I am replacing a divorced Dana 24 with a married 205. What mounts does the new married 205 use other than the transmission mount?

What are you putting it in? Typically, at least on 78/79 broncos, there is a crossmember to hold the weight of the massive 205.

I am putting it in a Shortened 68 Ford F250. I see what looks like a mount on the drivers side with a flat spot and two tapped holes. Can't seem to find any pictures on the internet yet. Need to go cruz and find a truck or bronco and crawl under it.

Yes They Use A Torque Mount On The L.s. To Frame Just 2 L Brackets With Rubber Donuts Between Them

Yes They Use A Torque Mount On The L.s. To Frame Just 2 L Brackets With Rubber Donuts Between Them
X-actly. Aside from the t-case to frame mount bronco75 described, they dont have another mount. The tranny mount supports the weight, the frame mount controls the torque.

I'd take a pic for you but my junk is in pieces right now.

OK, Sound pretty easy. If I get this thing together soon. I will post a picture to make sure I did it right.

Thanks,