|
NineInches 01-08-2005, 01:37 PM driver and passenger side flat top knuckles from an 81 dodge ramcharger dana 44. 5 on 5.5 bolt pattern $100 OBO make me an offer, please. I have the whole axle minus the shafts also. If you want the whole thing it is $100 firm. harleykeith 01-08-2005, 02:36 PM hey shoot me your phone number and a good time to call you harleykeith2003@yahoo.com NineInches 01-08-2005, 03:16 PM 214-725-2031 i get off work at 8pm tonight and I'm off all day tomorrow. you can call anytime. Frank TJ 01-09-2005, 08:59 AM Hey man do you know if those will work on a 79 Bronco Dana 44? Spawn_X 01-09-2005, 11:39 AM Hey man do you know if those will work on a 79 Bronco Dana 44? nope. the stud pattern is different. you need my flat tops. :flipoff2: NineInches 01-09-2005, 02:02 PM nope. the stud pattern is different. you need my flat tops. :flipoff2: I dont know for sure, but the stud pattern should be the same as a bronco. 5 on 5.5 DanTheMan 01-09-2005, 02:22 PM Will these work on an Early Bronco (73) dana 44? Also, can i get some pics. Email is: dantheman4u@csufresno.edu Thanks, -Daniel Spawn_X 01-09-2005, 04:45 PM i'm not talking about the LUG pattern, i'm talking about the knuckle stud pattern. ramcharger is 6 stud knuckle pattern, the ford d44 stuff (disk brake) is 5 stud knuckle pattern. Both are still 5x5.5 lug pattern, but not the actual knuckle. as for the 73 ford, if it has drum brakes then I believe they also have a 6 stud knuckle. the studs i am talking about are the ones on the knuckle that the brake caliper mount and spindle go into.. :flipoff2: NineInches 01-09-2005, 08:11 PM You are correct, but I was going to let the whole outers go with the knuckles. | |