|
doomdog666 02-02-2005, 09:13 PM ive got a 82 7 with manual steering and brakes. im wanting to install a vacuum booster off a 74 cj-5. go figure. but anyway, the booster looks good except for the seal at the rear of the booster is worn and its o.d. does not fit tight in the booster anymore. does anyone know where can i find this seal. it does have a part number, and is made by bendix, but i've called areound and nobody knows where to get one. YjJon 02-02-2005, 10:51 PM the only way to get one is buy a new booster :smokin: :shaking: lynn 02-03-2005, 01:27 PM Read this write up: http://www.bustedjeep.com/projects/yjbrakes.asp Tippy 02-03-2005, 03:59 PM Read this write up: http://www.bustedjeep.com/projects/yjbrakes.asp Did mine just like that last summer. Super easy. I just wish I could have found a booster/bracket for $20! Check e-bay if you can't find them local. JeepinDoug 02-03-2005, 09:22 PM Jeep boosters are not cheap, even on eBay. I used an S10 dual booster on CJ bracketry, works really good. | |