Guess ill post it again cause i forgot to out a location in and it appears it was deleted.

temecula, california ford bronco axels from superiorbrand new. i beleive there part number is EV90. i bought them for a 68 bronco 31 spline. bought for 235 a piece will sell for 425 for the pair.they are not the correct lug pattern for me thats why i cant use them. 5 x 5.5 is the lug pattern. need to sell asap so i can get a new set on order

Gregg

Guess ill post it again cause i forgot to out a location in and it appears it was deleted.

temecula, california ford bronco axels from superiorbrand new. i beleive there part number is EV90. i bought them for a 68 bronco 31 spline. bought for 235 a piece will sell for 425 for the pair.they are not the correct lug pattern for me thats why i cant use them. 5 x 5.5 is the lug pattern. need to sell asap so i can get a new set on order

Gregg

Send them over to Dutchman, Moser and get them redrilled. What lug pattern do you need? If 5 on 4.5 then they can do it, if 6 on 5.5 I don't think they can. You might want to get wheel adapters, that's an option too.
Troy

im a machinist by trade so redrilling htme wouldnt be a problem. the problem is that the flange the bolt circle is in has an extra hole in it like a 1 inch od hole between two of thestud holes which will not allow me to redrill all 5 stud holes. I need a 5 x 4.75 lug pattern its for a chevy s10. alos my wilwodd small bearing brake kit requires a flange no bigger then 6.47" and the axels have a bigger flange then that so i just want o order a set from currie or somehwere else that are ready to go

no intrest at all? man that sucks guess ill try tog et them redrilled