are the ford bellhousing the same for both the FORD NP435 AND t18? novak-adapt shows a different bolt pattern, but i always thought they were the same. just asking b/c, as you can tell from my other THREAD, i'm having a hard time finding a bellhousing and the ones i can find are for the NP435 and i've got a T18. thanks for the help- russel

I looked at and used both. Should be the hourglass with 4 studs....one at each outside corner of the top of the glass and two at each outside of the bottom of the hour glass design.

Make sure they aren't referencing the Jeep T-18. Input spline should be the same as well, although I'm not sure on that.