These are good sh!t....what else do I need to say? :D :smokin:

Specs:
Completely Rebuildable
Made in USA
9/16" Bore
.188 Wall Dom Outer tube
2 5/8" OD of Housing
2 5/8" Wide at bolt bore flanges.
Nickel Plated Ball
Oil Injected Nylon Races (Minimal Wear)
Zinc Plated threaded retainer, washer and snap ring
Stainless Steel Set Screw
Zink grease zerk fitting

Singles, Call For Price
Qty Discounts for 4 or more.

Thes are in stock and can ship immediately. Please give us a call.
Do not PM or post here asking for a price or shipping quote, please just call for the best customer sevice! :D :D :D

330-549-9082


Thanks,
Larry

Seriously, how the heck do you guys do stuff like this for these prices. With REs price increase these are well over $10 cheaper and they appear to be made better!! :eek:
Can you guys make these with threaded rod welded on to make adjustable links? That would be pimp! :grinpimp:

As always... :smokin:

That is an awesome price. I second the adjustability can you guys do that 3/4-16?
jim

How many degrees of misalignment can you achieve with them?

27 degrees


-Jason@mad

Are these the same size as the ones that allpro uses cause I want to build joint shackes. Thanks

Well, I am not sure. All the sizes are listed above so maybe ask this in the yota forum and someone can answer.

thanks,
Larry

wow, I was pondering RE joints for my toy buggys links but these might be a better option. Definitely more inexpensive. One question though, why nylon for the races? wouldnt UHMW-PE be a better option? Im not a materials expert or anything, but I use UHMW-PE between the leaves in my K5s springs and man that stuff is durable. If its cold flowing on me, its so slow I'll be 849827 years old before it effects performance.

anyway, yeah, I second the call for pre-welded-on threaded rod. how long are those prices good for?

j

wow, I was pondering RE joints for my toy buggys links but these might be a better option. Definitely more inexpensive. One question though, why nylon for the races? wouldnt UHMW-PE be a better option? Im not a materials expert or anything, but I use UHMW-PE between the leaves in my K5s springs and man that stuff is durable. If its cold flowing on me, its so slow I'll be 849827 years old before it effects performance.

anyway, yeah, I second the call for pre-welded-on threaded rod. how long are those prices good for?

j

I will answer this one, we have tried UHMW on this product as well as our other joints. It does not work well where there would be a load or shock. It initially deforms or compresses and becomes loose and noisy. This is fixable by adjusting but we felt it was an inferior plastic. We have switched to the special nylon to overcome this condition and it has worked very well for almost a year of testing.

Are these the same size as the ones that allpro uses cause I want to build joint shackes. Thanks

To answer this matter, they are in the works already. Stay tuned to our dealers.

I will answer this one, we have tried UHMW on this product as well as our other joints. It does not work well where there would be a load or shock. It initially deforms or compresses and becomes loose and noisy. This is fixable by adjusting but we felt it was an inferior plastic. We have switched to the special nylon to overcome this condition and it has worked very well for almost a year of testing.

very interesting. Again, Im not a materials expert and I havent done the testing so its good to get the info from someone who has. thanks much. Last question, how long is this price good for?

j

The price is good for a limited time. How limited? Who knows :D

Thanks,
Larry

I gotta ask ??? is this a jeep only thing ?? what kind of springs will these fit ?? got a pic of one on spring ?? very nice product !!


I

To answer this matter, they are in the works already. Stay tuned to our dealers.

Larry, I am confused...does Mad make these or Summit Machine?

do you have to set pre-load like the re's? any special tooling requiring for assembly? thanks

Larry, I am confused...does Mad make these or Summit Machine?

I'm guessing Summit Machine.....

They also manufacture the Jimmy Joints for Poly Performance and were the original manufacturers of the RE Joints, before RE bought their own tooling to do it all in-house...

price on 4 diffently but most likely 16

Price on 4 and 8.
thanks Joe

Is there enough material to drill these out for a 5/8" bolt?

price on 4
Thanks

price on 4 please

thanks

price on 4 shipped to 96150 :grinpimp:

Is there enough material to drill these out for a 5/8" bolt?

