|
olivesman 02-14-2002, 07:56 AM i'm trying to convert from 6 to 5 lug with front waggy 44. i don't know what year it is and i need to figure it so that i know if the spindles are the right size diameter for the conversion. JEEPgOD gave me the years i need so i just need to figure out what i have. thanks a lot-russel ozarkjeep 02-14-2002, 01:16 PM you can probably get the info at the dana spicer website using the BOM on the Diff or housing. Brian E 02-14-2002, 02:23 PM If it has flat top knuckles, it is a '74-'76, and will have the correct spindles to do the swap. Just go to the parts store and get '78 Ford Bronco hubs and rotors. If the knuckles are not flat-top, then it is a '77-'80, and you will have to pull them. Scout Dude 02-14-2002, 10:07 PM Cut the tubes and count the rings...:flipoff2: NE-RokToy 02-15-2002, 09:42 AM Originally posted by Scout Dude Cut the tubes and count the rings...:flipoff2: BWAHAHAHAAH..... that was funny I say try to see if your spindles will work and if they don't its not the right year. It doesnt hurt to give it a try | |