yield2me
12-29-2004, 07:18 AM
Just checking the interest on my Dana 60. Since I am building a new truck with Rockwells, I am going to downsize the other.
Here are the specs-
*Dana 60 Depot Rebuild (Army maintenance). When I got it (Dec 02) it had been painted black, but from the knuckles out was still maroon primer. The rotors/calipers are all new. In the last 2 years, I have prolly put 3000 miles on it. Betweem rebuilding the truck, and the fact that I have spent about 14 months away home due to Army obligations, it has mostly sat in the garage.
*35 spline outers with new spicer u-joints
*New Warn 35 spline lock-outs
*Detroit locker
*Heavy Duty differtial cover. Forgot what brand, but its SUPER thick. Its brand new, I just bought it off of Ebay before I left back in May.
*Rockstomper Rockrod, Draglink and x-over arm
*Rotors have been ground enough to fit 15" rims with 2.5" of backspacing.
I am going to keep my 1.5" ram, but the tabs are still welded to the housing/tierod for future ram.
For EVERYTHING LISTED ABOVE---2200.00
ADD IT UP>>>>You WILL NOT FIND A BETTER DEAL THAN THIS!!!!
I will also take partial trade for an 8 lug Dana 44 with flat top knuckles, 456, and a locker (Lockrite, detroit, whatever) to replace this so I can sell the whole truck. Its easier to sell for less and have a weaker axle, than more with a 60. My potential buyers dont know what a 60 is!!!!
Right now I am in Missouri, but leaving for North Carolina in a few hours, so give me a day or too to answer any questions. I would really rather due a partial trade so the down time isnt so bad!!
Thanks.....Rob
Here are the specs-
*Dana 60 Depot Rebuild (Army maintenance). When I got it (Dec 02) it had been painted black, but from the knuckles out was still maroon primer. The rotors/calipers are all new. In the last 2 years, I have prolly put 3000 miles on it. Betweem rebuilding the truck, and the fact that I have spent about 14 months away home due to Army obligations, it has mostly sat in the garage.
*35 spline outers with new spicer u-joints
*New Warn 35 spline lock-outs
*Detroit locker
*Heavy Duty differtial cover. Forgot what brand, but its SUPER thick. Its brand new, I just bought it off of Ebay before I left back in May.
*Rockstomper Rockrod, Draglink and x-over arm
*Rotors have been ground enough to fit 15" rims with 2.5" of backspacing.
I am going to keep my 1.5" ram, but the tabs are still welded to the housing/tierod for future ram.
For EVERYTHING LISTED ABOVE---2200.00
ADD IT UP>>>>You WILL NOT FIND A BETTER DEAL THAN THIS!!!!
I will also take partial trade for an 8 lug Dana 44 with flat top knuckles, 456, and a locker (Lockrite, detroit, whatever) to replace this so I can sell the whole truck. Its easier to sell for less and have a weaker axle, than more with a 60. My potential buyers dont know what a 60 is!!!!
Right now I am in Missouri, but leaving for North Carolina in a few hours, so give me a day or too to answer any questions. I would really rather due a partial trade so the down time isnt so bad!!
Thanks.....Rob