I wouldn't recomend it. That would only leave .070 wall thickness on the neckdown of the ball.

price of 4 sent to 81657

If you need then....call us. I usually do not respond to PM's or posts because I have shops that need attending too. We are at the shop Mon-Sat and working late due to our greatly increased custom axle business.

330-549-9082

Thanks,
Larry

I just got off the phone with larry. Great guy!! i got 16 joints shipped for a great price. Seriously guys if you need somethin CALL HIM!

Thanks again for the help Larry :D

just got mine today, outstanding product. these things are beefy, i seriously recommend them, and the service was great as well.

Mark

I tried the links on you post. Could you please tell me which link and under what heading these are listed?

TIA
Nick

I tried the links on you post. Could you please tell me which link and under what heading these are listed?

TIA
Nick

Go ahead and give us a ring. These are not on the site.

330.549.9082

What is the flex degrees* ?

? :rolleyes: Oil injected Nylon races?

Hate to be pestamistic here but Nylon deforms, doesn't it?

Curious to know what set ups these have been used in and long they are lasting with what type of abuse?

Joint sounds great any Users with feeback with there use of application?

I'm still looking for Delrin races, that's the Bomb :cool2:

Thanks! I got my joints last week, and a free t-shirt!!

What is the flex degrees* ?

? :rolleyes: Oil injected Nylon races?

Hate to be pestamistic here but Nylon deforms, doesn't it?

Curious to know what set ups these have been used in and long they are lasting with what type of abuse?

Joint sounds great any Users with feeback with there use of application?

I'm still looking for Delrin races, that's the Bomb :cool2:

These have 30* of misalignment.

Nylon is extremely tough. It doesn't deform like the UHMW races. These have lasted over a year so far in some daily driven Jeep's. I feel confident that they will last alot longer, they just haven't ben out there that long. Delrin is very brittle and can break with temperature changes (not that I think they would in this application, but it's not the best material for this).

Price on 4 and 8 shipped to 95667
thanks Jon

Can somebody who has called post a price. thanks

Can I get a price on 6 shipped to Ontario, Canada? Not UPS please, even US Post would be fine...

Thanks...

Can somebody who has called post a price. thanks

Just give us a call if you are interested.

Thanks

Price for 2 shipped to 80012.

What's with all the secrecy around price? This seems kind of childish...or shady.

Just give us a call if you are interested.

Thanks

Mabey I'll just call PIG instead....

Reseller? What gives? Something's amiss here...

Secrecy? Not really. Here is what happens: I post a price and other people(meaning shops on this board) call bitching and moaning about the price. How many threads in the vendor forum actually have a price in them? Take a look at all the super sales, blow out's and BullShit spring clearance sales going on here...do you really belive that?
I also feel that if you are seriously interested in them you can pick up a telephone, if you are not you wont. If you feel you need to call another vendor go ahead. I am glad all we do is so appreciated :rolleyes: with the giveaways and such and we are so deserving of comments like that.

Larry

Touchy, touchy Larry.... look me up in your company database and then talk to me about my appreciation for you as a vendor - my name is Todd Nelson and I live in 77005.

Perhaps you need to represent yourself better than "TJ Fan" with some animated porn chick picture -- I was not aware that you are from Mad4wd -- I know, I know, you're going to tell me that it's written above your Avatar and it's in your signature, but Marketing 101 would tell you that my failing to associate "TJ Fan" with Mad4wd is a failure on your part. Just a little thought for you!

Todd,
No problem, I am going to start a "MAD4WD" vendor ID and this should have been done a long time ago on my part. I did have a price listed, then the bitching began..so what do we do?

I need the disclaimer: "The thoughts expressed here are not an actual representation of Mad4wd or....blah, blah, blah" :D under my sig.

thanks for the support Todd!


Larry

Secrecy? Not really. Here is what happens: I post a price and other people(meaning shops on this board) call bitching and moaning about the price. How many threads in the vendor forum actually have a price in them? Take a look at all the super sales, blow out's and BullShit spring clearance sales going on here...do you really belive that?
I also feel that if you are seriously interested in them you can pick up a telephone, if you are not you wont. If you feel you need to call another vendor go ahead. I am glad all we do is so appreciated :rolleyes: with the giveaways and such and we are so deserving of comments like that.

