crapr6
01-28-2005, 12:00 PM
**********************Updated WILL PART OUT******************
Ok well here it is guys, i have been selling off my toyota parts in order to get a house (long story), but i will be getting back into rockclimbing with another toyota once i get settled in.....Anyway here is what i have...
1991 toyota stander cab 4X4 (orginaly V6,5speed),but there is no motor,trans,or transfercase in vehicle. Truck has 170k miles on it. Body has NO ROT on it, but there is "ROCKCLIMBING" damage (dents,dings,and back corner of bed is smashed in).
Suspension- 4in Trailmaster IFS lift, new Toyota lower A-arm bushings,balljoints, and caster/camber adjusting bolts. Rockstomper upper balljoint spacer, Bilstien front shocks, braided frt brake lines. I sold the front locker (centersection), but i do have the stock one still (open diff, 4:10 gears).
Rear suspension is AOR 5in lift springs with milatry main spring (these are 5ins longer then stock springs to allow for more flex, which i had to relocate the front spring hanger 5ins foward), Brand new trailmaster SSV shocks, AOR shackles with new bushing. Rear braided brake line. Rear centersection was sold, but i have a stock open centersection in there with 4:10 gears
There is also a 3in body lift in this truck
Currently there is 35in BFG mud terrans on a set of 15x10 Eagle alloy rims ( looks like the Mickey Thompson classic's 10 holes), these tires clear even with truck fully flexed.
Interior is blue in color with a 60/40 split seat, have 5in door speakers,3in dash speakers, but no radio. Vehicle has A/C, P/S, P/B, vent side windows, rear slider, and bed liner.
Full from front bumper to end of transfercase skidplate..will not bend this one
Looking to get $1,000 for the truck...
Other parts for truck---
1983 toyota solid axle, with NEW toyota axle bearings,seal kit,gasket kit (everthing to rebuild solid axle), front driveshaft.
Motor- i have 2 1983 buick 3.8L V6's( Based off of the Grand Nation motor) with a turbo350 auto trans, and downey transfercase adapter with a toyota transfercase. One motor is all togeather and is all orginal and needs basic rebuild, other motor has 42k on it and has a Edelbrock camshaft P/N EDL-5487, Edelbrock 4bbl intake P/N EDL-5486, Heads are ported and polished by JESEL vavletrain inc. New oilpump set-up from Kenny-bell. This motor is apart for a inspection and can be put back togeather and WILL run.
I have motor mounts, headers, distributor, starter and all bolt on accessories to make this motor work in a toyota.
I want $500.00 for solid axle,motor,trans,transfercase,etc
If bought everthing togeather will let go for $1,300 cash.
I can deliver up to 50miles. I live in south NJ.
Thanks
Erik
P.S. i have a clean NJ title for this truck and i will try to get the pics up soon...
Ok well here it is guys, i have been selling off my toyota parts in order to get a house (long story), but i will be getting back into rockclimbing with another toyota once i get settled in.....Anyway here is what i have...
1991 toyota stander cab 4X4 (orginaly V6,5speed),but there is no motor,trans,or transfercase in vehicle. Truck has 170k miles on it. Body has NO ROT on it, but there is "ROCKCLIMBING" damage (dents,dings,and back corner of bed is smashed in).
Suspension- 4in Trailmaster IFS lift, new Toyota lower A-arm bushings,balljoints, and caster/camber adjusting bolts. Rockstomper upper balljoint spacer, Bilstien front shocks, braided frt brake lines. I sold the front locker (centersection), but i do have the stock one still (open diff, 4:10 gears).
Rear suspension is AOR 5in lift springs with milatry main spring (these are 5ins longer then stock springs to allow for more flex, which i had to relocate the front spring hanger 5ins foward), Brand new trailmaster SSV shocks, AOR shackles with new bushing. Rear braided brake line. Rear centersection was sold, but i have a stock open centersection in there with 4:10 gears
There is also a 3in body lift in this truck
Currently there is 35in BFG mud terrans on a set of 15x10 Eagle alloy rims ( looks like the Mickey Thompson classic's 10 holes), these tires clear even with truck fully flexed.
Interior is blue in color with a 60/40 split seat, have 5in door speakers,3in dash speakers, but no radio. Vehicle has A/C, P/S, P/B, vent side windows, rear slider, and bed liner.
Full from front bumper to end of transfercase skidplate..will not bend this one
Looking to get $1,000 for the truck...
Other parts for truck---
1983 toyota solid axle, with NEW toyota axle bearings,seal kit,gasket kit (everthing to rebuild solid axle), front driveshaft.
Motor- i have 2 1983 buick 3.8L V6's( Based off of the Grand Nation motor) with a turbo350 auto trans, and downey transfercase adapter with a toyota transfercase. One motor is all togeather and is all orginal and needs basic rebuild, other motor has 42k on it and has a Edelbrock camshaft P/N EDL-5487, Edelbrock 4bbl intake P/N EDL-5486, Heads are ported and polished by JESEL vavletrain inc. New oilpump set-up from Kenny-bell. This motor is apart for a inspection and can be put back togeather and WILL run.
I have motor mounts, headers, distributor, starter and all bolt on accessories to make this motor work in a toyota.
I want $500.00 for solid axle,motor,trans,transfercase,etc
If bought everthing togeather will let go for $1,300 cash.
I can deliver up to 50miles. I live in south NJ.
Thanks
Erik
P.S. i have a clean NJ title for this truck and i will try to get the pics up soon...