Have a CJ-7 building the suspention right now.I only bought the frame and body so i didn't have any thing too measure from.What i need is the measurement from the top of the axle tube too the bottom of the frame where the bumpstops mount.I need this for the front and rear.I looking for measurements from people with 4-6 inchs of lift.If you could also tell me your setup(SOA,SUA-2 inch,4 inch springs ETC.) when you give me the numbers this would help.I building a link suspention and need these type of measurements too help me get it setup with proper lift built in so i can set pionin angles and get the links angled properly.Thanks for any Help.