Larry

It just sounded to me that you did not want my business, correct me if I am wrong and I will be more than happy to call.....

EDIT: Just reading through the previous posts I see your reasons for saying what you did so I will call, NO hard feelings.... :beer:

14 joints shipped CA, 91411

:smokin:

So what's the price?
:grinpimp:

Any plans to make some with a larger bore than 9/16's?

:smokin:

So what's the price?
:grinpimp:

$27 ea.

Larry thanks for the advice on the phone. I got my order in good condition a couple days ago and I can't wait to get the arms made for these. The joint and adjuster together are perfect combo. And it's nice to know I'm not relying on 3/4 inch heims any more.

Got my 18 today thanks alot :) Now it is time to get to work.

Got my order in today. The nylon inserts are alot lighter than I thought they would be. Can't wait to test them out.

Another bump for Larry...

These joints work great on and off road. very quiet and and stable ride. Appears that they will hold up well for the long run.

Ill be calling again soon..

Price on 8 shipped to 95209. Thanks!

they are AWESOME...for the price...you can't beat them! Thanks!!

How much for 4 shipped to 55104

Singles, Call For Price
Qty Discounts for 4 or more.

Thes are in stock and can ship immediately. Please give us a call.
Do not PM or post here asking for a price or shipping quote, please just call for the best customer sevice! :D :D :D

330-549-9082


Thanks,
Larry


i swear no one can read anymore

i'll be calling monday so i can order some of these :)

i was wondering if the large RE joint inners would work with these? if so i can just get the outter sleeve? i built a 4 link using RE joints but decided to change design so joints are new but sleeves are weled already can you help if not how much for 4 joints

i was wondering if the large RE joint inners would work with these? if so i can just get the outter sleeve? i built a 4 link using RE joints but decided to change design so joints are new but sleeves are weled already can you help if not how much for 4 joints

These will not replace the Rubicon outers. They are different. You will have to check with Rubicon for replacment parts for there joints. Or have Larry quote you some new ones.

Question, you have the outer diameter of the tube and the bolt as 2 5/8", can't both be the same, so which one is what?
Thanks

Question, you have the outer diameter of the tube and the bolt as 2 5/8", can't both be the same, so which one is what?
Thanks

The O.D. of the housing is 2-5/8". The mounting width between tabs, or the length of the ball is 2-5/8".

I hope this helps. Our new site is up if you would like to look the dimensions are listed.

:D

thanks,
Larry

I just ordered and spoke live with Larry, a stand up guy that offers great pricing. Thanks Larry!!!

Bump for Larry, awesome products and super fast shipping.

Thanks for the props :D

Larry

can you get me a price on four air stops w/brackets thanks

:d

put my order in for 4 of these suckers today
larry is an awesome vender to deal with i will be buying more from him down the road on other projects!!!!

Another large production run finished on these pieces. Ready to ship.:D

Get em while they're hot!:mad3: :mad3:

larry,

I placed my order tonight, glad you all were still open as late as i called...

and its a 2XL in case theres any free stuff in there :D

I got them today...


Thanks Larry

I know these havent been around long...but are the nylon material in these better than the urethane inserts in johnny joints in terms of durability?

I know these havent been around long...but are the nylon material in these better than the urethane inserts in johnny joints in terms of durability?

1 year and 10K miles so far on a daily driven TJ. No grease no adjusting.

It is a superior material for the application.

Those look awsome.. I don't think this was asked so excuse me if it was but do you need or do you sell a tool to assemble these?? Also, do you sell replacement parts like the bushings for these?? I am concerned that I'll need a replacement part in the future and but you won't stock them anymore.

Thanks.

Got my joints today, Larry!

Fast on the phone and fast to ship out!!! The joints are :smokin:

Heck of a price!

Thanks!

I'll be picking up more for two other rigs I will be working on here in the next few months.

Steve

Those look awsome.. I don't think this was asked so excuse me if it was but do you need or do you sell a tool to assemble these?? Also, do you sell replacement parts like the bushings for these?? I am concerned that I'll need a replacement part in the future and but you won't stock them anymore.

Thanks.

Yes to both,

Thanks,
Jeremy