PDA

: Dana 60 Kingpin Parts

TPIJeep
02-13-2002, 02:28 PM
Trying to locate the kingpin bearing, cap, seal, and upper seal for a Chevy Dana 60. I found 2 part numbers for a complete kit. They are:

Spicer 706395-x
Spicer 706150-x

Does anybody have the timken numbers are any other numbers for these components? My neighbor owns the NAPA store and I want to throw him some business.
Shaker
02-13-2002, 02:33 PM
You posted this just in time........has 4 days left....looky here below

http://cgi.ebay.com/ebaymotors/aw-cgi/eBayISAPI.dll?ViewItem&item=1804584144

good luck.....:beer: :D
onetonwillysands10
02-13-2002, 03:23 PM
Originally posted by TPIJeep
Trying to locate the kingpin bearing, cap, seal, and upper seal for a Chevy Dana 60. I found 2 part numbers for a complete kit. They are:

Spicer 706395-x
Spicer 706150-x

Does anybody have the timken numbers are any other numbers for these components? I neighbor own the NAPA store and I want to throw him some business.

Here are all the part numbers and parts..
kingpin spicer part number 37302
lower bearing kit spicer 706395x( includes bearing ,race,dust
shield and seal for upper king pin.
upper king pin bushing spicer part number 41886
upper seal kit spicer part number 620058( really you will not
need to buy this seal if you buy the lower bearing kit because it is in it).
upper bearing gasket 37307.
Hope this helps you out.:D
Mo
02-13-2002, 04:30 PM
I'm going to assume this is the same for all 60 fronts? Ford, Chevy, Dodge? (ya never can tell with them weirdos)
patooyee
02-13-2002, 07:11 PM
I got mine from a place called Jim's Offroad in Tennessee, or Jimbo's, or something. He knew exactly what I needed and had it in stock. He stocks front d60 parts like no one else I have ever heard of.

J. J.
Shaker
02-14-2002, 04:10 AM
Originally posted by patooyee
I got mine from a place called Jim's Offroad in Tennessee, or Jimbo's, or something. He knew exactly what I needed and had it in stock. He stocks front d60 parts like no one else I have ever heard of.

J. J.

By any chance do you have his Phone #? I am getting ready to build another 60 front and I need parts sources.....Thanks :beer: :beer:
brector
02-14-2002, 05:55 AM
Originally posted by Shaker


By any chance do you have his Phone #? I am getting ready to build another 60 front and I need parts sources.....Thanks :beer: :beer:

Who's your daddy Shaker???

Jim's Off Road Center
(865) 482-6912

That's where I got all my crap to rebuild my front 60.

p.s. - you'll get an email after my lunch today :flipoff2: