Redneck Wheeler 79-95 Totota 4cyl. T-cases
High Clearance crossmember, mounts to the rear T-case cover.
Adds ground clearance, saves motor mounts and decreases tranny and T-case roll. Easy to install! Kit comes w/ crossmember, skidplate, mounting brackets, 7 longer 10mm rear t-case cover bolts and 2 - 1/2" bolts and nylocks. $215.00ea. + ship unless you are in Sacramento area.

I see that you have moved your post. I am gonna talk to sheldon, I know he wants one.

This weekend I put one of these on my truck! (looks great)
It all fit well and lined up perfect! The kit included everything I needed to install the crossmember and the welding was so trivial that my little brother could do it!

-Dennis

this looks very similar to the FROR kit, and you adjust the d-train lift with this like the FROR??

this looks very similar to the FROR kit, and you adjust the d-train lift with this like the FROR??



yes, this kit is similar to the FROR kit but it's alot cheaper. The good thing about this style crossmember is that it works well with a single or dual case and the skid plate protects both cases. The weld on brackets allow you to place the tranny/ tcase very high, especially if you do a body lift, and the crossmember is still un-boltable. What's really nice is that no matter what combo of tranny/tcase/single case/dual case set up you have, you don't have to worry about lining up with the stock crossmember bolts. Just place it where you want it, weld it, and you're done.

i am seeing alot of fishy first time posts on a thread for a ripped off design. not bodding well for our new vendor.:(