|
pavelow 02-08-2002, 07:27 PM My buddy has a 85 F150 with a 208. He wants to know if he can get a flange for the back end of the tranny instead of having the slip yoke. Anyone know if there is a kit, or a swap from another transfer case for this? Thanks....... Chad H 02-08-2002, 08:04 PM :question: Am I the only one not understanding this Question? The 208 isnt a slip yoke design... pavelow 02-08-2002, 08:12 PM maybe I worded it wrong. He wants a flange off the transfer case, to the rear driveshaft. It is a slip in yoke, and he wants to know if there is a way to put a flange there instead of the slip in. That help? Chad H 02-08-2002, 08:24 PM The Np 208 has a Flange...Not a slip Yoke.... I mean its a yoke that slides in and has a 1 1/4" nut... I guess this "Could" be called a slip yoke.. Then again I am :beer: pavelow 02-08-2002, 09:11 PM Well his 208 has a slip in yoke at the transfer case form the rear driveshaft.....so someone is...:smokin: Unless its not a 208. I personally haven't seen it, and have no clue what came on them in 85. He told me its a 208. have another....:beer: Chad H 02-08-2002, 11:07 PM Pavelow, pass it this way man cause I've yet to see a 208 with a slip yoke style driveline.. Maybe a 1356 has a slip type, not sure though..Havent had one...:rasta: FordPowr 02-10-2002, 10:47 PM Originally posted by DaBeef Pavelow, pass it this way man cause I've yet to see a 208 with a slip yoke style driveline.. Maybe a 1356 has a slip type, not sure though..Havent had one...:rasta: I think it's only the broncos that got the fixed yoke....Every 208 in F150's I've seen has been the slip yoke style. And to answer the question you can just change the tail housing between the 2, but it'd prob just be easier to swap t-cases. 208's are usually pretty cheap and easy to come by. Chad H 02-10-2002, 10:50 PM Really I did not know this... Good Info Fordpower :D srbtjeep 10-26-2003, 08:23 AM Broncos had a fixed yoke, F-150 pickups used a slip yoke. 82F100SWB 10-26-2003, 08:40 AM Not all F150's got a slip yoke... I just pulled a fixed yoke 208 out of an 82 F150 long bed, 351w/C6. bobbywalter 10-27-2003, 04:24 AM good catch cause thats where one of my donor 208s came from. i use a jeep 208 in my ranger with a v8 and aod. u use the 208 ford input shaft and the tailhousing and fixed output shaft and speedometer gear. so whether you want to swap parts or cases...its a go pave head. | |