a pic of mine, I'm in the middle of the swap right now, just seeing how things fit in this pic. Theres also two trip reports with many pics at the classic bronco site with in the last month from AZ. with a guy named AC who has fullwidth axles with really shallow back spacing on his rims almost looks like double full width axles.
I have some pics he e-mailed me I can send you or you can contact him on the classic broncos site his member name is RockPilot.
http://dynamic-earlybroncos.classicbroncos.com/images/f.e.front_fullwidth_3.jpg

Yea man! E-mail the pics to: marbourg@lanl.gov

Thanks!

--D

frankellet
Is that uncut,If so whats the bs on the rims?

Originally posted by Flatty
Got the Bronco in a trade. I know I don't want to build up my stock axles, when I can get some full width axles for pretty cheap. I just gotta go looking for them. A full width 44 front is a dima a dozen at the yards, and the 60 rear is even easier to find. I just gotta figure out if I wanna do this not or later.

Bent, I wanna come check that thing out when you are done. et me know.

Dimitri
\
Go for it. I ran full width under my EB for awhile and it's just fine.

Originally posted by bent70
frankellet
Is that uncut,If so whats the bs on the rims?
I think your asking is that housing uncut, it's uncut.
Backspacing is 3.5; I would like to go with 4.5 backspacing and maybe a narrower width rim, maybe on that.

thanks, sorry about not being clear.
I think I am going with a 9.75in. rim w/4.5in. of bs. using and 15in. wide tire. Thats the narrowest I can go for now without the hummer rims I was supposed to get.:mad:
goodluck :beer:

here's a shot of mine with the front 60, full width with transport rims (haven't gotten the hummer rims to mount up the 38.5's yet...

Those are some sweet rigs. I wonder how much my 44 and 9" are worth? They are out of a 77 so they have disc brakes up front, and the rear is I think a nodular, big bearing, 31 spline 9 inch. All I want to do is find a matching set of RC44 and 60.

Broncoboy, I would have bought your stuff, but that is 900 I don't have right now. If I did that, I would have to find a 5.13 gearset for my rear 60 as well. I just want some stock axles for now. Weld the rear, and keep the front open unilt I cal afford a 60.

Dimitri

Originally posted by Flatty
Those are some sweet rigs. I wonder how much my 44 and 9" are worth? They are out of a 77 so they have disc brakes up front, and the rear is I think a nodular, big bearing, 31 spline 9 inch. All I want to do is find a matching set of RC44 and 60.
Dimitri
Hold onto the front end if you find a Hi-Pin D-44 w/drums swapp the knuckles and disks onto it, 77 knuckles are great as far as tie rod elevation goes, and if the rears a nodular drop that 3rd member in your full width 9 inch housing.
Heres anothe pic of A.C./RockPilot twisting it up in AZ. with his full width axles.
http://classicbroncos.com/gallery/aclarsen11.jpg

Randy Harral's EB from www.drivenautoparts.com

you can see more pics on AllOffRoad.com September Issue and at Randy's site...

Yellows EB is Ricks. Both from Phx Az.

http://www.alloffroad.com/issue/2001/september/contents/stampede/images/cinders40.jpg


http://www.alloffroad.com/issue/2001/september/contents/stampede/images/cinders40.jpg


Max backspace wheels, D60 front, GM14 rear. 38.5 SX

Randy C6 Atlas 2 FI351
Rick Np435 Atlas 2 302

http://webpages.charter.net/tt4wd/tillbuilt/cagworks/cagworks.html Hit the home button to get to the main page...my stupid IT people got my computer whacked and I can't veiw the main page.
Guy in my club. Full width with hummer rims. Air rear suspension.

Nice bronco's all. I really like the driven auto ones. The rest of thyem do not seem to be much wider than the stock setup. I think if I go full width, I want to be a bit wider than the stock width. Any one got any pics of the driven trucks? Those things are bad ass.

Dimitri

They are the m&m club.

Full width axles under all the rigs, red, yellow, blue, green..


dimitri AOR september 01 Issue