I bought a RC Dana 44 from a 79 f-250, 30 spline. Got the hubs in a box of other parts and need to know how to put the hubs together.

Does anyone know where I can find a diagram of how to assemble the hub?

Thanks

I just put one of those together.... what exactly do you want to know? 79 F150 (5 lug) spindle out -> 79 F250 (8 lug) spindle out.


-Matt

I guess the 5 lug info would help. Sorry about leaving that out. F-250 5 lug spindle out.

Thanks.

anyone?

Any old ford manuals around?

Best I could find on my first yahoo search,

earlier dana 44, lockout probably similiar

http://www.therangerstation.com/files/Dana44Axle.jpg

chad

Holly did you get that 60 to work in the rear of your YJ? Anyway it should go large ring, spring, the two pieces with the teeth, snap ring on axle, collor with fingers, plate with bolt holes, large snapring, then the cover with plastic dail.

Originally posted by RSQJEEP
I guess the 5 lug info would help. Sorry about leaving that out. F-250 5 lug spindle out.

Thanks.

Check your mail. I sent you an exploded diagram.

Thanks for the help; the diagrams were great.


(EMSOFFROAD-I'm waiting on the guy to do some welding and another guy to install the gears; might have it done in the next 2 weeks. I can't wait!

I was missing a few parts so I was looking for a blown up diagram so I can figure out what it is an order it. It's just a matter of figuring out the little stuff now like brake line adapter sizes, where the $@#! does this snap ring go, gasket here? etc. )

:beer: soon enough!

That's cool I will have to swing by on my way to VA Beach when you get it done.

:beer: is always cold in the beer fridge!

Off the top of your head, do you remember if the 3 studs on the steering knuckle are 9/16" or 1/2"?

I think they are 9/16"

You are sooo good!

Found them in a longer size too so I can use the high steer set up!

Slowly but surely....