|
BadAZYj 02-11-2002, 04:30 PM Hey guys, Just wondering if anyone has a bellyup (teraflex, or bayougeep) skidplate and Atlas II case in a YJ. If so how much bodylift was needed to clear it? I have neither right now but am looking to buy both nut dont want to waste money if they wont work. Thanks.:confused: mountain bronco 02-11-2002, 04:33 PM OK my reply is reference to a TJ... BUT I am in the process of doing this with a 1" BL general consensus is..... Get a BFH and beat on the floor pan and it fits great.. 2" Body Lift no problem, but I did not want to go 2" TJ99 02-11-2002, 04:47 PM I have a tera bellyup with an Atlas in my TJ. I used a one inch body lift and reworked the floor to make it fit. Was not to bad of a job. When I was done it all fit but would rub from time to time so I made a 3/8ths inch spacer for the belly up, didn't want to work on the floor any more. BadAZYj 02-11-2002, 05:22 PM Sounds good, I have a 1" body lift laying around and really dont want to go to 2":D | |